| № | Номер | Название | Опции | Альт |
| 1 | 86981796 | SHAFT | Rockshaft, Incl. Ref 2 | | | 2 | D50146 | BUSHING,44.68mm ID x 57.15mm OD x 38.1mm L | | | | 3 | 80710 | LUBE NIPPLE,1/8” – 27 Dryseal PTF | | | | 4 | 130228A1 | PIN,44.45mm OD x 743mm L | | | | 5 | 86625149 | SNAP RING,#175, Ext | #175, Ext | | | 6 | 86982542 | LIFT CYLINDER,Double Acting, 38.1mm Rod, 207.2mm Stroke | Three-Point Hitch Lift, 76 ID x 207 mm strk, See Figure 08-35 | | | 7 | 199243A1 | PIN,31.8mm OD x 96.5mm L | Lift Cylinder Rod End | | | 8 | 86625148 | SNAP RING,#125, Ext | #125, Ext | | | 9 | 244356A1 | PIN | Lift Cylinder Closed End | | | 13 | 86500689 | NUT,M10 x 1.5, Cl 10 | | | | 14 | 86981818 | CYLINDER ASSY.,Double Acting, 31.8mm Rod, 178mm Stroke | Three-Point Hitch Pitch, 64 ID x 178 mm strk, See Figure 08-37 | | | 15 | 199189A1 | PIN,25.4mm OD x 104.1mm L | Pitch Cylinder Closed End | | | 16 | D25277 | SNAP RING,23.5mm ID x 2.62mm Thk | | | | 19 | D33805 | PIN | Replaces 339466A1 Pin used In Production | | | 22 | 199296A1 | PIN | Tilt Cylinder Rod End | | | 23 | D25277 | SNAP RING,23.5mm ID x 2.62mm Thk | | | | 24 | 86981810 | STRUT | Stationary | | | 25 | 433059A1 | PIN ASSY. | | | | 26 | 495-11106 | WASHER,1", SAE | (1-1/16 x 2 x 1/8") | | | 27 | 86982482 | CYLINDER ASSY.,Double Acting, 31.8mm Rod, 160mm Stroke | Three-Point Hitch Tilt, 64 ID x 160 mm strk, See Figure 08-36 | | | 28 | 87317419 | GROOVED PIN,25.34mm OD x 95mm L | Pin | | | 29 | 87367 | WASHER,1.06" ID x 2" OD x 0.13" Thk | | | | 30 | D25277 | SNAP RING,23.5mm ID x 2.62mm Thk | | | | 31 | 87318216 | ARM ASSY. | Arm, Left-Hand, Incl. Ref 33 - 35; Also Includes M6 x 12 Set Screw Which Is Not Serviced Separately | | | 32 | 87318214 | ARM ASSY. | Arm, Right-Hand, Incl. Ref 33 - 35; Also Includes M6 x 12 Set Screw Which Is Not Serviced Separately | | | 33 | H363424 | BALL JOINT | | | | 34 | D149451 | BALL JOINT | | | | 35 | 365820 | BUSHING,25.4mm ID x 36.5mm OD x 22.23mm L | | | | 36 | 139100A1 | PIN,25.38mm OD x 164mm L | | | | 38 | 140028 | WASHER,10.2mm ID x 18.1mm OD x 2.2mm Thk | | | | 39 | 86500689 | NUT,M10 x 1.5, Cl 10 | M10; 10.9 | | | 40 | 300388 | BOLT,Hex, M12 x 1.75 x 25mm, Cl 8.8 | | | | 42 | 87317414 | BLOCK | Wear Block | | | 43 | 87317416 | SPACER | Spacer | | | 44 | 87317417 | SHIM | Shim | | | 45 | 814-10070 | BOLT,Hex, M10 x 1.5 x 70mm, Cl 8.8 | | | | 46 | 814-10080 | BOLT,Hex, M10 x 1.5 x 80mm, Cl 8.8 | M10 x 80 | | | 47 | 895-15010 | WASHER,11mm ID x 24mm OD x 2mm Thk | Replaces 86625253 Used On Some Models | | | 48 | 832-10410 | NUT,M10 x 1.5, Cl 8 | | | | 49 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | 1/8 PT x 21/32 | | | 50 | 434142A1 | WEAR PLATE | | | | 51 | 87317413 | WEAR PLATE | Wear Plate | | | 52 | 614-10035 | BOLT,Hex, M10 x 1.5 x 35mm, Cl 8.8, Full Thd | M10 x 35 | | | 53 | 895-15010 | WASHER,11mm ID x 24mm OD x 2mm Thk | Replaces 86625253 Used On Some Models | | | 54 | 140028 | WASHER,10.2mm ID x 18.1mm OD x 2.2mm Thk | | | | 55 | 829-1410 | NUT,M10 x 1.5, Cl 10.9 | | | | 56 | 495-81068 | WASHER,1 1/32" x 1 1/2" x .030" | 1-1/32 x 1-1/2 x 1/32 | | | 11 | 43144 | BOLT,Hex, M10 x 70mm, Cl 8.8 | | | | 37 | 43144 | BOLT,Hex, M10 x 70mm, Cl 8.8 | | |
|
|