| № | Номер | Название | Опции | Альт |
|---|
| 141854A1 | AXLE HOUSING | AXLE ASSEMBLY - rear steerable, 5.38 gear ratio, option, parts list figures 6-58 through 6-70, see figure 6-30 for axle mounting, includes: Refs. 1 - 13 | | | 196393A1 | PIN | GEAR - set, ring and pinion, 5.38 gear ratio, has 21 splines on nut end of pinion, see figure 6-47A for components, if used, includes: Refs. 1 - 7 | | | 228159A1 | GEAR-SET | GEAR - set, ring and pinion, 5.38 gear ratio, has 23 splines on nut end of pinion, if used, includes: Refs. 1 - 7 | | | 1 | NSS | NOT SOLD SEPARAT | GEAR - ring, differential | | | 2 | NSS | NOT SOLD SEPARAT | GEAR - pinion, differential | | | 3 | 196462A1 | SPACER | - bearing, 70 mm thick, if used, was 228143A1 | | | 3 | 196451A1 | SPACER | - bearing, 70.025 mm thick, if used, was 196455A1 | | | 4 | 196452A1 | SHIM | - 0.10 mm thick, bearing, was 228144A1 | | | 4 | 196453A1 | SHIM | - 0.25 mm thick, bearing, was 228147A1 | | | 4 | 196454A1 | SHIM,0.5mm Thk | - 0.50 mm thick, bearing, was 228146A1 | | | 5 | 238-8219 | O-RING,0.139" Thk x 1.296" ID, -219, Cl 8, 90 Duro | - 1-5/16 ID x 1/8 inch wide, if used, in kit | | | 5 | 238-8217 | O-RING,0.139" Thk x 1.171" ID, -217, Cl 8, 90 Duro | If used, not in kit -217, Cl 8, 1.171" ID x .139" Thk | | | 6 | 196464A1 | THRUST WASHER | - thrust, was 138800A1 | | | 7 | 196463A1 | NUT | - flanged, pinion gear | | | 8 | 140954A1 | SHIM,2.50mm Thk | (0.098"), Bearing, if used 2.50mm Thk | | | 8 | 140953A1 | SHIM,2.60mm Thk | (0.102"), Bearing, if used 2.60mm Thk | | | 8 | 140951A1 | SHIM,2.70mm Thk | (0.106"), Bearing, if used 2.70mm Thk | | | 8 | 140949A1 | SHIM,2.80mm Thk | (0.110"), Bearing, if used 2.80mm Thk | | | 8 | 140948A1 | SHIM,2.90mm Thk | (0.114"), Bearing, if used 2.90mm Thk | | | 8 | 140943A1 | SHIM,3.00mm Thk | (0.118"), Bearing, if used 3.00mm Thk | | | 8 | 140944A1 | SHIM,3.10mm Thk | (0.122"), Bearing, if used 3.10mm Thk | | | 8 | 140945A1 | SHIM,3.20mm Thk | (0.125"), Bearing, if used 3.20mm Thk | | | 8 | 140946A1 | SHIM,3.30mm Thk | (0.129"), Bearing, if used 3.30mm Thk | | | 8 | 140947A1 | SHIM,3.40mm Thk | (0.133"), Bearing, if used 3.40mm Thk | | | 9 | K395090 | TAPERED BEARING,40mm ID x 90mm OD | BEARING, ROLLER, TAPERED, Replaces 140956A1 | | | 10 | 138802A1 | OIL SEAL | SEAL - oil, 50 x 80 x 12 mm, if used | | | 10 | 196395A1 | OIL SEAL | SEAL - oil, 60 x 90 x 13 mm, if used | | | 11 | 196394A1 | CUP | - bearing, was 138801A1 | | | 12 | 138836A1 | FLANGE | - differential, 21 splines, if used | | | 12 | 196396A1 | FLANGE | - differential, 23 splines, if used | | | 13 | 3232726R91 | TAPERED BEARING | - tapered roller, if used, smaller than Ref. 9 | | | 13 | K395090 | TAPERED BEARING,40mm ID x 90mm OD | BEARING, ROLLER, TAPERED, if used, same bearing as Ref. 9 | |
|
|