| № | Номер | Название | Опции | Альт |
|---|
| 1 | R54060 | HARNESS | Front wiring, prior to P.I.N. JAK0009807 | | | 1 | R57563 | HARNESS | Front wiring, P.I.N. JAK0009807 & after | | | 2 | 515-23159 | CLAMP,5/8", Insul, 3/8" Bolt | P-type, On back of instrument panel | | | 3 | 413-620 | BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 5 | | | | 4 | 492-11038 | LOCK WASHER,3/8" | | | | 5 | 425-106 | NUT,3/8"-16, Cl 5 | | | | 6 | 515-23190 | CLAMP,3/4", Insul, 3/8" Bolt | P-type, Harness, Back of firewall | | | 7 | 413-68 | BOLT,Hex, 3/8" - 16 x 1/2", Gr 5 | | | | 8 | L18337 | CABLE TIE,9.95"-12.1" lg | CABLE STRAP STRAP - tie, 15 inch, nylon | | | 9 | 515-23159 | CLAMP,5/8", Insul, 3/8" Bolt | P-type, At rear of engine | | | 10 | 614-8012 | BOLT,Hex, M8 x 1.25 x 12mm, Cl 8.8, Full Thd | | | | 11 | 892-11008 | LOCK WASHER,8mm ID | | | | 12 | 515-23127 | CLAMP,1/2", Insul, 3/8" Bolt | Harness, P-type, at rear of oil cooler housing | | | 13 | 492-11031 | LOCK WASHER,5/16" | | | | 14 | 276-24812 | SELF-TAP SCREW,5/16" - 18 x 3/4" | | | | 15 | 495-11034 | WASHER,5/16", SAE | (11/32 x 11/16 x 1/16") | | | 16 | 515-2395 | CLAMP,3/8", Insul, 3/8" Bolt | Harness, on LH side of engine and above circuit breaker mounting plate | | | 17 | R49988 | LARGE PLATE | SPARE PART Circuit breaker mounting, use engine oil cooler hardware | | | 18 | R45475 | BREAKER | Circuit, 40 amp, 2 used without cab, 3 used with cab | | | 19 | 225-14210 | NUT,#10-32 | | | | 20 | R45468 | PLATE ASSY. | Circuit breaker mounting, with 2 slots, lower | | | 21 | R45467 | PLATE ASSY. | Circuit breaker mounting, with 3 slots, upper | | | 22 | 470-1088 | SCREW,Slotted Pan Hd, #8-32 x 1/2" | Machine | | | 23 | 492-11008 | LOCK WASHER,#8 | | | | 24 | 225-14108 | NUT,#8-32 | | | | 25 | R53471 | ELECTRICAL WIRE | WIRE Harness adapter at alternator, prior to P.I.N. JAK0009807 | | | 26 | 493-21026 | LOCK WASHER,Int Tooth, 1/4" | Alternator output terminal | | | 27 | 825-1406 | NUT,M6, Cl 8 | Alternator output terminal | | | 28 | REF | INSTRUCTION | ALTERNATOR ASSEMBLY - engine, 24 volt, 45 amperes, parts list Figure 4-14 and 4-16, mounting on Figure 2-110 | | | 29 | 515-2395 | CLAMP,3/8", Insul, 3/8" Bolt | Harness, At alternator, No longer used, Not required | | | 30 | 614-8012 | BOLT,Hex, M8 x 1.25 x 12mm, Cl 8.8, Full Thd | | | | 31 | 892-11008 | LOCK WASHER,8mm ID | | | | 32 | L129011 | ELECTRICAL WIRE | WIRE Adapter, used between R53471 adapter wire (item 25) and A187916 replacement alternator, if used | | | 33 | R52537 | HARNESS | Lead, circuit breaker to cab wiring harness, prior to P.I.N. JAK0009807 (for cab wiring harness see Figure 4-46). cab models only | | | 34 | R58602 | HARNESS | Lead, circuit breaker to cab wiring harness, P.I.N. JAK0009807 and after (for cab wiring harness see Figures 4-50 and 4-52), cab models only | | | 35 | 100885A1 | HARNESS | Adapter, harness, air conditioning models, if used, P.I.N. JAK0009807 and after, cab models only | |
|
|