| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | VALVE ASSEMBLY - steering control, for correct assembly and components, see Figure 5-006 | | | 2 | 218-5059 | HYD CONNECTOR,3/4"-16, 37 Degree x 3/4"-16, O-Ring | ADARefeRefef. 3 | | | 2a | 218-5031 | HYD CONNECTOR,3/4" - 16 Male JIC x 3/4" - 16 Male ORB | ADAPTER - straight, 3/4-16 inch flare x O-ring boss, 2-3/4 inch long, Includes: Ref. 3 | | | 3 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk, 218-5059 or 218-5031 adapter | | | 4 | 218-845 | TEE,37 Degree, 3/4"-16 x 3/4"-16, Fem Sw Run | - 3/4-16 inch flare br x flare x swivel straight thread, Includes: Ref. 6 | | | 5 | 218-5242 | TEE,3/4" - 16 Male JIC x 3/4" - 16 Male JIC x 3/4" - 16 Male ORB | - 3/4-16 inch flare branch x flare x adj O-ring boss, Includes: Ref. 6 | | | 6 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 7 | L125807 | HOSE | - 645 mm long, left-hand cylinder, Serial Range: valve-tubes | | | 8 | L125806 | HOSE | - 645 mm long, right-hand cylinder, Serial Range: valve-tubes | | | 9 | L18337 | CABLE TIE,9.95"-12.1" lg | STRAP - tie, 15 inch, nylon | | | 10 | L125316 | PIPE,15.9 mm OD x 634, 513 mm L | TUBE - steering, upper left-hand, to rod end of cylinder | | | 11 | L125318 | PIPE,15.9 mm OD x 797, 168 mm L | TUBE - steering, lower left-hand, to closed end of cylinder | | | 12 | L125322 | PIPE,15.9 mm OD x 702, 329 mm L | TUBE - steering, upper right-hand, to closed end of cylinder | | | 13 | L125320 | PIPE | TUBE - steering, lower right-hand, to rod end of cylinder | | | 14 | S9702 | CLAMP | - tube | | | 15 | 413-624 | BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 5 | - hex, 3/8 NC x 1-1/2 inch | | | 16 | 492-11038 | LOCK WASHER,3/8" | | | | 17 | D76209 | SPACER | - tubes | | | 18 | 84899 | SQUARE NUT,Sq, 3/8"-16, G2 | - square, 3/8 inch NC | | | 19 | L125323 | HOSE,12.7mm ID x 475mm L, SAE 100R2 | - 475 mm long, tubes from valve to tubes at cylinders | | | 20 | D40236 | CLAMP | - hose | | | 21 | 413-632 | BOLT,Hex, 3/8" - 16 x 2", Gr 5 | - hex, 3/8 NC x 2 inch | | | 22 | D143412 | SPACER,10.31mm ID x 15.81mm OD x 23.88mm L | - 0.94 inch thick, hose, at tubes to cylinders, if used | | | 22 | R46493 | SPACER,0.406" ID x 0.625" OD x 0.850" Thk | - 0.85 inch thick, hose, at tubes to cylinders,if used | | | 23 | 131-217 | LOCK NUT | NUT - hex, self-locking, 3/8 inch NC, grade 8 | | | 24 | L125544 | PIPE,12.7 mm OD x 318, 105 mm L | TUBE - left-hand, to closed end of cylinder | | | 25 | L125548 | PIPE,12.7 mm OD | TUBE - right-hand, to closed end of cylinder | | | 26 | 214-269 | HOSE CLAMP,#72, 4.06" - 5", Type F Worm | CLAMP - tube retaining, 5 inch, tube to cylinder | | | 27 | D38648 | BLOCK | INSULATOR - rubber, clamp | | | 28 | 218-5106 | 90 ELBOW,90 Degree Elbow, 3/4" - 16 Male JIC x 3/4" - 16 Male ORB | - 90 degree, 3/4-16 inch flare x adj O-ring boss, Includes: Ref. 29 | | | 29 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 30 | L125325 | PIPE,12.7 mm OD x 250, 141 mm L | TUBE - right and left-hand cylinders, to rod end | | | 31 | 218-5059 | HYD CONNECTOR,3/4"-16, 37 Degree x 3/4"-16, O-Ring | ADAPTER - straight, 3/4-16 inch flare x O-ring boss, Incl. Ref 32 | | | 32 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk | | | 33 | REF | INSTRUCTION | CYLINDER ASSEMBLY - steering, see Figures 5-030 or 5-032 for correct cylinder assembly and parts list | | | 34 | L125887 | PIN | - cylinder mounting, closed end, 113 mm long, if used | | | | Ref. 34 - to accomodate for excessive wear in bore, substitute with expander pin p/n 187152A1. (Base end of cylinder only). | | | | 34 | L129696 | PIN,34.92mm OD x 152mm L | - cylinder mounting, closed end, 123 mm long, if used | | | 35 | L125890 | WASHER | - special, flat, hardened | | | 36 | 131-42 | NUT,1 3/8"-12 | NUT - hex, self-locking, 1-3/8 inch NF, no longer used, order Ref. 41, L129389, shown below | | | 37 | L125419 | PIN,34.92mm OD x 195mm L | - cylinder mounting, rod end | | | | Ref. 37 - to accomodate for excessive wear in bore, substitute with expander pin p/n 187153A1. (Rod end of cylinder only). | | | | 38 | R17756 | ROD,12.7mm OD x 109.54mm L | - retaining, mounting pin | | | 39 | 413-832 | BOLT,Hex, 1/2" - 13 x 2", Gr 5 | | | | 40 | 131-70 | NUT,1/2"-13, GB | NUT - hex, self-locking, 1/2 inch NC | | | 41 | L129389 | LOCK NUT | NUT - hex, self-locking, 1-3/8 inch NF, special | | | 42 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8 PT x 21/32 inch, 1986978C1 cylinder | |
|
|