(5-16) - FRONT AXLE AND SPINDLES

№	Номер	Название	Опции
1	D138954	AXLE, FRONT	AXLE ASSEMBLY front, with single rear bushing, Includes: Ref. 2 and 3
	D138954R	REMAN-FRT AXLE wo DL	580SK
	D138954C	CORE-FRONT AXLE	Return Number
2	D137345	BUSHING,50.19mm ID x 60mm OD x 36mm L	axle, front
3	D138047	BUSHING,50.22mm ID x 60mm OD x 54mm L	axle, rear
4	800-44050	SNAP RING,M50, Ext	RING snap, axle pivot pin retaining, front
5	495-81282	WASHER,2 1/16" x 3" x .109"	flat, 2-1/16 x 3 x 1/8 inch
6	D143408	WASHER,51.56mm ID x 101.6mm OD x 1.98mm Thk	flat, special, used as spacer
7	D123684	WASHER,52.3mm ID x 114mm OD x 4.78mm Thk	thrust, 2-1/16 x 4-1/2 x 3/16 inch, front
8	D123655	SEAL,50mm ID x 60.15mm OD x 4.06mm Thk	grease
9	D127445	PIVOT PIN,50mm OD x 444mm L	PIN axle pivot
10	219-1	LUBE NIPPLE,1/8" - 27 NPTF	FITTING grease, straight, 1/8 PT x 21/32 inch
11	D143431	WASHER	special
12	495-81226	WASHER,46.02mm ID x 63.5mm OD x 3.35mm Thk	- flat, 1-13/16 x 2-1/2 x 1/8 inch
13	103-16175	SNAP RING,#175, Ext	Ring, Snap, , Axle pivot pin, rear (Replaces D25280) #175, Ext
14	G107720	CYLINDER,Double Acting, 38.1mm Rod, 85.1mm Stroke	ASSEMBLY two-wheel drive front axle, parts list Fig. 5-14
14	G107720R	REMAN-HYD CYLINDER	580SK, 2WD
14	G107720C	CORE-HYD CYLINDER	Return Number
15	218-5136	ELBOW,45 Degree Elbow, 3/4" - 16 Male JIC x 3/4" - 16 Male ORB	45 degree, 3/4-16 inch flare x adj O-ring boss, Incl. Ref 15A
15a	237-6008	O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro	8-1, 90 Duro, .644" ID x .087" Thk
16	13-1638	BOLT,Hex, 1" - 8 x 2-3/8", Gr 5, Full Thd	; No Longer Used, For Service Order 446106A1 Bolt Hex, 1"-8 x 2 3/8", G5, Full Thd
16	446106A1	BOLT (MACHINE),Hex, 1" - 8 x 2 3/8", Gr 5
17	D36505	WASHER,26.99mm ID x 47.63mm OD x 2.38mm Thk	1-1/16 x 1-7/8 x 9/64
18	D123806	LINK, CONNECTING	LINK steering
19	D125340	SPINDLE	ASSEMBLY right-hand
20	D125341	SPINDLE	ASSEMBLY left-hand, not shown, Includes: Ref. 21
21	D127507	BUSHING,22.33mm ID x 32.25mm OD x 25mm L	D125340 or D125341 spindle
22	D150155	PIN,22.2mm OD x 89mm L	steering link
23	219-89	LUBE NIPPLE,45 Degree Elbow, 1/8" NPTF	FITTING - grease, 45º, 1/8 PT self-tapping x 25/32 inch
24	413-632	BOLT,Hex, 3/8" - 16 x 2", Gr 5	- hex, 3/8 NC x 2 inch
25	492-11038	LOCK WASHER,3/8"
26	425-106	NUT,3/8"-16, Cl 5
27	D57486	PIN	- kingpin lock
		Part of kingpin kit P/N D103626.
28	80679	LOCK WASHER,1/20.507 CST ZND	WASHER, LOCK, 1/2"
29	425-118	NUT,1/2"-20, G5	hex, 1/2 inch NF
30	A27602	THRUST BEARING,2.041" ID x 2.9475" OD x 0.635"	BEARING roller, spindle
		Part of kingpin kit P/N D103626.
31	D123865	PIVOT PIN,50.8mm OD x 168.91mm L	KINGPIN front axle
		Part of kingpin kit P/N D103626.
32	219-89	LUBE NIPPLE,45 Degree Elbow, 1/8" NPTF	FITTING - grease, 45º, 1/8 PT self-tapping x 25/32 inch
		Part of kingpin kit P/N D103626.
33	100-21237	SNAP RING,2.375", Int, #237	Ring, Snap, , Brg (Replaces A27463) 2.375", Int, #237
		Part of kingpin kit P/N D103626.
34	D72371	WASHER,3.17mm ID x 60.2mm OD x 4.57mm Thk	SPACER kingpin
		Part of kingpin kit P/N D103626.
35	238-5139	O-RING,0.103" Thk x 2.175" ID, -139, Cl 5, 75 Duro	Kingpin seal -139, 90 Duro, 2.175" ID x .103" Thk
		Part of kingpin kit P/N D103626.
36	A28230	NEEDLE BEARING,Needle, 50.78mm ID x 60.34mm OD x 25.4mm W	BEARING needle, kingpin
		Part of kingpin kit P/N D103626.
37	D72372	WASHER,50.85mm ID x 69.6mm OD x 0.81mm Thk	thrust, bearing
		Part of kingpin kit P/N D103626.
38	D61297	SEAL,50.8mm ID x 60.22mm OD x 6.4mm Thk	oil
		Part of kingpin kit P/N D103626.
39	495-11094	WASHER,7/8", SAE	flat, 15/16 x 1-3/4 x 1/8 inch
40	100-1687	SNAP RING,#87, Ext	Ring, Snap, , Pin (Replaces D71829) #87, Ext
	D103626	PACKAGE	KIT kingpin, Includes: Ref. 27 and 30 - 38, quantity in kit services one side of axle