| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | CONTROL VALVE - backhoe, parts list Figures 314 and 316 | | | 2 | 113-412 | BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5 | | | | 3 | 192-23 | LOCK WASHER,1/2" | WASHER, LOCK, 1/2" | | | 4 | 129-105 | NUT,Hex, 1/2" - 13, Gr 5 | | | | 5 | 218-5063 | HYD CONNECTOR,7/8" - 14 Male JIC x 1-1/16" - 12 Male ORB | ADAPTER - straight, valve ports, Includes: Ref. 6 | | | 6 | 218-5008 | O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro | - adapter | | | 7 | D99157 | HOSE | - 51" (1295 mm) long, from upper valve port | | | | D99157 hose (Ref. 7) and D99146 hose (Ref. 8) are switched around at hydraulic tubes (Ref. 23 and 24) on models with hand swing. | | | | 8 | D99146 | HOSE | - 47" (1193 mm) long, from lower valve port | | | | D99157 hose (Ref. 7) and D99146 hose (Ref. 8) are switched around at hydraulic tubes (Ref. 23 and 24) on models with hand swing. | | | | 9 | D99151 | CLAMP | - hose, includes two halves | | | 10 | D99822 | BUSHING | GROMMET - hose | | | 11 | 113-178 | BOLT,Hex, 5/16" - 18 x 4-1/2", Gr 5 | - hex head, 5/16" - 18 NC x 4-1/2", plated | | | 12 | 131-4 | LOCK NUT,5/16"-18, GB | NUT - hex, self-locking, 5/16" - 18 NC | | | 13 | D42833 | CLAMP | - hose, at swing tower | | | 14 | 113-257 | BOLT,Hex, 3/8" - 16 x 2-1/2", Gr 5 | For extendable dipper hose Hex, 3/8"-16 x 2 1/2", G5 | | | | clamp and spacer, see Figure 266 Refs. 13 and 14 | | | | 15 | 195-525 | WASHER,3/8", SAE | - flat, 3/8", plated | | | 16 | R46103 | SPACER | - clamp, see Figure 266 for second spacer Ref. 14 | | | 17 | 131-52 | NUT,3/8"-16, GC | NUT - hex, self-locking, 3/8" - 16 NC, plated | | | 18 | D40236 | CLAMP | - tube, at boom | | | 19 | 113-208 | BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 5 | | | | 20 | 113-206 | BOLT,Hex, 3/8" - 16 x 3/4", Gr 5, Full Thd | | | | 21 | 192-21 | LOCK WASHER,3/8" | WASHER, LOCK, 3/8" | | | 22 | D36040 | BUSHING | SPACER - tube clamp, side of boom | | | 23 | D99137 | HYD TUBE,19.05 mm OD | TUBE - right-hand, uses tubes with welded 90 degree fittings | | | 24 | D99139 | HYD TUBE,19.05 mm OD x 1711.5, 240.9 mm L | TUBE - left-hand, uses tubes with welded 90 degree fittings | | | 25 | D74182 | GROMMET,3/4" ID x 1.46" L | INSULATOR - tube clamp | | | 26 | D74192 | CLAMP | - tube | | | 27 | 113-207 | BOLT,Hex, 3/8" - 16 x 1", Gr 5 | | | | 28 | 195-525 | WASHER,3/8", SAE | - flat, 3/8", plated | | | 29 | 131-52 | NUT,3/8"-16, GC | NUT - hex, self-locking, 3/8" - 16 NC, plated | | | 30 | D34298 | HOSE | - 56" (1422 mm) long, to bucket cylinder | | | 31 | 218-5123 | ELBOW,90 Degree Elbow, 1-1/16" - 12 Male JIC x 7/8" - 14 Male ORB | - 90 degree, adjustable, Includes: Ref. 32 | | | 32 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk, Elbow | | | 33 | D99206 | HYD TUBE,19.05 mm OD x 738, 95.8 mm L | TUBE - to rod end of bucket cylinder | | | 34 | D38648 | BLOCK | SPACER - tube clamp | | | 35 | 214-267 | HOSE CLAMP,#64, 3.56" - 4.5", Type F Worm | CLAMP - tube | | | 36 | 218-5065 | HYD CONNECTOR,1-1/16" - 12 Male JIC x 7/8" - 14 Male ORB | ADAPTER - straight, male, Includes: Ref. 37 | | | 37 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | 10-1, 90 Duro, .755" ID x .097" Thk, Adapter | | | 38 | G103503 | CYLINDER BLOCK | CYLINDER - bucket, parts list Figure 380 | | | 39 | 218-1703 | REDUCER,37 Degree, 7/8"-14, Fem x 1 1/16"-12 Male | - tube, adapts new hoses and tubes for bucket cylinder Refs. 30, 31, 33, and 36, Figure 264, if used | |
|
|