| № | Номер | Название | Опции | Альт |
|---|
| A56467 | AXLE ASSEMBLY - rear steering, complete, Order L15395, Includes: Ref. 1 - 61, Serial Range: -9807352 | | |
| L15395 | STEERING AXLE | AXLE ASSEMBLY - rear steering, complete, Replaces A56467, Includes: Ref. 1 - 61, Start Serial: 9807352 | |
| A15748 | | HOUSING ASSEMBLY - rear axle, Includes: Ref. 1 - 5 | |
| 1 | L30673 | STUD | - differential carrier to housing (3" long) Replaces A13130 | |
| 2 | A13130 | STUD | - differential carrier to housing (2-5/8" long) Replaces A13131 | |
| 2a | A13130 | STUD | - carrier to housing (2-5/8" long) Used with 131-183 | |
| 2b | A13131 | STUD | - carrier to housing (2" long) Used with 131-183 | |
| 3 | A16374 | STUD | -, Serial Range: trunnion-housing | |
| 4 | NSS | NOT SOLD SEPARAT | HOUSING - rear axle | |
| 5 | 221-27 | DRAIN PLUG,Sq Soc, 1 1/4"-11 1/2, NTPF | PLUG - pipe, square socket head (1-1/4" NPT) | |
| 5a | 131-59 | LOCK NUT,3/4"-16 | NUT - hex., lock (3/4" - 16 NF), use 131-225 nut, 131-59 nut will not work | |
| 6 | A12928 | BREATHER | - oil, axle housing | |
| 7 | A12942 | GASKET | - differential carrier to axle housing | |
| 8 | 131-74 | LOCK NUT,1/2"-20 | NUT - hex., lock (1/2" - 20 NF) Used with L30673 and A13130 | |
| 9 | L30674 | WASHER | - carrier to housing stud (Used with L30673 and A13130) | |
| 9a | 131-183 | LOCK NUT,1/2"-20, GC | NUT - hex., lock (1/2" - 20 NF) Used with A13130 and A13131 | |
| A15744 | | FLANGE AND COMPANION ASSEMBLY - steering, L.H., Includes: Ref. 10 - 17 | |
| 10 | A12993 | BUSHING | - tie rod yoke bolt | |
| 11 | A13120 | STUD | - steering, Serial Range: knuckle-flange | |
| 12 | A15043 | SHIM | - stop screw spacer | |
| 13 | A55764 | | SPACER - steering stop screw | |
| 14 | A15735 | | STUD - steering arm | |
| 15 | NSS | NOT SOLD SEPARAT | FLANGE AND COMPANION - steering, L.H. | |
| 16 | 113-309 | | HHCS - 7/16" - 18 NC x 1-3/8" (Not illustrated) | |
| 17 | 221-41 | PLUG | - pipe, slotted headless (1/8" NPT) | |
| A15745 | FLANGE | AND COMPANION ASSEMBLY - steering, R.H., Includes: Ref. 18 - 24 | |
| 18 | A12993 | BUSHING | - tie rod yoke bolt | |
| 19 | A13120 | STUD | - steering, Serial Range: knuckle-flange | |
| 20 | A15043 | SHIM | - stop screw spacer | |
| 21 | A55764 | | SPACER - steering stop screw | |
| 22 | NSS | NOT SOLD SEPARAT | FLANGE AND COMPANION - steering, R.H. | |
| 23 | 113-309 | | HHCS - 7/16" - 14 NC x 1-3/8" (Not illustrated) | |
| 24 | 221-41 | PLUG | - pipe, slotted headless (1/8" NPT) | |
| 25 | 114-311 | BOLT | HHCS - 7/16" - 20 NF x 3" | |
| 26 | 114-312 | X | HHCS - 7/16" - 20 NF x 1-1/2" | |
| 27 | 92-7 | LOCK WASHER,7/16" | | |
| 28 | 129-530 | NUT,7/16"-20, G8 | | |
| 29 | A15741 | SEAL | - grease, trunnion socket | |
| 30 | A15742 | RETAINER | - grease seal | |
| 31 | A15743 | RING | SNAP RING - seal retainer | |
| 32 | A15746 | WASHER | - guide, axle shaft | |
| 33 | A13007 | SHAFT HOUSING | SHAFT - axle drive, rear | |
| 34 | A15078 | | SCREW - stop | |
| 35 | A12994 | OIL SEAL | - oil, axle shaft | |
| 36 | A12995 | O-RING,2 7" ID x 1/3" OD x 1/8" | SEAL - "O" ring, trunnion to housing | |
| 37 | A15385 | SPARE PART | SOCKET - trunnion | |
| A13274 | SHAFT | AND JOINT ASSEMBLY - universal, Includes: Ref. 38 - 42 | |
| 38 | A13117 | RING, SNAP | SNAP RING - axle shaft | |
| 39 | A13013 | | CAGE - ball | |
| 40 | A12982 | BALL | - joint | |
| 41 | A13011 | RACE | - inner | |
| 42 | A12981 | SHAFT | - universal | |
| 43 | A40214 | | ARM - steering | |
| | The ball including the nut is A18974. | | |
| 44 | 113-404 | CAPSCREW | HHCS - 1/2" - 13 NC x 1-1/2" | |
| 45 | 92-8 | LOCK WASHER,1/2" | | |
| 46 | 131-187 | LOCK NUT,7/8"-14, GB | NUT - hex., lock (7/8" - 14 NF), on later units use 131-760 | |
| 47 | A15737 | SHIM | - steering arm (.005") | |
| 47 | A15738 | SHIM | - steering arm (.010") | |
| 47 | A15739 | SHIM | - steering arm (.030") | |
| 48 | A13021 | | CAP - steering bearing, upper (R.H.) | |
| 48a | A50096 | VALVE | - relief, steering cap and arm | |
| 49 | 113-404 | CAPSCREW | HHCS - 1/2" - 13 NC x 1-1/2" | |
| 50 | 92-8 | LOCK WASHER,1/2" | | |
| 51 | A12990 | SHIM,.005" Thk | Bearing cap .005" Thk | |
| 51 | A12992 | SHIM,.010" Thk | Bearing cap .010" Thk | |
| 51 | A12991 | SHIM,.030" Thk | Bearing cap .030" Thk | |
| 52 | A13019 | CUP ASSY. | CUP - steering bearing | |
| 53 | A13018 | ROLLER BEARING,1.125" ID x 0.955" | CONE - steering bearing | |
| 54 | A13020 | CAP | - steering bearing, lower | |
| 55 | 113-404 | CAPSCREW | HHCS - 1/2" - 13 NC x 1-1/2" | |
| 56 | 92-8 | LOCK WASHER,1/2" | | |
| A12984 | SPINDLE | ASSEMBLY - wheel hub, Includes: Ref. 57 - 59, Serial Range: -8208309 | |
| A55765 | SPINDLE | ASSEMBLY - wheel hub, Includes: Ref. 57 - 59, Start Serial: 8208309 | |
| 57 | NSS | NOT SOLD SEPARAT | SPINDLE - wheel hub | |
| 58 | A13016 | BUSHING | - spindle | |
| 59 | A15820 | OIL SEAL | SEAL - oil, spindle | |
| 60 | A13136 | RING | WASHER - spindle nut | |
| 61 | 131-182 | LOCK NUT,7/16"-20, GC | NUT - hex., lock (7/16" - 20 NF), on later units use 131-753 | |
| 62 | 116-706 | SCREW | HHCS - 3/4" - 16 NF x 7/12" (Grade 8) | |
| 63 | 131-186 | LOCK NUT,3/4"-16, GB | NUT - hex., lock (3/4" - 16 NF) | |
| 74 | A15027 | RETAINER | not required | |
