| № | Номер | Название | Опции | Альт |
|---|
| G110186 | CYLINDER | - steering, 2-1/2 inch (64 mm) ID x 18-5/16 inch (465 mm) stroke, right-hand | |
| G110187 | CYLINDER | - steering, 2-1/2 inch (64 mm) ID x 18-5/16 inch (465 mm) stroke, left-hand | |
| 1 | G110188 | TUBE | - cylinder body, used with G110186 cylinder | |
| 2 | G110189 | TUBE | - cylinder body, used with G110187 cylinder | |
| 3 | G109152 | SPHERICAL BEARING,34.92mm ID x 55.56mm OD x 30.15mm W | - self-aligning | |
| 4 | L12571 | SNAP RING,#218, 2.321", Int, Spiral | RING - snap, retaining | |
| G104008 | GLAND | ASSEMBLY - cylinder | |
| 5 | NSS | NOT SOLD SEPARAT | GLAND - cylinder | |
| 6 | D95142 | WIPER SEAL,1.5" ID x 2" OD x 0.31" Thk | WIPER - piston rod, outer | |
| | Part of seal kit P/N G109458. | | |
| 7 | G107921 | SEAL,38.07mm ID x 50.93mm OD x 10.69mm Thk | - U-cup, piston rod, wide, with O-ring | |
| | Part of seal kit P/N G109458. | | |
| 8 | G109093 | SEAL,37.72mm ID x 50.98mm OD x 3.05mm Thk | - piston rod, narrow | |
| | Part of seal kit P/N G109458. | | |
| 9 | A28318 | O-RING,0.139" Thk x 2.484" ID, -230, Cl 5, 75 Duro | - gland | |
| | Part of seal kit P/N G109458. | | |
| 10 | G32129 | BACK-UP RING,63.25mm ID x 69.35mm OD x 1.4mm Thk | - backup, gland O-ring | |
| | Part of seal kit P/N G109458. | | |
| 11 | 187-1524 | SELF-TAP SCREW,Hex Hd, #8 x 3/8" | SCREW - self-tapping, hex head, slotted, No. 8 x 3/8 inch | |
| 12 | G107466 | ROD ASSY. | ROD ASSEMBLY - piston, 1-1/2 inch (38 mm) diameter | |
| 13 | G109152 | SPHERICAL BEARING,34.92mm ID x 55.56mm OD x 30.15mm W | - self-aligning | |
| 14 | L12571 | SNAP RING,#218, 2.321", Int, Spiral | RING - snap, bushing retaining | |
| 15 | G104100 | PISTON | - one piece | |
| 16 | F62076 | O-RING,0.139" Thk x 1.984" ID, -226, Cl 5, 75 Duro | RING - piston | |
| | Part of seal kit P/N G109458. | | |
| 17 | G33140 | RING,59.68mm ID x 64.26mm OD x 3.94mm Thk | SEAL - piston | |
| | Part of seal kit P/N G109458. | | |
| 18 | 28-1232 | BOLT,Hex, 3/4" - 16 x 2", Gr 8 | | |
| 19 | G32317 | WASHER,33.34mm ID x 63.5mm OD x 2.38mm Thk | - special, hardened | |
| 20 | 219-36 | LUBE NIPPLE,45 Degree Elbow, 1/8" - 27 NPTF | FITTING - grease, 45 degree, 1/8 PT x 55/64 inch long | |
| G109458 | GASKET KIT | KIT - seal, Includes: Ref. 6 - 10, 16, 17 and additional wear rings not used in these cylinders | |
