(05-164) - STEERING CONTROL VALVE

№	Номер	Название	Опции
	D135338	PUMP, HYDRAULIC	VALVE ASSEMBLY control, may receive either Eaton or Danfoss complete control valve assembly, see below for service of internal parts, Includes: Eaton control valve assembly and Ref. 1 thru 33 or Danfoss control valve assembly and Ref. 34 thru 59
	NSS	NOT SOLD SEPARAT	VALVE ASSEMBLY control, steering, Eaton No. 263-1061-004, if used, Replaces: Eaton No. 263-1061-001 valve, Includes: Ref. 1 thru 33
1	NSS	NOT SOLD SEPARAT	HOUSING control valve
2	NSS	NOT SOLD SEPARAT	SLEEVE control valve
3	NSS	NOT SOLD SEPARAT	SPOOL control valve
	N14250	KIT	centering spring, Includes: Ref. 4 and 5
4	NSS	NOT SOLD SEPARAT	SPRING centering
5	NSS	NOT SOLD SEPARAT	SPACER spring, if used, not shown
6	L30888	PIN	centering
7	NSS	NOT SOLD SEPARAT	VALVE check, control valve, not shown
8	211-204	BALL	3/16", anticavitation
9	N14764	PLUG	RETAINER spring, anticavitation
10	N14763	SPRING	anticavitation
11	H189555	BOLT,M6 x 20mm, Cl 8.8	Ferry head, 5/16"-24 NF x 1-5/8"
12	D82809	COVER	end
13	K964246	SPACER	drive shaft
	N14154	ROTOR	SET gerotor, control valve, Includes: Ref. 14 and 15
14	NSS	NOT SOLD SEPARAT	ROTOR control valve
15	NSS	NOT SOLD SEPARAT	STATOR control valve
16	L30878	DRIVE SHAFT	SHAFT drive, steering control valve
17	S113037	PLATE	spacer
18	N6392	O-RING,0.07" Thk x 2.864" ID, -40, Cl 5, 75 Duro	cover and housing
19	L35368	RETAINER	ball
20	211-208	BALL,5/16" Dia	check, steel
21	L30893	O-RING,1/16" Thk x 5/16" ID	seat, inner
22	D82806	VALVE SEAT	SEAT check ball
23	N8539	O-RING,0.07" Thk x 0.364" ID, -12, Cl 5, 75 Duro	seat, outer
24	D82805	SET SCREW	special, hex socket head
25	G13609	THRUST BEARING,25.4mm ID x 39.67mm OD x 1.98mm W	BEARING, THRUST - Needle, Spool
26	D82804	RACE	WASHER thrust, bearing
27	N13312	CYLINDER END CAP	RETAINER spool seal
28	A14515	O-RING,0.139" Thk x 1.859" ID, -225, Cl 5, 75 Duro	seal retainer
29	N13313	SEAL,25.1mm ID x 26.7mm OD x 2.6mm Thk	spool, inner
30	N13314	RING	backup, seal
31	L15402	O-RING,0.103" Thk x 1.049" ID, -121, Cl 5, 75 Duro	spool, inner
32	A28211	OIL SEAL	spool, outer
33	S110169	WASHER	RING retaining, seal retainer
	NSS	NOT SOLD SEPARAT	VALVE ASSEMBLY control, steering, Danfoss Type No. OSPC125LS, Code No. 150-0122, if used, Includes: Ref. 34 thru 59
34	NSS	NOT SOLD SEPARAT	HOUSING control valve
35	NSS	NOT SOLD SEPARAT	SLEEVE control valve
36	NSS	NOT SOLD SEPARAT	SPOOL control valve
37	N14219	SET OF PARTS	SPRING centering, set of six
38	3112269R1	PIN	centering
39	814-8040	BOLT,Hex, M8 x 1.25 x 40mm, Cl 8.8
40	3112273R1	COVER	end
	N14221	ROTOR	SET gerotor, control valve, Includes: Ref. 41 and 42
41	NSS	NOT SOLD SEPARAT	ROTOR control valve
42	NSS	NOT SOLD SEPARAT	STATOR control valve
43	538915R1	DRIVE SHAFT	SHAFT drive, steering control valve
44	3112276R1	PLATE	spacer
45	V35605	O-RING	O-RING cover and housing
46	N14220	SPACER	shaft
47	V35603	O-RING,1.5mm Thk x 80.5mm ID	O-RING plate
48	538920R1	WASHER	end cover
49	3112271R1	PIN, ROLL	PIN roll, locating, used with Ref. 50 bolt
50	K964166	BOLT,M10 x 1.25 x 35mm, Cl 8.8	special, no longer available, order P/N D145254 bolt with pin
50a	D145254	BOLT special, with pin	SCREW
51	3112270R1	BALL	plate
52	3112272R1	BUSHING	plate
53	V35600	SEAL	spool, outer
54	3112264R1	RING	retaining
55	N14217	SEAL	spool, inner, no longer available, order P/N D145253 O-ring
55a	D145253	O-RING	special
56	N14218	BEARING ASSY	BEARING spool, includes roller bearing and two thrust washers
57	N14222	BALL	housing
58	N14223	PLUG	PIN with bushing and spring, housing, no longer available, order P/N D145278 pin with bushing
59	D145278	PIN, SPLIT (COTTER)	PIN with bushing