(234) - EQUIPMENT HYDRAULIC SYSTEM - MODELS WITH LOADER, RESERVOIR TO LOADER CONTROL VALVE

№	Номер	Название	Опции
1	D94386	DIPSTICK	- reservoir
2	D93753	PADLOCK	- includes keys, if used, Includes: Ref. 3 and 4
3	R29555	KEY	- for Master padlock only
4	D93751	SET OF 2 KEYS	KEY - for Yale padlock only
5	D94060	VALVE	RELIEF VALVE - air outlet
6	R15538	VALVE	RELIEF VALVE - air inlet
7	D63506	ADAPTER	- relief valve
8	D63543	BREATHER	FILTER - relief valve
9	D123893	PLUG	DRAIN PLUG - reservoir, hex head, 3/4" NPT
10	R13911	HOSE,31.80 mm ID x 101.60 mm ID, SAE 100R3	- suction 31.80 mm ID x 101.60 mm ID, SAE 100R3
11	214-257	HOSE CLAMP,#24, 1.06" - 2", Type F Worm
12	D86037	HYD TUBE	TUBE - suction
13	D67298	INSULATOR	- tube clamp
14	D68845	MOUNTING CLIP	CLAMP - suction tube
15	113-208	BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 5
16	217-178	FITTING,1-1/4" Hose Barb x 1-5/8" - 12 Male ORB	STEM FITTING - straight, hose to pump, Incl. Ref. 17
17	218-5011	O-RING,0.118" Thk x 1.475" ID, -920, Cl 6, 90 Duro	- fitting
18	D73079	PUMP	HYDRAULIC PUMP - equipment, parts list Figure 292
		See notes in either the CE group book or the Tech analyst book for instructions on options for this unit to replace the hydraulic pump.
19	113-410	BOLT,Hex, 1/2" - 13 x 1-1/2", Gr 5, Full Thd
20	192-23	LOCK WASHER,1/2"	WASHER, LOCK, 1/2"
21	D90883	SPLINED COUPLING	COUPLING - hydraulic pump, Includes: Ref. 22 and 23
22	A45216	BUSHING	- coupling
23	86636814	LUBE NIPPLE,1/4"-28 x .52" lg	GREASE FITTING - straight, 1/4"-28 NF
24	13-728	BOLT,Hex, 7/16" - 14 x 1-3/4", Gr 5
25	192-22	LOCK WASHER,7/16"	WASHER, LOCK, 7/16"
26	A30013	WASHER,11.51mm ID x 19.05mm OD x 1.59mm Thk	- flat, special
27	218-5069	HYD CONNECTOR,1-5/16" - 12 Male JIC x 1-5/16" - 12 Male ORB	Adapter - straight, male, Incl. Ref. 28
28	218-5010	O-RING,0.116" Thk x 1.171" ID, -916, Cl 6, 90 Duro	- adapter
29	D68547	HOSE,19.05mm ID x 200mm L, SAE 100R2	- 20" (508 mm) long, pump pressure
30	D70411	HYD TUBE,1" OD	TUBE - pressure, from hydraulic pump, models with PTO, see Figure 278
31	218-739	UNION,1 5/16"-12, 37 Degree x 1 5/16"-12, 37 Degree	CONNECTOR - straight, tube
32	D73061	TUBE	- pressure, to loader control valve, models with PTO see Figure 278
33	D67297	BLOCK	INSULATOR - tube clamp
34	D68846	CLAMP	- tube
35	113-207	BOLT,Hex, 3/8" - 16 x 1", Gr 5
36	113-206	BOLT,Hex, 3/8" - 16 x 3/4", Gr 5, Full Thd
37	192-21	LOCK WASHER,3/8"	WASHER, LOCK, 3/8"
38	195-525	WASHER,3/8", SAE	- flat, 3/8", plated
39	129-103	NUT,Hex, 3/8" - 16, Gr 5	NUT, 3/8"-16, G5
40	218-589	TEE,37 Degree, 1 1/16"-12 x 1 5/16"-12, Run	- male
41	218-335	CAP,37 Degree, 1 1/16"-12	- hex, 1-1/16" - 12, tee
42	D74750	HOSE	- 18" (457 mm) long, to Gresen control valve
42a	D73319	HOSE	- 14" (356 mm) long, to Parker control valve, replaces 16" (406 mm) long hose used on some models, if used, Includes: Ref. 42B
42b	218-5008	O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro	- D73319 hose, at control valve port
43	218-5115	ELBOW,90 Degree Elbow, 1-5/16" - 12 Male JIC x 1-3/16" - 12 Male ORB	- 90 degree, used with Gresen control valve only, Includes: Ref. 44
44	218-5009	O-RING,0.116" Thk x 1.048" ID, -914, Cl 6, 90 Duro	- elbow
45	REF	INSTRUCTION	CONTROL VALVE - loader, for correct assembly and components, see page 295, 297, or 307
46	218-5064	HYD CONNECTOR,1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB	ADAPTER - straight, male, to Parker or Case control valve inlet, Incl. Ref. 47
47	218-5008	O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro	- adapter
48	D123388	TUBE ASSY.	TUBE - to Parker control valve inlet, if used
49	D127090	TUBE ASSY.	TUBE - to Case control valve inlet