| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | VALVE ASSEMBLY control, loader, for correct assembly and components, see Figure 08-354 or 08-356 | | | 2 | 218-5059 | HYD CONNECTOR,3/4"-16, 37 Degree x 3/4"-16, O-Ring | CONNECTOR straight, male, Incl. Ref 3 | | | 3 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk, Connector | | | 4 | D140106 | HOSE | 23-5/8" (600 mm) long, steering pressure, loader control valve to steering control valve lower right-hand port, replaces 19-11/16" hose used on some models, used with Ref. 5 connector, if used, may be replaced by Ref. 4A hose on some models | | | 4a | D143189 | HOSE | 24-5/8" (625 mm) long, steering pressure, loader control valve to steering control valve lower right-hand port, does not require Ref. 5 connector at steering valve, Includes: Ref. 4B | | | 4b | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk, Hose | | | 5 | 218-5059 | HYD CONNECTOR,3/4"-16, 37 Degree x 3/4"-16, O-Ring | CONNECTOR straight, male, Incl. Ref 6 | | | 6 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk, Connector | | | 7 | REF | INSTRUCTION | VALVE ASSEMBLY control, steering, see Figure 05-164 | | | 8 | 218-5053 | HYD CONNECTOR,7/16" - 20 JIC x 7/16" - 20 ORB | ADAPTER straight, male, Incl. Ref. 9 | | | 9 | 237-6004 | O-RING,0.072" Thk x 0.351" ID, -904, Cl 6, 90 Duro | 4-1, 90 Duro, .351" ID x .072" Thk, Adapter | | | 10 | D135246 | HOSE | 25-5/8" (650 mm) long, steering pilot, steering control valve small center port to loader control valve | | | 11 | 218-5057 | HYD CONNECTOR,9/16" - 18 JIC x 9/16" - 18 ORB | CONNECTOR straight, male, Incl. Ref. 12 | | | 12 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk, Connector | | | 13 | R34076 | HOSE | 21-1/2" (546 mm) long, steering control valve upper and lower left-hand ports to tubes, used with Ref. 5 connector, if used, may be replaced by Ref. 13A hose on some models | | | 13a | D143188 | HOSE ASSY. | HOSE, 22-7/16" (570 mm) long, steering control valve upper and lower left-hand ports to tubes, does not require Ref. 5 connector at steering valve, Includes: Ref. 13B | | | 13b | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk, Hose | | | 14 | D143207 | TUBE | lower, to steering cylinder right-hand port hose | | | | Tube lines are a different configuration than those shown in parts book 8-6952. There are no serial breaks, so be sure the parts being ordered, are similar looking to the ones required. | | | | 15 | D143205 | TUBE | upper, to steering cylinder left-hand port hose | | | | Tube lines are a different configuration than those shown in parts book 8-6952. There are no serial breaks, so be sure the parts being ordered, are similar looking to the ones required. | | | | 16 | D120679 | CLAMP,Tube, 1/2" | tube | | | 17 | 113-209 | BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 5 | | | | 18 | 192-21 | LOCK WASHER,3/8" | WASHER, LOCK, 3/8" | | | 19 | 195-525 | WASHER,3/8", SAE | flat, 3/8", plated | | | 20 | 25-226 | SQUARE NUT,Sq, 3/8"-16 | square, 3/8"-16 NC | | | 21 | D124648 | HOSE | 19-11/16" (500 mm) long, at steering cylinder | | | 22 | 218-5136 | ELBOW,45 Degree Elbow, 3/4" - 16 Male JIC x 3/4" - 16 Male ORB | 45 degree, adjustable, Incl. Ref 23 | | | 23 | 237-6008 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk, Elbow | | | 24 | REF | INSTRUCTION | CYLINDER ASSEMBLY steering, see Figure 05-168 | | | 25 | D133857 | HOSE | 24-5/8" (625 mm) long, steering return, steering control valve upper right-hand port to hydraulic oil filter | | | 26 | 218-5057 | HYD CONNECTOR,9/16" - 18 JIC x 9/16" - 18 ORB | CONNECTOR straight, male, Incl. Ref. 27 | | | 27 | 237-6006 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | 6-1, 90 Duro, .468" ID x .078" Thk, Connector | |
|
|