| № | Номер | Название | Опции | Альт |
|---|
| 1 | H672904 | VALVE | ASSEMBLY, priority flow divider, parts list Fig.5-40 | | | 2 | 218-5065 | HYD CONNECTOR,1-1/16" - 12 Male JIC x 7/8" - 14 Male ORB | Straight, O-Ring boss, Includes: Ref. 3 | | | 3 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | | | | 4 | 218-5231 | ELBOW,90 Degree, 1 1/16"-12, 37 Degree x 1 1/16"-12, 37 Degree Fem Sw | | | | 5 | H377754 | HOSE,0.75" ID x 23.62", SAE 100R2, SAE 100R3 | Priority Valve to Backhoe Supply Tube | | | 6 | 218-596 | TEE,1 1/16"-12 37 Degree | TEE, 1-1/16-12 inch flare branch x flare x flare | | | 7 | 218-335 | CAP,37 Degree, 1 1/16"-12 | Hex | | | 8 | H672492 | TUBE,19.05 mm OD x 1700, 90 mm L | backhoe supply line | | | 9 | H434096 | BRACKET | tube support | | | 10 | H435758 | SUPPORT | tube | | | 11 | 515-23190 | CLAMP,3/4", Insul, 3/8" Bolt | P-type | | | 12 | 413-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5 | | | | 13 | 496-21041 | WASHER,13/32" x 13/16" x .089", HDN | | | | 14 | 230-4216 | LOCK NUT,3/8"-16, GA | | | | 15 | 413-516 | BOLT,Hex, 5/16" - 18 x 1", Gr 5 | | | | 16 | H426775 | WASHER | flat, special, hardened | | | 17 | H346650 | NUT | U-type, 5/16 inch NC | | | 18 | 218-1256 | BHD LOCK NUT,Blkhd, 1 1/16"-12 | | | | | See Fig. 8-40 for backhoe supply and return lines from bulkhead nuts (Ref.18) out | | | | 19 | 95-81125 | WASHER,1 1/16" x 1 3/4" x .065" | flat, 1-1/16 x 1-3/4 x 1/16 inch | | | 20 | 218-696 | ELBOW,90 Degree Blkhd, 1 1/16"-12, 37 Degree x 1 1/16"-12, 37 Degree | | | | 20a | H672486 | TUBE,19.05 mm OD x 146, 71 mm L | return, backhoe | | | 21 | H673212 | FITTING | special | | | 21a | H317313 | HOSE ASSY. | 28 inch (711 mm) long, cut from H379214 bulk hose, backhoe return line, see below | | | | See Fig. 8-40 for backhoe supply and return lines from bulkhead nuts (Ref.18) out | | | | 21b | 214-1412 | HOSE CLAMP,#12, 0.69" - 1.25", Type F Worm | | | | 22 | H672487 | TUBE,19.05 mm OD x 80, 80 mm L | backhoe return line | | | | See Fig. 8-40 for backhoe supply and return lines from bulkhead nuts (Ref.18) out | | | | 23 | H672308 | TUBE,25.4 mm OD x 150, 106 mm L | hose to filter, front drain manifold | | | 24 | A57185 | HOSE | 4-3/4 inch (121 mm) long, cut from D55911 bulk hose, backhoe return line, see below | | | | See Fig. 8-40 for backhoe supply and return lines from bulkhead nuts (Ref.18) out | | | | 25 | H436938 | HOSE | 15-3/4 inch (400 mm) long, cut from S118400X bulk hose, priority valve return, see below | | | H379214 | HYDRAULIC HOSE,19.00 mm ID x 5588.00 mm Bulk, SAE 30R2 | Use to make Refs. 21A and 24 | | | S118400X | LARGE HOSE,9.53mm ID x 7620mm L, SAE 30R2 | HOSE,LARGE bulk, 3/8 (10) x 5/8 (15) x 300 inch (7620 mm) long, use to make Ref. 25 | | | 26 | 217-385 | FITTING | straight, 3/8 stem end x 7/16-20 inch adj. O-ring boss, Includes: Ref. 27 | | | 27 | 237-6004 | O-RING,0.072" Thk x 0.351" ID, -904, Cl 6, 90 Duro | | | | 28 | 214-1408 | HOSE CLAMP,11.2mm - 19.8mm | Adj. | | | 29 | S120052 | HOSE, 2 inch (51 mm) long, cut from S118400X bulk hose, see below | | | | 30 | H44586 | AXLE PIN | clevis, special, used as plug in this application | | | 31 | H672485 | TUBE,19.05 mm OD | manifold, rear steering valve drain | | | 32 | 218-1256 | BHD LOCK NUT,Blkhd, 1 1/16"-12 | | | | 32a | H434618 | ANGLE | BRACKET tube support | | | 33 | 218-676 | FITTING,Blkhd, 1 1/16"-12, 37 Degree x 1 1/16"-12, 37 Degree | ADAPTER straight, 1-1/16-12 inch flare x bulkhead flare | | | 34 | 218-335 | CAP,37 Degree, 1 1/16"-12 | Hex | | | 35 | 218-5221 | TEE,37 Degree, 1 1/16"-12 x 1 1/16"-12, Fem Sw Run | | | | 36 | H434986 | HOSE ASSY. | 25-1/4 inch (1150mm) long, priority flow divider valve to bulkhead plate | | | 37 | H233304 | CLAMP | hose | | | 38 | 413-536 | BOLT,Hex, 5/16" - 18 x 2-1/4", Gr 5 | | | | 39 | 230-4215 | NUT,5/16"-18, GA | | | | 40 | 214-1412 | HOSE CLAMP,#12, 0.69" - 1.25", Type F Worm | | | | 41 | H269449 | PLUG | hose | | | 42 | 218-5231 | ELBOW,90 Degree, 1 1/16"-12, 37 Degree x 1 1/16"-12, 37 Degree Fem Sw | | | | 43 | 218-5062 | HYD CONNECTOR,7/8"-14, 37 Degree x 7/8"-14, O-Ring | straight, 7/8-14 inch flare x O-ring boss, Includes: Ref. 44 | | | 44 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | | | | 45 | 218-5232 | ELBOW,90 Degree, 7/8"-14, 37 Degree x 7/8"-14, 37 Degree Fem Sw | | | | 46 | H434985 | HOSE | 41-5/16 inch (1050 mm) long, power beyond, attachment control valve to bulkhead plate | | | 47 | H317347 | HOSE | 46 inch (1168 mm) long, cut from H379214 bulk hose, return, bulkhead plate to tee at attachment control valve, see below | | | 48 | H431825 | FITTING | TEE, special, see Fig. 8-24, Ref.3 for continuation of circuit, Includes: Ref. 49 | | | 49 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | | | | S118400X | LARGE HOSE,9.53mm ID x 7620mm L, SAE 30R2 | HOSE,LARGE bulk, 3/8 (10) x 5/8 (15) x 300 inch (7620 mm) long, use to make Ref. 29 | | | H379214 | HYDRAULIC HOSE,19.00 mm ID x 5588.00 mm Bulk, SAE 30R2 | Use to make Ref. 47 | |
|
|