| № | Номер | Название | Опции | Альт |
|---|
| G100422 | TRANSMISSION | ASSEMBLY - before transmission SN 2863141, parts list Figures 156 - 188 | | | G103020 | | TRANSMISSION ASSEMBLY - transmission SN 2863141 and after, parts list Figures 156 - 188 | | | 1 | A51169 | HOUSING | - transmission, order G103460 housing, (2) G106157 pins, (2) S5871 O-rings, and (1) 221-12 pipe plug | | | 1 | A136583 | | HOUSING - transmission, order G130460 housing, (2) G106157 pins, (2) S5871 O-rings, and (1) 221-12 pipe plug | | | 1 | G102756 | HOUSING | - transmission, order G103460 housing, (2) G106157 pins, (2) S5871 O-rings, and (1) 221-12 pipe plug | | | 1 | G103460 | HOUSING | - transmission, when ordered as a replacement for any of the above, also order (2) G106157 pins, see Figure 170, (2) S5871 O-rings, and (1) 221-12 pipe plug | | | 2 | A50014 | PLUG | DRAIN PLUG - transmission housing | | | 3 | A58608 | GASKET | - nylon, no longer used, order G102141 copper washer | | | 3 | G102141 | SEALING WASHER | WASHER - copper, drain plug | | | | Part of seal kit P/N G101829. | | | | G100419 | SCRAPER | COVER ASSEMBLY - front, uses 217-177 barb fitting, see Figure 138, no longer used, order G104174 cover and 217-393 barb fitting, Includes: Ref. 4 - 11 | | | G104174 | COVER | ASSEMBLY - front, uses 217-393 barb fitting, see Figure 138, Includes: Ref. 4 - 11 | | | 4 | NSS | NOT SOLD SEPARAT | COVER - front | | | 5 | A50420 | SEAL | OIL SEAL - input shaft | | | | Part of seal kit P/N G101829. | | | | 6 | A50362 | STUD | - oil suction tube, no longer used, order Ref. 39 bolt | | | 7 | NSS | NOT SOLD SEPARAT | HOUSING - brake | | | 8 | S64319 | CALIPER | DOWEL - cover mounting | | | 9 | 166-70 | 12 PT SCREW,Flg, 7/16" - 14 x 2 1/4", Gr 8 | SCREW - Ferry head, 7/16" - 14 NC x 2-1/4" | | | 10 | A50689 | WASHER | - flat, hardened | | | 11 | A50596 | TUBE | - oil filler | | | 12 | G35210 | GASKET | - front cover | | | | Part of seal kit P/N G101829. | | | | 13 | A50600 | DIPSTICK | - transmission | | | 14 | A51515 | TUBE | - oil suction | | | 15 | A51732 | GASKET | - oil suction tube | | | | Part of seal kit P/N G101829. | | | | 16 | G102127 | STUD | - 1/2" - 13 NC x 3-3/8", if used | | | 16a | 26-840 | BOLT,Hex, 1/2" - 13 x 2-1/2", Gr 8 | - hex head, 1/2" - 13 NC x 2-1/2", grade 8, may be used in place of ref. 16 stud and ref. 22 nut, if used | | | 17 | 25-106 | NUT,3/8"-16, G5 | - hex, 3/8" - 16 NC, used with ref. 6 stud, if used | | | 18 | A136169 | COVER | - rear, no longer available, order G102759 cover | | | 18 | G102759 | COVER | - rear | | | 19 | G35211 | GASKET | - rear cover | | | | Part of seal kit P/N G101829. | | | | 20 | S64319 | CALIPER | DOWEL - cover mounting | | | 21 | G102110 | BOLT | - 1/2" - 13 NC x 1-7/8", if used | | | 21a | 26-820 | BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 8 | May be used in place of ref. 21 stud and ref. 22 nut, if used Hex, 1/2"-13 x 1 1/4", G8, Full Thd | | | 22 | 88871 | NUT,1/2"-13, GC | NUT, LOCK, , Used with Ref. 21 stud only, if used 1/2"-13, GC | | | 23 | G102240 | CAP | - rear, input shaft | | | 24 | G102757 | SHIM,.005" Thk | (0.127 mm) .005" Thk | | | | Part of seal kit P/N G101829. | | | | 24 | G102758 | SHIM,.007" Thk | (0.1778 mm) .007" Thk | | | | Part of seal kit P/N G101829. | | | | 25 | 13-628 | BOLT,Hex, 3/8" - 16 x 1-3/4", Gr 5 | | | | 26 | D32117 | COPPER WASHER | WASHER, COPPER | | | | Part of seal kit P/N G101829. | | | | 27 | A54107 | OIL SEAL,38.1mm ID x 8mm Thk | OIL SEAL - PTO shaft | | | | Part of seal kit P/N G101829. | | | | 28 | A28318 | O-RING,0.139" Thk x 2.484" ID, -230, Cl 5, 75 Duro | - cover, winch models only | | | 29 | G101696 | PROTECTIVE COVER | COVER - PTO shaft | | | 30 | A50672 | CAP | COVER - rear, clutch shafts | | | 31 | 72223 | BLOCK | SHIM - .002" (0.0508 mm) thick | | | | Part of seal kit P/N G101829. | | | | 31 | 1342255C1 | SHIM | - .007" (0.1778 mm) thick | | | | Part of seal kit P/N G101829. | | | | 32 | A50671 | CAP | COVER - front, clutch shafts | | | 33 | R11428 | GASKET | - front cover, clutch shafts | | | | Part of seal kit P/N G101829. | | | | 34 | 13-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5, Full Thd | | | | 35 | D32117 | COPPER WASHER | WASHER, COPPER | | | | Part of seal kit P/N G101829. | | | | 36 | 221-6 | X,Sq Hd, 1"-11 1/2 NPTF | PLUG - square head, 1" NPT, if used, used before transmission SN 2806173 | | | 37 | S5871 | O-RING,11.984" ID x 12.262" OD x 0.139" | - housing to final drive, used with G130460 housing | | | | Part of seal kit P/N G101829. | | | | 38 | 221-12 | PLUG,Sq Hd, 1/4"-18 | - square head, 1/4" NPT, may be used with G103460 housing only | | | | Part of seal kit P/N G101829. | | | | 39 | 26-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 8 | - hex head, 3/8" - 16 NC x 1", grade 8, replaces A50362 stud (ref. 6) and 25-106 nut (ref. 17) | | | G101829 | GASKET KIT | KIT - seal, Includes: Refs. 3 (P/N G102141), 5, 12, 15, 19, 24, 24, 26, 27, 31, 31, 33, 35, 37 and 38, for complete kit see Figure 190 | |
|
|