| № | Номер | Название | Опции | Альт |
|---|
| 1 | D44741 | | TOWER - backhoe swing, Includes: Ref. 2 and 3 | | | 2 | D30756 | BUSHING,51.02mm ID x 63.5mm OD x 31.8mm L | - tower at mounting frame | | | 3 | D33024 | BUSHING,51.02mm ID x 63.5mm OD x 25.4mm L | - tower at boom cylinder | | | 4 | D44733 | PIN | BOLT - mounting, swing tower | | | 5 | D44813 | SHIM,53.34mm ID x 76.2mm OD x 0.89mm Thk | | | | 6 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , pin #200, Ext | | | 7 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | | | 8 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , pin #200, Ext | | | 9 | 195-2155 | WASHER,2 1/16" x 3" x .109" | - flat, steel (2-1/16") | | | 10 | D33637 | PIN | - tower at mounting frame | | | 11 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | | | 12 | D44735 | AXLE PIN | PIN -, Serial Range: boom-tower | | | 13 | D45557 | SHIM | - boom to tower (.062 to .074" thick) | | | 14 | D41472 | WASHER | - flat, steel (2-1/4") | | | 15 | F40807 | SNAP RING,#225, Ext | Ring, Snap, , pin #225, Ext | | | 16 | D44693 | | BOOM - backhoe, Includes: Ref. 17 - 21 | | | 17 | D44688 | BUSHING | - boom, at tower | | | 18 | D44686 | SPACER | - bushing, at tower | | | 19 | D45325 | BUSHING | - boom, at dipper arm | | | 20 | D45311 | SPACER | - bushing, at dipper arm | | | 21 | D33024 | BUSHING,51.02mm ID x 63.5mm OD x 25.4mm L | - boom, at cylinder anchors | | | 22 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | | | 23 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | | | 24 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , pin #200, Ext | | | 25 | 195-2155 | WASHER,2 1/16" x 3" x .109" | - flat, steel (2-1/16") | | | 26 | D37607 | PIN | - boom cylinder mounting | | | 27 | REF | INSTRUCTION | CYLINDER - hydraulic, boom (5" I.D. x 39-1/16" stroke) See figure 58 for proper cylinder | | | 28 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , pin #200, Ext | | | 29 | 195-2155 | WASHER,2 1/16" x 3" x .109" | - flat, steel (2-1/16") | | | 30 | D37607 | PIN | - crowd cylinder mounting, at boom | | | 31 | D44734 | AXLE PIN | PIN - crowd cylinder mounting, at dipper arm | | | 32 | REF | INSTRUCTION | CYLINDER - hydraulic, crowd (4-1/2" I.D. x 40-1/8" stroke) See figure 58 for proper cylinder | | | 33 | D44649 | DIPPER | ARM - backhoe (When stock is exhausted, order L47603 dipper arm for service), Includes: Ref. 34 - 38 | | | 33 | L47603 | BOOM | DIPPER ARM - backhoe (Not shown) | | | 34 | D33024 | BUSHING,51.02mm ID x 63.5mm OD x 25.4mm L | - dipper arm, at crowd cylinder | | | 35 | D44697 | BUSHING | - dipper arm, at boom | | | 36 | D37392 | BUSHING,44.68mm ID x 53.98mm OD x 31.75mm L | - dipper arm, at bucket cylinder | | | 37 | D30741 | BUSHING,38.33mm ID x 47.63mm OD x 50.8mm L | - dipper arm, at bucket link | | | 38 | D37443 | BUSHING,44.68mm ID x 57.15mm OD x 50.8mm L | - dipper arm, at bucket | | | 39 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | | | 40 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , pin #200, Ext | | | 41 | 195-2155 | WASHER,2 1/16" x 3" x .109" | - flat, steel (2-1/16") | | | 42 | D44734 | AXLE PIN | PIN - boom to dipper arm | | | 43 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | | | 44 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, steel (1-13/16") | | | 45 | D44742 | | PIN - bucket cylinder to dipper arm | | | 46 | REF | INSTRUCTION | CYLINDER - hydraulic, bucket (4" I.D. x 27-1/4" stroke) See figure 58 for proper cylinder | | | 47 | D25279 | SNAP RING,M35, Int | RING - pin retaining | | | 48 | D28610 | WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk | - special | | | 49 | D37612 | PIN,38.1mm OD x 222.25mm L | - bucket link to bucket cylinder and dipper arm | | | 50 | D49015 | DRAG LINK | LINK - bucket cylinder to dipper arm R.H., Includes: Ref. 51 and 52 | | | 51 | D30933 | BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L | - link, at bucket cylinder | | | 52 | D32919 | BUSHING,38.4mm ID x 47.63mm OD x 19.05mm L | - link, at dipper arm | | | 53 | D49014 | POWER ARM | LINK - bucket cylinder to dipper arm, L.H., Includes: Ref. 54 and 55 | | | 54 | D30933 | BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L | - link, at bucket cylinder | | | 55 | D32919 | BUSHING,38.4mm ID x 47.63mm OD x 19.05mm L | - link, at dipper arm | | | 56 | D44730 | LINK | - bucket cylinder to bucket (Used with D41569 and D41570, bucket assemblies only), Includes: Ref. 57 | | | 56a | L52209 | DRAG LINK | LINK - bucket cylinder to bucket (Used with L51104 and L53132, high capacity bucket assemblies only), Includes: Ref. 57 | | | 57 | D30933 | BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L | - link | | | 58 | D25279 | SNAP RING,M35, Int | RING - pin retaining | | | 59 | D28610 | WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk | - special | | | 60 | D30899 | PIVOT PIN,38.1mm OD x 338.14mm L | PIN - bucket link to bucket (Used with D41569 and D41570, bucket assemblies only) | | | 60 | L51109 | AXLE PIN | PIN - bucket link to bucket (Used with L51104 and L53132, high capacity bucket assemblies only) | | | 60 | D37793 | PIN | - bucket link (Used with frost point installation only) | | | 61 | D37450 | SPACER,40.89mm ID x 48.26mm OD x 63.5mm L | SPACER - bucket link | | | 62 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | | | 63 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, steel (1-13/16") | | | 64 | D37613 | PIN | - dipper, Serial Range: arm-bucket | | | 65 | REF | INSTRUCTION | BUCKET - backhoe (See figure 14 for options) | | | D42577 | SPARE PART | FROST POINT ASSEMBLY - backhoe, Includes: Ref. 66 - 68 | | | 66 | NSS | NOT SOLD SEPARAT | SHANK - frost point | | | 67 | D43416 | POINT | - tooth | | | 68 | D43417 | PIN | FLEX PIN - point | |
|
|