(8-10) - BOOM CYLINDER HYDRAULIC CIRCUIT, MODELS WITH ONE BOOM MOUNTING PIN AT SWING TOWER

№	Номер	Название	Опции
1	REF	INSTRUCTION	VALVE ASSEMBLY - control, backhoe, parts list Figure 8-40, for mounting plate see Figure 8-2
2	413-832	BOLT,Hex, 1/2" - 13 x 2", Gr 5
3	80679	LOCK WASHER,1/20.507 CST ZND	WASHER, LOCK, 1/2"
4	95-21056	WASHER,1/2"	- flat, 9/16 x 1-3/8 x 1/8 inch
5	425-108	NUT,1/2" - 13, Gr 5	NUT, , Hex 1/2"-13, G5
6	218-5064	HYD CONNECTOR,1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB	ADAPTER - straight, 1-1/16-12 inch flare x O-ring boss, Incl. Ref. 7
7	237-6012	O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro	12-1, 90 Duro, .924 ID x .116" Thk
8	D93207	FITTING	RESTRICTOR - check, lower port
9	D88964	TUBE,0.75" OD	- lower port
10	D40236	CLAMP	- metal, boom tube to swing tube, replaces plastic tube clamps on some models
11		RESERVED
12		RESERVED
13	413-632	BOLT,Hex, 3/8" - 16 x 2", Gr 5
14	D76195	SPACER,10.31mm ID x 15.88mm OD x 17.78mm L	- used with metal tube clamps
15	495-21044	WASHER,3/8"	(flat, 7/16 x 1 x 5/64 inch) 3/8"
16	131-666	LOCK NUT,3/8"-16, GB	NUT - hex, self-locking, 3/8 inch NC
17	D88977	HOSE,15.88mm ID x 1300mm L, SAE 100R2	- 51-1/8 inch (1300 mm) long, lower port, to right-hand cylinder
18	D88978	HOSE,15.88mm ID x 1350mm L, SAE 100R2	- upper port, to left-hand cylinder
19	D93472	CLAMP	- hose, at swing tower
20	D93471	PLATE	- clamp
21	113-213	BOLT,Hex, 3/8" - 16 x 2-1/4", Gr 5
22	D41740	WASHER	- flat, special
23	131-52	NUT,3/8"-16, GC	NUT - light hex, self-locking, 3/8 inch NC
24	D69421	HYD TUBE,0.75" OD	TUBE - closed end of left-hand cylinder
25	218-5239	TEE,1-1/16" - 12 Male JIC x 1-1/16" - 12 Male JIC x 1-1/16" - 12 Male ORB	- 1-1/16-12 inch lare branch x flare x adj o-ring boss, Includes: Ref. 26
26	237-6012	O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro	12-1, 90 Duro, .924 ID x .116" Thk
27	D50732	HOSE,12.7mm ID x 652.78mm L, SAE 100R2	- 25-11/16 inch (653 mm) long, crossover, closed end circuit, Includes: Ref. 28
28	237-6012	O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro	12-1, 90 Duro, .924 ID x .116" Thk
29	D121777	TUBE	- hose to right-hand cylinder tee
30	D121779	TUBE	- tee at right-hand cylinder to crossover hose
31	S207953	TUBE,19.05 mm OD x 760 mm L	- to rod end of right-hand cylinder
32	218-596	TEE,1 1/16"-12 37 Degree	- 1-1/16-12 inch flare, right-hand cylinder tubes
33	D65886	HOSE,12.7mm ID x 457.2mm L, SAE 100R2	- 18 inch (457 mm) long crossover, rod end circuit
34	D69234	HYD TUBE,0.75" OD x 41.4, 2.75" L	TUBE - to rod end of left-hand cylinder
35	D40236	CLAMP	- metal, tube, if used
36	D124301	CLAMP,3/4" ID	- plastic, tube, used with Ref. 37, if used
37	D120614	CLAMP,25mm W x 68mm L x 9mm Thk	- plastic, tube if used
38	D76195	SPACER,10.31mm ID x 15.88mm OD x 17.78mm L	- used with metal tube clamp, if used
39	113-213	BOLT,Hex, 3/8" - 16 x 2-1/4", Gr 5
40	492-11038	LOCK WASHER,3/8"
41	425-106	NUT,3/8"-16, Cl 5
42	495-21044	WASHER,3/8"	(flat, 7/16 x 1 x 5/64 inch), Used with plastic tube clamp, if used 3/8"
43	218-5065	HYD CONNECTOR,1-1/16" - 12 Male JIC x 7/8" - 14 Male ORB	ADAPTER - straight, 1-1/16-12 fl x 7/8 -14 inch o-ring boss, Includes: Ref. 44
44	237-6010	O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro	10-1, 90 Duro, .755" ID x .097" Thk
45	214-267	HOSE CLAMP,#64, 3.56" - 4.5", Type F Worm	CLAMP - adj, 3 -9/16 - 4 -1/2 inch dia, cylinder tube
46	D38648	BLOCK	SPACER - clamp
47	G106168	CYLINDER,Double Acting, 44.45mm Rod, 1062.99mm Stroke	ASSEMBLY - boom, parts list Fig. 8-72
47	G106168R	REMAN-HYD CYLINDER	35C, 35C WL, Both BACKHOE, ASSEMBLY, boom
47	G106168C	CORE-HYD CYLINDER	Return Number
48	L18337	CABLE TIE,9.95"-12.1" lg	STRAP - tie, hoses