| № | Номер | Название | Опции | Альт |
|---|
| R46428 | CONVERTER | TORQUE CONVERTER ASSEMBLY - complete, used on all loader models; used on dozer and drawbar models before P.I.N. 3077110, Includes: Ref. 1 - 11 | |
| R52028 | CONVERTER | TORQUE CONVERTER ASSEMBLY - complete, used on dozer and drawbar models P.I.N. 3077110 and after, Includes: Ref. 1 - 11 | |
| N8975 | CONVERTER | CORE ASSEMBLY - torque converter, R46428 torque converter assembly only, Includes: Ref. 1 - 11 | |
| N13044 | CONVERTER | CORE ASSEMBLY - torque converter, R52028 torque converter assembly only, Includes: Ref. 1 - 11 | |
| 1 | NSS | NOT SOLD SEPARAT | ROTATING ASSEMBLY - R46428 torque converter only, painted yellow, stamped with N8975 core assembly part number visible through flywleel housing opening | |
| 1a | NSS | NOT SOLD SEPARAT | ROTATING ASSEMBLY - R52028 torque converter only, painted black, stamped with N13044 core assembly part number visible through flywleel housing opening | |
| 2 | N8976 | LARGE PLATE | PLATE - adapter, torque, Serial Range: converter-flywheel | |
| 3 | 826-10020 | BOLT,Hex, M10 x 1.5 x 20mm, Cl 10.9, Full Thd | - hex head, 10 mm - 15 x 20 mm (10.9) | |
| 4 | N8977 | WASHER | - special | |
| 5 | N8979 | SPLIT PIN/SAFETY PIN | DOWEL PIN - plate locating | |
| 6 | 514-613 | BOLT,Hex, M8 x 1 x 8mm, Cl 8.8, Full Thd | - hex head, 8 mm - 1 x 8 mm (8.8), plated, drain | |
| 7 | N8978 | WASHER | - seal | |
| 8 | N8980 | SHAFT | - torque converter assembly | |
| 9 | N8981 | BALL BEARING | BEARING - shaft | |
| 10 | N8983 | RING | SNAP RING - bearing retaining | |
| 11 | N8982 | O-RING | O-RING - shaft | |
| 12 | NSS | NOT SOLD SEPARAT | HOUSING - torque converter assembly, yellow | |
| 13 | NSS | NOT SOLD SEPARAT | EYEBOLT - lift | |
| 14 | 221-841 | PLUG | - hex socket head, 1/4" NPT | |
| 15 | 221-849 | PLUG,Hex Soc, 1/8"-27 | - hex socket head, 1/8" NPT | |
| 16 | N9002 | O-RING | - housing, small | |
| 17 | N8993 | O-RING | - housing, large | |
| 18 | N8988 | COVER | - bushing, shaft | |
| 19 | 861-6016 | HEX SOC SCREW,M6 x 16mm, Cl 12.9 | BOLT - hex socket head, 6 mm - 1 x 16 mm (12.9) | |
| 20 | N8989 | OIL SEAL | OIL SEAL - shaft, drive shaft end | |
| REF | INSTRUCTION | TORQUE CONVERTER ASSEMBLY - complete, continued, Includes: Ref. 21 - 40 | |
| 21 | N8984 | ADAPTER | - torque converter, includes bushing | |
| 22 | N8985 | GASKET | -, Serial Range: adapter-carrier | |
| 23 | 826-10045 | BOLT,Hex, M10 x 1.5 x 45mm, Cl 10.9 | | |
| 24 | N8992 | WASHER | - special | |
| 25 | N8986 | BEARING CARRIER | CARRIER - torque converter | |
| 26 | N8987 | GASKET | -, Serial Range: carrier-housing | |
| 27 | N8990 | OIL SEAL | - adapter to torque converter | |
| 28 | N8995 | PISTON | - pressure regulator valve, left-hand outer position | |
| 29 | N8996 | SPRING | - pressure regulator valve, left-hand outer position | |
| 30 | N8997 | PISTON | - relief valve, inlet port, left-hand inner position | |
| 31 | N8998 | SPRING | - relief valve, inlet port, left-hand inner position | |
| 32 | N8994 | SPLIT PIN/SAFETY PIN | PIN - piston retaining | |
| 33 | N8999 | GASKET | - relief valve cover | |
| 34 | N9000 | COVER | - left-hand relief valves | |
| 35 | N8992 | WASHER | - special | |
| 36 | 826-10030 | BOLT,Hex, M10 x 1.5 x 30mm, Cl 10.9, Full Thd | - hex head, 10 mm - 1.25 x 30 mm (10.9) | |
| 37 | N9004 | PISTON | - relief valve, outlet port, right-hand side | |
| 38 | N9003 | SPRING | - relief valve, outlet port, right-hand side | |
| 39 | N9001 | WASHER | - seal, relief valve plug | |
| 40 | N8991 | PLUG | - relief valve, outlet port, right-hand side | |
