| № | Номер | Название | Опции | Альт |
|---|
| A221-25 | PLUG - 3/4" socket hd. pipe for R.H. junction block | | |
| A7560 | O-RING,0.139" Thk x 1.296" ID, -219, Cl 5, 75 Duro | "O" RING - #6227-24 for A12305 hose to pump | |
| A12139 | O-RING | GASKET - "O" ring used on A12300 | |
| A12297 | TUBE - hyd. pump suction | | |
| A12298 | CLAMP | - suction tube | |
| | 3/8" x 1-1/4" fin. hex. bolt N.F. w/nut and lockwasher | | |
| A12299 | HYDRAULIC HOSE,1.25" ID x 5.50", SAE20R1 | 1.25" ID x 5.50", SAE 20R1 - Hyd. pump to tube | |
| | 1-3/4" hose clamp #9-1/2 | | |
| A12300 | ELBOW - hyd. pump inlet | | |
| A12301 | CLAMP,Half | CLAMP - 4 bolt split flange (1-1/4" size) Inlet | |
| A12302 | PUMP, HYDRAULIC | PUMP - hyd. #PH178BA or 20-7 | |
| | 3/8" x 1-1/8" fin. hex. bolt N.F. w/lockwasher | | |
| | 7/16" x 1-3/8" fin. hex. bolt N.C. w/lockwasher | | |
| | 1/2" x 2" fin. hex. bolt N.C. w/lockwasher | | |
| A12304 | GASKET,0.4mm Thk | - hyd. pump | |
| A12305 | | HOSE - hyd. pump, outlet to pressure tube | |
| A12306 | FLANGE | CLAMP - 4 bolt split flange, 1" size, outlet | |
| A12307 | | TUBE - hyd. pump to control valve pressure inlet | |
| A12308 | CLAMP | CLIP - tube 1" | |
| | 3/8" x 3/4" fin. hex. bolt N.F. w/lockwasher | | |
| | 3/8" x 1" fin. hex. bolt N.F. w/nut and lockwasher | | |
| | 3/8" x 1-1/4" fin. hex. bolt N.C. w/nut and lockwasher | | |
| A12309 | X | CONNECTOR - 1" adapter, hyd. lines to control valve and junction block | |
| A12310 | | VALVE - hyd. control #VDP4DD1B (See A12527 and A13915) | |
| | 1/2" x 4-1/2" fin. hex. bolt N.F. w/nut and lockwasher | | |
| | 1/2" SAE plain washer | | |
| | 1/2" P.T. socket hd. pipe plug | | |
| A12313 | LOCKNUT - for A12314 | | |
| A12314 | TUBE - hyd. control valve return | | |
| A12315 | X | ADAPTER - 90 degree "O" ring boss | |
| A12316 | Locknut used on A12315 | | |
| A12318 | X | GASKET - "O" ring (3/4" tubing) Used on A12333, A12338, and A12339 | |
| A12319 | X | GASKET - "O" ring (1" tube) Used on A12309, A12315, A12334 and A12335 | |
| A12320 | X | GASKET - "O" ring (1-1/4" tube) For A12314 tube | |
| A12321 | TUBE - hyd. control valve to junction block, R.H. tilt cyl. | | |
| A12322 | TUBE - hyd. control valve to junction block for L.H. tilt cyl. | | |
| A12323 | | TUBE - control valve to inner manifold tube for lift cyl. | |
| A12327 | TUBE | - manifold, inner hydraulic lift cylinder | |
| A12328 | | TUBE - control valve to outer manifold tube for lift cylinder | |
| A12331 | TUBE | - manifold, outer hyd. lift cylinder | |
| A12332 | CLAMP | - lift cylinder tube | |
| | 3/8" x 1" fin. hex. bolt N.F. w/nut and lockwasher | | |
| | 3/8" x 1-1/2" fin. hex. bolt N.F. w/nut and lockwasher | | |
| A12333 | HOSE | - hydraulic, lift cylinder | |
| A12334 | | HOSE - hydraulic tilt cylinder tube to junction block | |
| A12335 | HOSE ASSY. | HOSE - hydraulic tilt cylinder, Serial Range: tube-cylinder | |
| A12336 | TUBE | - R.H. intermediate, bucket tilt cylinder | |
| A12337 | | TUBE - L.H. intermediate, bucket tilt cylinder | |
| A12338 | X | FITTING - adapter for A12339 hose | |
| A12339 | HOSE ASSY. | HOSE - hyd., tilt cyl., from L.H. to R.H. cylinder | |
| A12527 | | VALVE - hyd. control (Float "O" type) (See A12310 and A13915) | |
| | 1/2" x 4-1/2" fin. hex. bolt N.F. w/nut and lockwasher | | |
| | 1/2" SAE plain washer | | |
| | 1/2" P.T. socket hd. pipe plug | | |
| A13241 | | CLAMP - tilt cyl. hose (Not illustrated) | |
| | 1/4" x 3/4" hex. bolt N.F. w/nut and lockwasher (Zinc plated) | | |
| A13242 | O-RING | CHAIN - tilt cyl. hose tie (Not illustrated) | |
| A13915 | LOCK VALVE | VALVE - hyd. control float detent in float and raise (See A12310 and A12527) | |
| F49010 | PLUG - sq. hd. 3/4" for L.H. junction block | | |
| | 1/8" pipe plug slotted hd | | |
