| № | Номер | Название | Опции | Альт |
|---|
| 120421A2 | PUMP, HYDRAULIC | VALVE ASSEMBLY - steering control, Includes: Ref. 1 - 33 | | | 377805A1R | REMAN-STEERING VALVE | Reman For New P/N 120421A2, Valve Assembly | | | 377805A1C | CORE-STEERING VALVE | Return Part Number | | | 1 | NSS | NOT SOLD SEPARAT | HOUSING - control valve | | | | Housing may have a 5/16-24 inch hole tapped next to the center hole (steering pilot pressure). The 5/16 inch hole has a Parker Hannifin fitting #2 hp50n-2 installed in it. This is a hollow hex straight thread O-ring plug. The plug must be purchased from Parker Hannifin with the O-ring or use 218-5205 plug with 237-6002 O-ring. | | | | 2 | NSS | NOT SOLD SEPARAT | SLEEVE - control valve | | | 3 | NSS | NOT SOLD SEPARAT | SPOOL - control valve | | | N14250 | KIT | - centering spring, Includes: Ref. 4 and 5 | | | 4 | L30889 | SPRING | - spool, centering, 6 in kit, order N14250 kit | | | 5 | NSS | NOT SOLD SEPARAT | SPACER - spring | | | 6 | L30888 | PIN | - roll, centering | | | 8 | 211-1006 | BALL,3/16" Dia | - chrome alloy steel, 3/16 inch, grade 24, anticavitation | | | 9 | 136494A1 | PLUG | RETAINER - spring, anticavitation | | | 10 | N14763 | SPRING | - anticavitation | | | 11 | 143717A1 | SCREW,Torx Hd, Flg, 5/16" - 24 x 2" | BOLT - 12 point flange, special, 5/16 NC x 2 inch | | | 12 | 135867A1 | CAP | - end, without O-ring groove | | | 13 | 143723A1 | SPACER | - gerotor, drive shaft | | | 143721A1 | GEAR-SET | GEROTOR - pump, control valve, Includes: Ref. 14 and 15 | | | 14 | NSS | NOT SOLD SEPARAT | ROTOR - control valve | | | 15 | NSS | NOT SOLD SEPARAT | STATOR - control valve | | | 16 | L30878 | DRIVE SHAFT | SHAFT - drive, gerotor, steering control valve | | | 17 | 135869A1 | PLATE | - spacer, with O-ring groove | | | 18 | 238-5040 | O-RING,0.07" Thk x 2.864" ID, -40, Cl 5, 75 Duro | -040, 70 Duro, 2.864" ID x .070" Thk, Cover and housing | | | | Part of Low Torque Seal Kit, P/N 1343658C3 | | | | 19 | L35368 | RETAINER | - check ball | | | 20 | 211-1010 | BALL,5/16" OD | - chrome alloy steel, 5/16 inch, grade 24, check | | | 21 | L30893 | O-RING,1/16" Thk x 5/16" ID | 7/16 x 5/16 x 1/16 inch, seat, inner | | | | Part of Low Torque Seal Kit, P/N 1343658C3 | | | | 22 | D82806 | VALVE SEAT | SEAT - ball, check | | | 23 | 238-5012 | O-RING,0.07" Thk x 0.364" ID, -12, Cl 5, 75 Duro | -012, 70 Duro, .364" ID x .070" Thk, Seat, outer | | | | Part of Low Torque Seal Kit, P/N 1343658C3 | | | | 24 | D82805 | SET SCREW | SCREW - set, hex socket, special | | | 25 | G13609 | THRUST BEARING,25.4mm ID x 39.67mm OD x 1.98mm W | BEARING, THRUST - Needle, Spool | | | 26 | D82804 | RACE | - thrust, bearing, bearing | | | 27 | S110170 | BUSHING | GLAND - seal, spool, seal | | | 28 | 238-5225 | O-RING,0.139" Thk x 1.859" ID, -225, Cl 5, 75 Duro | Seal retainer -225, 70 Duro, 1.859" ID x .139" Thk | | | | Part of Low Torque Seal Kit, P/N 1343658C3 | | | | 29 | NSS | NOT SOLD SEPARAT | SEAL - spool, inner | | | | Part of Low Torque Seal Kit, P/N 1343658C3 | | | | 30 | 697494R91 | OIL SEAL | SEAL - 1 inch ID, spool, outer | | | | Part of Low Torque Seal Kit, P/N 1343658C3 | | | | 31 | S110169 | WASHER | RING - retaining, seal | | | 32 | NSS | NOT SOLD SEPARAT | VALVE ASSEMBLY - relief, factory preset, do not remove | | | 33 | 196087A1 | SPRING | - detent, check ball | | | 1343658C3 | SEAL KIT | KIT - seal, low torque, Includes: Ref. 18, 21, 23, 28, 29, and 30 | |
|
|