Каталоги
Вход
CASE
>
HEAVY EQUIPMENT
>
CRAWLER EXCAVATORS
>
1100
>
(1187C) - CASE FELLER/BUNCHER CRAWLER EXCAVATOR (1/89-12/92)
>
(08) - HYDRAULICS
(8-02) - HYDRAULIC RESERVOIR AND HARNESS
(8-04) - HYDRAULIC OIL FILTER AND COOLER LINES
(8-06) - HYDRAULIC OIL FILTER AND COOLER LINES
(8-08) - HYDRAULIC CIRCUIT, MAIN HYDRAULIC PUMP LINES
(8-10) - HYDRAULIC CIRCUIT FOR CONTROLS, HYDRAULIC PUMP AND LINES
(8-12) - HYDRAULIC CIRCUIT FOR CONTROLS, HAND LEVER CONTROL VALVE LINES
(8-14) - HYDRAULIC CIRCUIT FOR CONTROLS, FOOT PEDAL CONTROL VALVE LINES
(8-16) - HYDRAULIC LEVELER LINES
(8-18) - SWING MOTOR HYDRAULIC CIRCUIT
(8-20) - HYDRAULIC CIRCUIT, BOOM CYLINDER
(8-22) - ARM AND TOOL CYLINDER CIRCUITS, TUBES FROM CONTROL VALVES AT TURNTABLE
(8-24) - ATTACHMENT CYLINDER CIRCUIT, TUBES FROM CONTROL VALVES AT TURNTABLE
(8-26) - ARM, TOOL, AND ATTACHMENT CYLINDER CIRCUIT, TUBES AT BOOM
(8-28) - ALLIED SAW HYDRAULIC CIRCUIT, TUBES AT BOOM
(8-30) - ALLIED SAW HYDRAULIC CIRCUITS, TUBES AT ARM
(8-32) - FELLER-BUNCHER HYDRAULIC CIRCUITS, TUBES AT ARM
(8-34) - FELLER-BUNCHER HYDRAULIC LINES
(8-36) - COLLECTOR HYDRAULICS
(8-38) - COLLECTOR HYDRAULICS
(8-40) - HYDRAULIC PUMP, PRIOR TO P.I.N. JAK0033141
(8-41A) - HYDRAULIC PUMP, P.I.N. JAK0033141 AND AFTER
(8-42) - EQUIPMENT PUMP, USED WITH CONTROL CIRCUITS
(8-44) - FOUR SPOOL CONTROL VALVE - INSIDE
(8-46) - FOUR SPOOL CONTROL VALVE - OUTSIDE
(8-48) - ONE SPOOL CONTROL VALVE, USED WITH TURNTABLE LEVELER CIRCUIT
(8-50) - MAIN RELIEF VALVE, USED WITH ONE SPOOL CONTROL VALVE
(8-52) - CIRCUIT RELIEF VALVES
(8-54) - HAND AND FOOT CONTROL VALVES
(8-56) - SOLENOID CONTROL VALVE
(8-58) - SOLENOID VALVE, USED ON MODELS WITH COLLECTOR
(8-60) - SWING CROSSOVER RELIEF VALVE
(8-62) - LEVELER CHECK VALVE
(8-64) - MULTIPLE CHECK VALVE, USED ON MODELS WITH COLLECTOR
(8-66) - SWING HYDRAULIC MOTOR
(8-68) - SEVEN PORT SWIVEL AND RELATED PARTS
(8-70) - HYDRAULIC OIL FILTER
(8-72) - BOOM CYLINDER
(8-74) - ARM & TOOL CYL. ARM CYL. (USED W/ FELLER-BUNCHER & ALLIED SAW) TOOL CYL. (USED W/ ALLIED SAW ONLY)
(8-76) - TOOL CYLINDER, USED WITH FELLER BUNCHER ONLY
(8-78) - LEVELER CYLINDER
(8-80) - SHEAR ARM CYLINDER
(8-82) - GRAB ARM AND CUTTER ARM CYLINDER, USED WITH FELLER-BUNCHER AND ALLIED SAW
(8-84) - COLLECTOR ARM CYLINDER
(8-02) - HYDRAULIC RESERVOIR AND HARNESS
(8-04) - HYDRAULIC OIL FILTER AND COOLER LINES
(8-06) - HYDRAULIC OIL FILTER AND COOLER LINES
(8-08) - HYDRAULIC CIRCUIT, MAIN HYDRAULIC PUMP LINES
(8-10) - HYDRAULIC CIRCUIT FOR CONTROLS, HYDRAULIC PUMP AND LINES
(8-12) - HYDRAULIC CIRCUIT FOR CONTROLS, HAND LEVER CONTROL VALVE LINES
(8-14) - HYDRAULIC CIRCUIT FOR CONTROLS, FOOT PEDAL CONTROL VALVE LINES
(8-16) - HYDRAULIC LEVELER LINES
(8-18) - SWING MOTOR HYDRAULIC CIRCUIT
(8-20) - HYDRAULIC CIRCUIT, BOOM CYLINDER
(8-22) - ARM AND TOOL CYLINDER CIRCUITS, TUBES FROM CONTROL VALVES AT TURNTABLE
(8-24) - ATTACHMENT CYLINDER CIRCUIT, TUBES FROM CONTROL VALVES AT TURNTABLE
(8-26) - ARM, TOOL, AND ATTACHMENT CYLINDER CIRCUIT, TUBES AT BOOM
(8-28) - ALLIED SAW HYDRAULIC CIRCUIT, TUBES AT BOOM
(8-30) - ALLIED SAW HYDRAULIC CIRCUITS, TUBES AT ARM
(8-32) - FELLER-BUNCHER HYDRAULIC CIRCUITS, TUBES AT ARM
(8-34) - FELLER-BUNCHER HYDRAULIC LINES
(8-36) - COLLECTOR HYDRAULICS
(8-38) - COLLECTOR HYDRAULICS
(8-40) - HYDRAULIC PUMP, PRIOR TO P.I.N. JAK0033141
(8-41A) - HYDRAULIC PUMP, P.I.N. JAK0033141 AND AFTER
(8-42) - EQUIPMENT PUMP, USED WITH CONTROL CIRCUITS
(8-44) - FOUR SPOOL CONTROL VALVE - INSIDE
(8-46) - FOUR SPOOL CONTROL VALVE - OUTSIDE
(8-48) - ONE SPOOL CONTROL VALVE, USED WITH TURNTABLE LEVELER CIRCUIT
(8-50) - MAIN RELIEF VALVE, USED WITH ONE SPOOL CONTROL VALVE
(8-52) - CIRCUIT RELIEF VALVES
(8-54) - HAND AND FOOT CONTROL VALVES
(8-56) - SOLENOID CONTROL VALVE
(8-58) - SOLENOID VALVE, USED ON MODELS WITH COLLECTOR
(8-60) - SWING CROSSOVER RELIEF VALVE
(8-62) - LEVELER CHECK VALVE
(8-64) - MULTIPLE CHECK VALVE, USED ON MODELS WITH COLLECTOR
(8-66) - SWING HYDRAULIC MOTOR
(8-68) - SEVEN PORT SWIVEL AND RELATED PARTS
(8-70) - HYDRAULIC OIL FILTER
(8-72) - BOOM CYLINDER
(8-74) - ARM & TOOL CYL. ARM CYL. (USED W/ FELLER-BUNCHER & ALLIED SAW) TOOL CYL. (USED W/ ALLIED SAW ONLY)
(8-76) - TOOL CYLINDER, USED WITH FELLER BUNCHER ONLY
(8-78) - LEVELER CYLINDER
(8-80) - SHEAR ARM CYLINDER
(8-82) - GRAB ARM AND CUTTER ARM CYLINDER, USED WITH FELLER-BUNCHER AND ALLIED SAW
(8-84) - COLLECTOR ARM CYLINDER