| № | Номер | Название | Опции | Альт |
|---|
| A50996 | GEAR, BEVEL | PINION AND RING GEAR - (Matched set), Includes: Ref. 1 and 2 | |
| 1 | NSS | NOT SOLD SEPARAT | GEAR - ring (rivet type) | |
| 2 | NSS | NOT SOLD SEPARAT | PINION - bevel 12" long (304.8 mm) | |
| 3 | A142676 | PINION | GEAR - pinion | |
| 4 | A146541 | PIN | - pinion gear | |
| 5 | A140705 | PIN | - 3/16 x 2" groove (4.76 x 50.8 mm) | |
| 6 | A39012 | WASHER,42.04mm ID x 60.2mm OD x 2.32mm Thk | - thrust, ring gear, 0.089" (2.26 mm) | |
| | Washer - If dealer is looking for the shim that is referred to in the Service Manual, the part number is A29338. | | |
| 6 | A39007 | WASHER | - thrust, ring gear, 0.094" (2.40 mm) | |
| 6 | A39008 | WASHER | - thrust, ring gear, 0.099" (2.52 mm) | |
| 6 | A39009 | WASHER | - thrust, ring gear, 0.104" (2.66 mm) | |
| 6 | A39010 | WASHER | - thrust, ring gear, 0.109" (2.78 mm) | |
| 6 | A39011 | WASHER | - thrust, ring gear, 0.119" (3.04 mm) | |
| 10 | A144266 | SHAFT | - cross | |
| 11 | A144337 | GEAR | ASSEMBLY - side, right hand (Identification groove on spline gear), Includes: Ref. 12 | |
| 12 | A29902 | PLUG | - RH side gear, 1-5/8" expansion (41.28 mm) | |
| 13 | A144339 | GEAR | ASSEMBLY - side, left hand (Identification groove on spline gear), Includes: Ref. 14 | |
| 14 | A35921 | BUSHING,34.89mm ID x 39.83mm OD x 20.65mm L | - LH side gear, 1-3/8 x 1-9/16 x 13/16" (34.93 x 39.69 x 20.64 mm) | |
| 15 | A49795 | OIL SEAL | SEAL - oil, LH side gear, 1-3/8 x 1-5/8 x 3/16" (34.93 x 41.28 x 4.76 mm) | |
| 18 | A140869 | HOUSING | CARRIER ASSEMBLY - side gear bearing, Includes: Ref. 19 | |
| 19 | A26744 | BEARING CUP,110.025 mm OD x 18.875 mm | CUP - bearing, side gear, 4-11/32" OD (110.33 mm) | |
| 20 | A30114 | CONE | - bearing, side gear, 2-1/4" ID (57.15 mm) | |
| 21 | A39289 | SHIM,.007" Thk | Bearing carrier (0.20 mm) .007" Thk | |
| 21 | G10719 | SHIM,.005" Thk | Bearing carrier (0.14 mm) .005" Thk | |
| 21 | G10720 | SHIM,.010" Thk | Bearing carrier (0.26 mm) .010" Thk | |
| 22 | A39273 | OIL SEAL | - oil, carrier, 2-1/4 x 3 x 1/2" (57.15 x 76.2 x 12.7 mm) | |
| 23 | G10347 | O-RING,0.139" Thk x 4.984" ID, -250, Cl 5, 75 Duro | - carrier seal, 5 x 5-1/4 x 1/8" (127 x 133.35 x 3.18 mm) | |
| 24 | 73-616 | SCREW,Slotted Flat Hd, 3/8"-16 x 1" | - carrier to transmission housing, 3/8-16 x 1" flat head, slotted | |
| 28 | A35923 | HOUSING | COVER ASSEMBLY - lock (on LH brake housing), Includes: Ref. 29 | |
| 29 | A35925 | BUSHING | - cover, 5/8 x 3/4 x 3/4" (15.88 x 19.05 x 19.05 mm) | |
| 30 | 61-536 | HEX SOC SCREW,5/16"-18 x 2 1/4" | SCREW - cover, 5/16 x 2-1/4" NC hex, socket head | |
| 31 | 113-111 | BOLT,Hex, 5/16" - 18 x 2-1/2", Gr 5 | | |
| 32 | A148547 | SHAFT | - actuating, 11-5/32" long (283.37 mm) | |
| 33 | A142029 | COLLAR | - differential lock | |
| 34 | A38749 | LEVER | - collar throw-out | |
| 35 | A65101 | FINGER | S - lever to collar (Replaces A38750) | |
| 36 | A156559 | SPRING | - throwout lever (Replaces A35933) | |
| 37 | A148426 | LEVER | - actuating | |
| 38 | 138-96 | LOCK PIN,3/16" x 1", Slotted | PIN, , Levers to shaft (4.76 x 25.4 mm) 3/16" x 1", Slotted | |
| 39 | A36446 | SPRING | - actuating lever | |
| 41 | A148134 | RETAINER | - actuating lever spring (with 2 holes) | |
| 42 | 138-98 | LOCK PIN,3/16" x 1 1/4", Slotted | PIN, , Retainer to shaft (4.76 x 31.75 mm) 3/16" x 1 1/4", Slotted | |
