| № | Номер | Название | Опции | Альт |
|---|
| 1 | D53968 | ARM | Loader lift (Use D16680 kit includes - items (1A, 4, 5, 6, 12, 13 and 24 on Figure 063C) | |
| 2 | D95342 | BUSHING | Lift arm at upright, Includes Ref. 2 - 4 | |
| 3 | D95351 | | SPARE PART Lift arm at lift cylinder | |
| 4 | D95341 | BUSHING | Lift arm at speed change bar | |
| 5 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | Straight (1/8" NPT) Early production has 4 fittings at lift cylinder | |
| 6 | D53178 | | SPARE PART Loader, Serial Range: arm-frame | |
| 7 | 195-2125 | WASHER,1 5/16" x 2" x .109" | Flat | |
| 8 | D26918 | SNAP RING,#125, Ext | | |
| 9 | D54696 | FRAME - upright (Use D16654 kit - includes items 7 and (2) each of items 12, 13 and 14 on Figure 063C), Includes: Ref. 10 - 12 | | |
| 10 | D95351 | | SPARE PART Lift cylinder (Used with grease fittings) | |
| 10 | D55457 | | SPARE PART Lift cylinder (Used with grease fitting) | |
| 11 | D53031 | BUSHING | Mounting, leveling link | |
| 12 | D33827 | BUSHING,31.98mm ID x 41.27mm OD x 31.8mm L | Mounting, lift arm | |
| 13 | 14-1036 | BOLT,Hex, 5/8" - 18 x 2-1/4", Gr 5 | | |
| 14 | 131-676 | LOCK NUT,5/8"-11, GB | Hex (5/8"-18 NF) | |
| 15 | D53175 | PIN | SPARE PART Lift, Serial Range: cylinder-frame | |
| 16 | 195-2105 | WASHER,1 1/16" x 1 3/4" x .065" | Flat (1") | |
| 16a | D57073 | | SPARE PART Lift cylinders | |
| 17 | D25277 | SNAP RING,23.5mm ID x 2.62mm Thk | Retaining | |
| 18 | REF | INSTRUCTION | CYLINDER - lift (See Figs. 132 and 134 for cylinders) | |
| 19 | D53778 | | SPARE PART Cylinder to lift arm | |
| 20 | 195-2105 | WASHER,1 1/16" x 1 3/4" x .065" | Flat (1") | |
| 21 | D25277 | SNAP RING,23.5mm ID x 2.62mm Thk | Retaining | |
| 22 | D95481 | AXLE PIN | Level, Serial Range: linkage-frame | |
| 23 | 195-2105 | WASHER,1 1/16" x 1 3/4" x .065" | Flat (1") | |
| 24 | D25277 | SNAP RING,23.5mm ID x 2.62mm Thk | Retaining | |
| 25 | D54061 | | SPARE PART Leveling, Includes Ref. 26 | |
| 26 | D53031 | BUSHING | Link | |
| 27 | D95481 | AXLE PIN | Leveling, Serial Range: linkage-bellcrank | |
| 28 | 195-2105 | WASHER,1 1/16" x 1 3/4" x .065" | Flat (1") | |
| 29 | D25277 | SNAP RING,23.5mm ID x 2.62mm Thk | Retaining | |
| 30 | D55800 | ARM ASSY. | BELLCRANK - self-leveling, Includes Ref. 31 - 32 | |
| 31 | D53031 | BUSHING | At cylinder and link mounting | |
| 32 | D34818 | BUSHING,25.63mm ID x 34.92mm OD x 19.05mm L | At loader arm | |
| 33 | 219-40 | LUBE NIPPLE,65 Degree Elbow, 1/8" - 27 NPTF | | |
| 34 | 13-636 | BOLT,Hex, 3/8" - 16 x 2-1/4", Gr 5 | | |
| 35 | D55006 | PIN | Bellcrank to loader arm | |
| 36 | 131-352 | LOCK NUT,3/8"-16, GA | Hex | |
| 37 | D53180 | | SPARE PART Bellcrank to bucket cylinder | |
| 38 | 13-636 | BOLT,Hex, 3/8" - 16 x 2-1/4", Gr 5 | | |
| 39 | 131-352 | LOCK NUT,3/8"-16, GA | Hex | |
| 40 | REF | INSTRUCTION | CYLINDER - bucket (See Fig. 140 for cylinders) | |
| 41 | D53544 | SPARE PART | GAUGE - bucket position | |
| 42 | D38648 | BLOCK | SADDLE - rubber | |
| 43 | 214-267 | HOSE CLAMP,#64, 3.56" - 4.5", Type F Worm | | |
| 44 | D53547 | ROD | Bucket indicator | |
| 45 | D53179 | PIN | Tilt cylinder to attachment bar | |
| 46 | D55518 | PIN | Attachment bar to loader arm | |
| 47 | 13-636 | BOLT,Hex, 3/8" - 16 x 2-1/4", Gr 5 | | |
| 48 | 131-352 | LOCK NUT,3/8"-16, GA | Hex | |
| 49 | D55487 | BAR | Attachment | |
| 50 | T41081 | PIN | Quick hitch, Includes Ref. 50A | |
| 50a | 138-46 | | SPARE PART 1/4" dia. x 3" 3/32" x 1 1/8", Slotted | |
| 51 | T40222 | SPLIT PIN/SAFETY PIN | Hair | |
| 52 | 13-620 | BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 5, Full Thd | | |
| 53 | 92-6 | LOCK WASHER,3/8" | | |
| 54 | D54006 | SHIM,.058" Thk | | |
| 55 | D54005 | SHIM,.109" Thk | | |
| 56 | 219-36 | LUBE NIPPLE,45 Degree Elbow, 1/8" - 27 NPTF | | |
