| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | SWIVEL - 7-port hydraulic (For breakdown, see figure 218) | |
| 2 | 218-797 | REDUCER,37 Degree, 1" x 3/4" Tube | ADAPTER - reducing (1" x 3/4" tube) 1-1/16" - 12 male 37 degrees flared) | |
| 3 | 218-348 | TUBE NUT,37 Degree, 1 5/16"-12, Type B | NUT - sleeve (1" tube) 1-5/16" - 12 female 37 degrees flared | |
| 4 | 218-796 | REDUCER,37 Degree, 5/8" x 3/8" Tube | ADAPTER - reducing (3/4" x 1/2" tube) 3/4" - 16 male 37 degrees flared) | |
| 5 | 218-346 | TUBE NUT,37 Degree, 1 1/16"-12, Type B | NUT - sleeve (3/4" tube) 1-1/16" - 12 female 37 degrees flared | |
| 6 | 218-5230 | ELBOW,90 Degree, 3/4"-16, 37 Degree x 3/4"-16, 37 Degree Fem Sw | - 90 degrees swivel (1/2" tube) 3/4" - 16 male x 3/4" - 16 female 37 degrees flared | |
| 7 | S11230 | HOSE | - high pressure 3/8" ID x 28" long (With 3/4" - 16 female pressed on couplings) | |
| 8 | 218-5231 | ELBOW,90 Degree, 1 1/16"-12, 37 Degree x 1 1/16"-12, 37 Degree Fem Sw | - 90 degrees swivel (3/4" tube) 1-1/16" - 12 male x 1-1/16" - 12 female 37 degrees flared | |
| 9 | 218-5234 | ELBOW,90 Degree, 1 5/16"-12, 37 Degree x 1 5/16"-12, 37 Degree Fem Sw | - 90 degrees swivel (1" tube) 1-5/16" - 12 male x 1-5/16" - 12 female 37 degrees flared | |
| 10 | S15468 | HOSE | - high pressure 3/4" ID x 28" long (With 1-1/16" - 12 female pressed on couplings) | |
| | ANOTHER HOSE USED (NOT A SUB) PART IS D44752 | | |
| 11 | REF | INSTRUCTION | VALVE - check (For breakdown, see figure 240) | |
| 12 | S229167 | | TUBE - hydraulic | |
| 13 | 218-840 | TEE,37 Degree, 3/4"-16 x 3/4"-16, Fem Sw Br | - (1/2" tube) 3/4" - 16 male x 3/4" - 16 male x 3/4" - 16 female 37 degrees flared | |
| 14 | S229165 | | TUBE - hydraulic | |
| 15 | S231141 | | TUBE - hydraulic 1" OD x 24.69, 2.8" L | |
| 16 | S8628 | HOSE | - high pressure 1" ID x 36" long (With 1-5/16" - 12 female pressed on couplings) | |
| 17 | S225570 | | TUBE - hydraulic 1.25" OD | |
| 18 | 113-410 | BOLT,Hex, 1/2" - 13 x 1-1/2", Gr 5, Full Thd | | |
| 19 | A14157 | FLANGE | CLAMP - split flange | |
| 20 | S6589 | O-RING | "O" RING - 1.859" ID x 2.125" OD | |
| 21 | REF | INSTRUCTION | MOTOR - track drive (For breakdown, see figure 230) | |
| 22 | 218-5351 | HYD CONNECTOR,3/4"-16, 37 Degree x 9/16"-18, O-Ring | CONNECTOR - (1/2" tube) 9/16" - 18 male x 3/4" - 16 male 37 degrees flared, Includes: Ref. 23 | |
| 23 | S6059 | O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 Duro | "O" RING - .468" ID x .624" OD | |
| 24 | 131-70 | NUT,1/2"-13, GB | NUT - self locking 1/2" NC | |
| 25 | S229162 | | CLAMP - wood block | |
| 26 | S105361 | | BAR | |
| 27 | 86505993 | BOLT,Hex, 1/2" - 13 x 4", Gr 5 | | |
