| № | Номер | Название | Опции | Альт |
|---|
| D43267 | FRONT IDLER | IDLER WHEEL AND BRACKET - L.H., Use R29569 idler for service, Includes: Ref. 1 - 16 | |
| D43268 | X | IDLER WHEEL AND BRACKET - R.H., Use R29569 idler for service (Not shown), Includes: Ref. 1 - 16 | |
| R53647 | WHEEL | IDLER WHEEL AND BRACKET - R.H. and L.H.(Replaced R29569), Includes: Ref. 1 - 16 | |
| 1 | 132-156 | PIN | - cotter, 1/4" dia. x 2-1/4" | |
| 2 | 25-1324 | SLOTTED NUT,1 1/2"-12, G5 | NUT - hex., slotted (1-1/2" - 12 NF) | |
| 3 | D36065 | WASHER | - special | |
| 4 | D36066 | X | BRACKET - L.H., D43267 and D43268 idler wheel | |
| 4 | R27941 | BRACKET | - R29569 idler | |
| 5 | D35267 | SEAL | - face, Includes: Ref. 6 - 8 | |
| 6 | NSS | NOT SOLD SEPARAT | BODY - seal, split | |
| D36826 | SEAL KIT | KIT - repair, Includes: Ref. 7 and 8 | |
| 7 | NSS | NOT SOLD SEPARAT | SEAL - rubber | |
| 8 | NSS | NOT SOLD SEPARAT | RETAINER - plastic | |
| 9 | D36069 | RING | - seal retaining | |
| 10 | 40413 | BEARING, CONE,2" ID x 1.2188" OD | BEARING - cone | |
| 11 | A27732 | BEARING CUP | BEARING - cup | |
| 12 | D42886 | FRONT IDLER | WHEEL - idler | |
| 13 | 221-841 | PLUG | - pipe, hex. socket head (1/4" NPT) If used | |
| 14 | D36068 | SHAFT | - idler | |
| 15 | D36067 | BRACKET | - R.H., D43267 and D43268 idler wheel | |
| 15 | R27941 | BRACKET | - R29569 idler | |
| 16 | 25-1524 | JAM NUT,Jam, 1 1/2"-12, G5 | - hex., lock (1-1/2" - 12 NF) | |
| 17 | 13-828 | BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5 | HHCS - 1/2" - 13 NC x 1-3/4" | |
| 18 | 92-8 | LOCK WASHER,1/2" | | |
| 19 | D36360 | YOKE | - front idler wheel | |
| 20 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight (1/8" NPT) | |
| 21 | D35287 | CHECK VALVE,5/8" - 18 | CHECK BALL ASSEMBLY - track adjuster | |
| D36642 | ADJUSTER | TRACK ADJUSTER - hydraulic | |
| 22 | D36361 | PISTON | - track adjuster | |
| 23 | D32043 | RING | - snap, front (Used with D37798 seal) | |
| 24 | D37798 | WIPER | SEAL - wiper (When stock is exhausted, use D95149 seal) | |
| 24 | D95149 | PACKING RING,60.24mm ID x 73.05mm OD x 7.92mm Thk | SEAL - wiper | |
| | Tubes without snap ring groove must use D95149 seal. | | |
| 25 | D30374 | RING,60.43mm ID x 73.15mm OD x 25.4mm L | - rider | |
| 26 | D30368 | BEARING | - backup | |
| 27 | D36971 | RING | PACKING - "U" cup | |
| 28 | D23191 | SNAP RING,#200, Ext | RING - snap, , rear #200, Ext | |
| 29 | D36357 | TUBE | - track adjuster | |
| | Tubes without snap ring groove must use D95149 seal. | | |
