| № | Номер | Название | Опции | Альт |
|---|
| 1 | 87323440 | FUEL HOSE | 1900 mm (74-13/16 in); Supply; Cut From S118466X; Routes Through Upper Part Of Hose Sleeve | |
| 2 | 214-1708 | HOSE CLAMP,#08, 0.5" - 0.91", Type M Worm | | |
| 3 | 87525901 | FUEL HOSE,9.53 mm ID x 2135.00 mm, SAE 30R2 or SAE 30R7 | Return; Cut From S118400X | |
| 4 | 515-25159 | CLAMP,5/8", Insul, 1/2" Bolt | Uses Existing Hydraulic Brake Hardware | |
| 5 | H434289 | MOUNTING CLIP,7/8”, Insulated, 1/2” Bolt | Double Clamp, 22.2 dia | |
| 6 | 614-10035 | BOLT,Hex, M10 x 1.5 x 35mm, Cl 8.8, Full Thd | Thread to Head | |
| 7 | 895-11010 | WASHER,11mm ID x 20mm OD x 2mm Thk | | |
| 8 | 832-10410 | NUT,M10 x 1.5, Cl 8 | | |
| 9 | 194199A1 | FUEL FILTER | In-Line Fuel Filter | |
| 10 | 515-25444 | CLAMP,1 3/4", Insul, 7/16" Bolt | | |
| 11 | 614-8020 | BOLT,Hex, M8 x 1.25 x 20mm | | |
| 12 | 895-11008 | WASHER,9mm ID x 16mm OD x 1.6mm Thk | | |
| 13 | 87527573 | FUEL HOSE,12.70 mm ID x 135.00 mm, SAE 30R2 or SAE 30R7 | Supply; Cut From S118466X | |
| 14 | 87442270 | FITTING | 90 deg Elbow; Includes 87445405 O-Ring | |
| 87445405 | O-RING | | |
| 15 | 515-25238 | CLAMP,15/16", Insul, 1/2" Bolt | | |
| 16 | 87578254 | FUEL HOSE,12.70 mm ID x 415.00 mm | Separator to In-Line Filter; Cut from S118466X | |
| REF | INSTRUCTION | SEE NOTES BELOW BEFORE CHOOSEING FOR REF 18-20A | |
| 18 | 87564387 | FILTER ASSY | WATER SEPARATOR Without Heater; Incl. Ref 20 | |
| 18a | 87438159 | SENSOR | Water Sensor Used with Ref 20A | |
| 19 | 87612475 | SENSOR | Water Sensor Used with Ref. 20 (Not Shown) | |
| 20 | 87803445 | FUEL FILTER,79.2mm OD x 4.3" L, 30 Microns | Cartridge, Service Replacement | |
| 20a | 87435526 | FUEL FILTER | Used With Ref 18A | |
| 21 | 614-10040 | BOLT,Hex, M10 x 1.5 x 40mm, Cl 8.8, Full Thd | | |
| 22 | 895-11010 | WASHER,11mm ID x 20mm OD x 2mm Thk | | |
| 23 | 87340827 | SLEEVE | 1350 mm (53-5/32 in) Long | |
| 24 | L18331 | CABLE TIE,375.9mm L, Nylon | CABLE STRAP | |
| 25 | 217-168 | FITTING,1/2" Hose Barb x 1/2" Male NPTF | Use With 345-147 Thread Sealant | |
| 26 | 217-335 | FITTING,90 Degree Elbow, 1/2" Hose Barb x 1/2" Male NPTF | | |
| 27 | 86984713 | SHUT-OFF VALVE | Brass; One-Way; 1/2 FNPT x 1/2 FNPT | |
| 28 | 87578255 | FUEL HOSE,12.70 mm ID x 465.00 mm | Supply; Cut from S118466X | |
| 29 | 87400460 | 90 ELBOW | Incl. 87445404 O-Ring | |
| 87445404 | O-RING,2.5mm Thk x 8mm ID, 60 Duro | | |
| 30 | R45966 | CLAMP,0.94mm, Coat, 90 Degree Twist | 90 Degree Twist | |
| 31 | 627-12030 | BOLT,Hex, M12 x 1.75 x 30mm, Cl 10.9, Full Thd | | |
| 32 | 895-11012 | WASHER,13.5mm ID x 24mm OD x 2.5mm Thk | | |
| 33 | 87447306 | SQUARE NUT,M12 x 21mm x 21mm x 11mm H ZND Cl 5A | Cage, M12 | |
| 34 | 336371A1 | PIN,4.88mm OD x 14.23mm L | Nut Retainer | |
