(05-06) - AXLE, REAR - SPINDLES

№	Номер	Название	Опции
*		D138954 Two Wheel Drive Rear Axle
*		If Used
1	D138954	AXLE, FRONT	Rear, Incl. 2, 3
1	D138954R	REMAN-FRT AXLE wo DL
1	D138954C	CORE-FRONT AXLE	Return Number
2	D137345	BUSHING,50.19mm ID x 60mm OD x 36mm L
3	D138047	BUSHING,50.22mm ID x 60mm OD x 54mm L
4	800-44050	SNAP RING,M50, Ext
5	191796A1	WASHER,51.6mm ID x 92mm OD x 1.98mm Thk	Used as a Spacer
6	D123684	WASHER,52.3mm ID x 114mm OD x 4.78mm Thk
7	D123655	SEAL,50mm ID x 60.15mm OD x 4.06mm Thk
8	337783A1	PIN,50mm OD x 436.5mm L	If Used (Held in Place with Snap Ring Ref 10)
8a	397783A1	PIVOT PIN,50mm OD x 427mm L	If Used (Held in Place with Plate Ref 45 and Bolts Ref 46)
9	219-1	LUBE NIPPLE,1/8" - 27 NPTF	If used
10	800-44050	SNAP RING,M50, Ext	If Used
11	G107720	CYLINDER,Double Acting, 38.1mm Rod, 85.1mm Stroke	2 Wheel Drive, See Figure 05-05
11	G107720R	REMAN-HYD CYLINDER
11	G107720C	CORE-HYD CYLINDER	Return Number
12	218-5136	ELBOW,45 Degree Elbow, 3/4" - 16 Male JIC x 3/4" - 16 Male ORB	Incl. 13
13	237-6008	O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro
14	13-1638	BOLT,Hex, 1" - 8 x 2-3/8", Gr 5, Full Thd	No Longer Used, For Service Order 446106A1 Bolt
14	446106A1	BOLT (MACHINE),Hex, 1" - 8 x 2 3/8", Gr 5
15	D36505	WASHER,26.99mm ID x 47.63mm OD x 2.38mm Thk
16	D123806	LINK, CONNECTING	Steering
17	D125340	SPINDLE	Left Hand, Incl. 19, 0.059 Inch Radius, Used With A61447 Cone, See Figure 05-07, If Used
17a	320977A1	SPINDLE	Left Hand, Without Bushings, .137 Inch Radius, Used With 296824A1 Cone, See Figure 05-07, For Service, Order 335130A1, REF 17B, Which Incl. Bushing, If Used
17b	335130A1	SPINDLE	Left Hand, Incl. 19, .137 Inch Radius, Used With 296824A1 Cone, See Figure 05-07, If Used
18	D125341	SPINDLE	Right Hand, Incl. 19, Not Illustrated, .059 Inch Radius, Used With A61447 Cone, See Figure 05-07, If Used
18a	303428A1	SPINDLE	Right Hand, Without Bushings, Not Illustrated, .137 Inch Radius, Used With 296824A1 Cone, See Figure 05-07, For Service, Order 335132A1, REF 18B, Which Incl. Bushing, If Used
18b	335132A1	SPINDLE	Right Hand, Incl. 19, Not Illustrated, .137 Inch Radius, Used With 296824A1 Cone, See Figure 05-07, If Used
19	D127507	BUSHING,22.33mm ID x 32.25mm OD x 25mm L
20	D150155	PIN,22.2mm OD x 89mm L
21	219-89	LUBE NIPPLE,45 Degree Elbow, 1/8" NPTF
22	413-632	BOLT,Hex, 3/8" - 16 x 2", Gr 5
23	492-11038	LOCK WASHER,3/8"
24	425-106	NUT,3/8"-16, Cl 5
25	D57486	PIN
26	80679	LOCK WASHER,1/20.507 CST ZND
27	425-118	NUT,1/2"-20, G5
28	A27602	THRUST BEARING,2.041" ID x 2.9475" OD x 0.635"
29	D123865	PIVOT PIN,50.8mm OD x 168.91mm L	King Pin
30	219-89	LUBE NIPPLE,45 Degree Elbow, 1/8" NPTF
31	100-21237	SNAP RING,2.375", Int, #237
32	D72371	WASHER,3.17mm ID x 60.2mm OD x 4.57mm Thk
33	238-5139	O-RING,0.103" Thk x 2.175" ID, -139, Cl 5, 75 Duro
34	A28230	NEEDLE BEARING,Needle, 50.78mm ID x 60.34mm OD x 25.4mm W
35	D72372	WASHER,50.85mm ID x 69.6mm OD x 0.81mm Thk
36	D61297	SEAL,50.8mm ID x 60.22mm OD x 6.4mm Thk
37	495-11094	WASHER,7/8", SAE	15/16 x 1-3/4 x 1/8
38	103-1687	SNAP RING,#87, Ext
39	218-481	ELBOW,90 Degree Elbow, 7/16" - 20 Male JIC x 1/8" - 27 Male NPTF	If Used
40	399554A1	HOSE ASSY.,1/8" ID x 550mm L, ES-B120 Class 16	Lubrication Line, If Used
41	218-1275	NUT,Blkhd, 7/16"-20	If Used
42	495-11047	WASHER,7/16", SAE	If used
43	381442A1	CONNECTION	If Used
44	219-1	LUBE NIPPLE,1/8" - 27 NPTF	If used
45	377009A1	BACK PLATE	No Longer Available, Order 377009A2, Ref 45A
45a	377009A2	BACK PLATE	60 x 38; If Used; Not Illustrated
46	607-10020	BOLT,Hex, M10 x 20mm, Cl 10.9	Replaces 627-10020 Non-Locking Bolt Used On Some Models; If Used
47	896-11010	WASHER,11mm ID x 21mm OD x 2.5mm Thk	If Used
	352487A3	KIT DEPOT ASSEMBLING	Two Wheel Drive Axle, Incl. 7, 14, 15, 17A, 18A, 19 - 38