| № | Номер | Название | Опции | Альт |
|---|
| 1 | D86343 | SPINDLE | - right-hand | | | | Welded-on end for spindle is D69553 for right-hand. | | | | 2 | D86344 | SPINDLE | - left-hand | | | | Welded-on end for spindle is D69554 for left-hand | | | | 3 | D65522 | SPARE PART | AXLE ASSEMBLY - front, Includes: Ref. 4 and 5 | | | 4 | D61241 | BUSHING,44.68mm ID x 57.15mm OD x 23.88mm L | - axle | | | 5 | D43940 | BUSHING,44.68mm ID x 57.15mm OD x 25.4mm L | - axle | | | 6 | 219-89 | LUBE NIPPLE,45 Degree Elbow, 1/8" NPTF | GREASE FITTING - 45º, 1/8" pipe, self-tapping | | | 7 | D72337 | PIN,50.8mm OD x 168.91mm L | KINGPIN - front axle | | | 8 | L30246 | BEARING | NEEDLE BEARING - kingpin | | | 9 | A27463 | SNAP RING,2.375", Int, #237 | Brg 2.375", Int, #237 | | | 10 | D72371 | WASHER,3.17mm ID x 60.2mm OD x 4.57mm Thk | SPACER - kingpin | | | 11 | A27602 | THRUST BEARING,2.041" ID x 2.9475" OD x 0.635" | ROLLER BEARING - spindle | | | 12 | D72372 | WASHER,50.85mm ID x 69.6mm OD x 0.81mm Thk | THRUST WASHER - bearing | | | 13 | A23904 | O-RING,0.103" Thk x 2.175" ID, -139, Cl 5, 75 Duro | -139, 90 Duro, 2.175" ID x .103" Thk, King pin seal | | | 14 | D61297 | SEAL,50.8mm ID x 60.22mm OD x 6.4mm Thk | - oil | | | 15 | D57486 | PIN | - kingpin lock | | | 16 | 192-23 | LOCK WASHER,1/2" | WASHER, LOCK, 1/2" | | | 17 | 129-125 | NUT,1/2"-20, G5 | | | | 18 | D64171 | PIN,44.45mm OD x 352.55mm L | - axle pivot | | | 19 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , axle pivot pin #175, Ext | | | 20 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, 1-3/4", special, spacer | | | 21 | D61076 | WASHER,46mm ID x 114mm OD x 4.78mm Thk | - spacer | | | 22 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, , Special short, if used 90º, 1/8" NPT x .84" lg | | | 23 | 221-11 | PLUG,Sq Hd, 1/8"-27 | - square head, 1/8" NPT, used on top of axle when grease fitting is located on front of axle | | | 24 | 219-89 | LUBE NIPPLE,45 Degree Elbow, 1/8" NPTF | GREASE FITTING - 45º, 1/8" pipe, self-tapping, front of axle, used with Ref. 23 | | | 25 | 132-50 | COTTER PIN,1/8" x 1 1/4" | Pin, Split (Cotter), 1/8" x 1 1/4" | | | 26 | 129-610 | SLOTTED NUT,5/8"-18, G5 | | | | 27 | 195-2084 | WASHER,13/16" x 1 1/4" x .067", HDN | - flat, 3/4", special | | | D73398 | ROD | TIE ROD ASSEMBLY - tractor, Includes: Ref. 28 - 31 | | | 28 | D88491 | BALL JOINT,7/8" - 18 x 3-3/4" | - tie rod, right-hand, Includes: Ref. 30 and 31 | | | 29 | D88492 | BALL JOINT,7/8" - 18 x 3-3/4" | - tie rod, left-hand, Includes: Ref. 30 and 31 | | | 30 | N7681 | BOOT | COVER - dust, D88491 or D88492 ball joint | | | 31 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT | | | 32 | D73397 | TIE-ROD,7/8” ID x 1.5” OD x 42.1” L | TIE ROD - tractor | | | 33 | D73799 | CLAMP | - tie rod, includes hardware | |
|
|