| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | BOOM - backhoe, see Figure 9-34 | |
| 2 | 219-89 | LUBE NIPPLE,45 Degree Elbow, 1/8" NPTF | FITTING - grease, 45º, 1/8 PT self-tapping x 25/32 inch | |
| 3 | D55727 | ARM | DIPPER ASSEMBLY - extension, inner, used with D73826 dipper housing, Refs. 7-11, if used | |
| | Inner dipper extension assemblies are not interchangeable. D55727 (Ref. 3) inner dipper extension assembly must be used with D73826 (Ref. 7) outer dipper housing assembly. Either D55727 (Ref. 3) or D133021 (Ref. 3A) inner dipper extension assembly can be used with D133096 or D133421 (Ref. 7 or 11A) outer dipper housing assembly. (D73826 dipper housing has weld flash on center at bottom inside of housing.) | | |
| 3a | D133021 | ARM | DIPPER ASSEMBLY - extension, inner, used with D133096 or D133421 dipper housing, Ref. 7 - 11 or 11A - 11D, if used | |
| | Inner dipper extension assemblies are not interchangeable. D55727 (Ref. 3) inner dipper extension assembly must be used with D73826 (Ref. 7) outer dipper housing assembly. Either D55727 (Ref. 3) or D133021 (Ref. 3A) inner dipper extension assembly can be used with D133096 or D133421 (Ref. 7 or 11A) outer dipper housing assembly. (D73826 dipper housing has weld flash on center at bottom inside of housing.) | | |
| 3b | D133010 | PLATE | - wear, 6 feet (1830 mm) long, D133021 dipper only | |
| 4 | D55688 | STRIP | - wear, dipper slide, steel, D55727 dipper only | |
| 5 | D50146 | BUSHING,44.68mm ID x 57.15mm OD x 38.1mm L | - D55727 or D133021 dipper, at bucket | |
| 6 | D37443 | BUSHING,44.68mm ID x 57.15mm OD x 50.8mm L | - D55727 or D133021 dipper, at bucket link | |
| D73826 | COVER | DIPPER HOUSING ASSEMBLY - backhoe, no longer used, order D133096 dipper housing, D37611 pin, D45034 pin, and (4) D127471 spacers | |
| D133096 | DIPPER | HOUSING ASSEMBLY - backhoe, service replacement, Includes: Ref. 7 - 11 | |
| | Inner dipper extension assemblies are not interchangeable. D55727 (Ref. 3) inner dipper extension assembly must be used with D73826 (Ref. 7) outer dipper housing assembly. Either D55727 (Ref. 3) or D133021 (Ref. 3A) inner dipper extension assembly can be used with D133096 or D133421 (Ref. 7 or 11A) outer dipper housing assembly. (D73826 dipper housing has weld flash on center at bottom inside of housing.) | | |
| 7 | NSS | NOT SOLD SEPARAT | HOUSING - dipper | |
| 8 | D30756 | BUSHING,51.02mm ID x 63.5mm OD x 31.8mm L | - at boom | |
| 9 | D34340 | BUSHING,44.68mm ID x 53.98mm OD x 25.4mm L | - at dipper cylinder, left-hand side plate, if used | |
| 10 | D46405 | BUSHING,44.68mm ID x 53.98mm OD x 19.05mm L | - dipper cylinder, inner plate | |
| 11 | D61708 | BLOCK | - stop | |
| D133421 | SLIDE | DIPPER HOUSING ASSY, backhoe does not require D127471 spacers at dipper housing to boom mounting hole location, used in production on some models, not avail., for service order D133096 dipper housing, D37611 pin, D45034 pin, 4, D127471 spacers, & D55727 | |
| | Inner dipper extension assemblies are not interchangeable. D55727 (Ref. 3) inner dipper extension assembly must be used with D73826 (Ref. 7) outer dipper housing assembly. Either D55727 (Ref. 3) or D133021 (Ref. 3A) inner dipper extension assembly can be used with D133096 or D133421 (Ref. 7 or 11A) outer dipper housing assembly. (D73826 dipper housing has weld flash on center at bottom inside of housing.) | | |
| 11a | NSS | NOT SOLD SEPARAT | HOUSING - dipper | |
| 11b | D30756 | BUSHING,51.02mm ID x 63.5mm OD x 31.8mm L | - at boom | |
| 11c | D46405 | BUSHING,44.68mm ID x 53.98mm OD x 19.05mm L | - at dipper cylinder | |
| 11d | D61708 | BLOCK | - stop | |
| 12 | D134699 | NOZZLE CAP | NOZZLE - extension, grease fitting, for 1/4 inch diameter hole, used with item 13 to lubricate dipper slide, D133421 or D133096 dipper housing, also order 9-72236 instruction sheet | |
| 13 | 219-89 | LUBE NIPPLE,45 Degree Elbow, 1/8" NPTF | FITTING - grease, 45º, 1/8 PT self-tap x 25/32 inch, used with item 12 or 13A to lubricate dipper side | |
| 13a | 219-107 | NOZZLE CAP | NOZZLE - 1/2 inch diameter hole, extension, grease fitting, used with item 13 to lubricate dipper slide, D73826 dipper housing | |
| 14 | D127471 | SPACER | - dipper housing to boom, 5/16 inch (8 mm) thick, used with D73826 or D133096 dipper housing only (item 7) | |
| 15 | D44813 | SHIM,53.34mm ID x 76.2mm OD x 0.89mm Thk | Spacer (.78 mm) .035" Thk | |
| 15a | 195-2155 | WASHER,2 1/16" x 3" x .109" | - flat, 2-1/16 x 3 x 1/8 inch, between boom and dipper | |
| 16 | D45034 | PIN | - 2 OD x 11-3/4 inch long, dipper housing to boom, used with D73826 or D133096 dipper housing only (item 7) | |
| 17 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , pin #200, Ext | |
| 18 | D37611 | PIVOT PIN,44.45mm OD x 255.59mm L | PIN - dipper cylinder to dipper housing, used with D73826 or D133096 dipper housing only (item 7) | |
| 19 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, 1-13/16 x 2-1/2 x 1/8 inch, one on each side of cylinder eye | |
| 20 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 21 | D124163 | ARM | EXTENSION ASSEMBLY - dipper, Includes: Ref. 22 | |
| 22 | D43940 | BUSHING,44.68mm ID x 57.15mm OD x 25.4mm L | - bucket link pin | |
| 23 | 26-832 | BOLT,Hex, 1/2" - 13 x 2", Gr 8 | - hex, 1/2 NC x 2 inch, grade 8, replaces bolt with lock washer and hex nut used on some models | |
| 24 | D61701 | BRACE | PLATE - guide | |
| 26 | 131-72 | LOCK NUT,1/2"-13 | NUT - heavy hex, self-locking, 1/2 inch NC, replaces lock washer and hex nut used on some models | |
| 27 | D44882 | PIN,38.1mm OD x 203.2mm L | - extension, Serial Range: cylinder-housing | |
| 28 | D25279 | SNAP RING,M35, Int | RING - snap, pin retaining | |
| 29 | G101183 | CYLINDER | - dipper extension, parts list Figure 8-82 | |
| 30 | D53818 | PIN,44.45mm OD x 278.89mm L | - dipper and dipper extension to bucket links | |
| 31 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, 1-13/16 x 2-1/2 x 1/8 inch, bucket link to extension | |
| 32 | 51200255 | SEALING WASHER,45.77mm ID x 62.18mm OD x 1.59mm Thk | WASHER - spacer, 1/16 inch (1.6 mm) thick | |
| 33 | D77725 | WASHER | - spacer, 5/16 inch (7.9 mm) thick | |
| 34 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 35 | D38907 | PIN,1.75" OD x 5 5/16 L | - bucket cylinder to dipper extension | |
| 36 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 37 | REF | INSTRUCTION | CYLINDER - bucket, see parts list Figure 8-76 through 8-80 | |
| 38 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, 1-13/16 x 2-1/2 x 1/8 inch, bucket cylinder to links | |
| 39 | D53818 | PIN,44.45mm OD x 278.89mm L | - bucket cylinder | |
| 40 | D93227 | BUSHING | SPACER - bucket link | |
| 41 | D126492 | LINK | - bucket cylinder to bucket, Includes: Ref. 42 & 43 | |
| 42 | D121845 | BUSHING,44.68mm ID x 57.15mm OD x 70mm L | - at cylinder | |
| 43 | D30933 | BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L | - at bucket | |
| 44 | D89620 | LINK | - bucket cylinder to dipper, Includes: Ref. 45 | |
| 45 | D46405 | BUSHING,44.68mm ID x 53.98mm OD x 19.05mm L | - link | |
| 46 | D121564 | PIN | - dipper cylinder to dipper housing, used with D133421 | |
| | housing only | | |
| 47 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | |
| 48 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, 1-13/16 x 2-1/2 x 1/8 inch, used with D133421 housing only | |
| 49 | D42911 | PIN | - dipper housing to boom, used with D133421 housing only | |
