| № | Номер | Название | Опции | Альт |
|---|
| 1 | 282015A5 | HARNESS | - engine, main, models without air conditioning, Replaces 282015A3 and 282015A4 | | | 1a | 282016A5 | HARNESS | - engine, main, models w/air conditioning, not shown, used in production, Replaces 282016A3 & 282016A4, for service order 282015A5 engine harness above & 186607A1 air conditioning adapter harness on figu 4-18 | | | 2 | A166057 | TEMPERATURE SENDER,1/2" - 14 NPTF | SENDER - engine water coolant temperature | | | 3 | 193-1000 | NUT,Keps, w/LW,#10-32 | - hex, with external tooth lock washer, No. 10 NF | | | 4 | 1345488C3 | TEMPERATURE SWITCH | SWITCH - coolant temperature | | | 5 | 515-23127 | CLAMP,1/2", Insul, 3/8" Bolt | P-type, Uses existing engine hardware 1/2", Insul, 3/8" Bolt | | | 6 | D143830 | CABLE | WIRE - 675 mm long, Serial Range: alternator-starter | | | 7 | 493-21033 | LOCK WASHER,Int Tooth, 5/16" | WASHER - internal tooth lock, 5/16 inch | | | 8 | 829-1408 | NUT,Hex, M8 x 1.25, Cl 10.9 | | | | 9 | 493-21020 | LOCK WASHER,Int Tooth, #10 | WASHER, LOCK, (3/16") Int Tooth, #10 | | | 10 | 824-1405 | NUT,M5, Cl 5 | | | | 11 | D147383 | CLIP,5/8" J | CLAMP - J-type, uses existing engine hardware | | | 12 | D137363 | SWITCH | - return-to-dig, see figure 9-10 for switch mounting | | | 13 | 515-23127 | CLAMP,1/2", Insul, 3/8" Bolt | P-type 1/2", Insul, 3/8" Bolt | | | 14 | D147383 | CLIP,5/8" J | CLAMP - J-type | | | 15 | 515-23127 | CLAMP,1/2", Insul, 3/8" Bolt | P-type 1/2", Insul, 3/8" Bolt | | | 16 | 844-10020 | BOLT,Hvy Hex, M10 x 20mm, Cl 8.8 | - heavy hex flange, 10 - 1.5 x 20 mm | | | 17 | A166057 | TEMPERATURE SENDER,1/2" - 14 NPTF | SENDER - transmission temperature | | | 18 | 193-1000 | NUT,Keps, w/LW,#10-32 | - hex, with external tooth lock washer, No. 10 NF | | | 19 | 242999A1 | CLAMP | - P-type, double | | | 20 | 829-2410 | FLANGE NUT,M10 x 1.5, Flg, Cl 10 | | | | 21 | L71879 | DIODE ELEMENT,400V, 3A | DIODE - harness, isolation | | | 22 | 192196A2 | CLAMP | - P-type, spring lock | | | 23 | 184188A1 | HARNESS | WIRE - power, starter to fuseblock, see figure 4-20 Ref. 8 for nut at relay block | | | 24 | 49773 | CLAMP | - P-type, 1-1/4 inch ID | | | 25 | 844-10025 | BOLT,Hex, M10 x 25mm, Cl 8.8 | - heavy hex flange, 10 - 1.5 x 25 mm | | | 26 | 515-23127 | CLAMP,1/2", Insul, 3/8" Bolt | P-type, See figure 7-12, Ref 29 for brake cable bracket 1/2", Insul, 3/8" Bolt | | | 27 | 814-10060 | BOLT,Hex, M10 x 1.5 x 60mm, Cl 8.8 | See figure 7-12, Ref. 29 for brake cable support bracket and additional hardware Hex, M10 x 60, 8.8 | | | 28 | L18337 | CABLE TIE,9.95"-12.1" lg | STRAP - tie, 15 inch, nylon, retaining | | | 29 | 1983233C1 | RESTRICTION SWITCH | SWITCH - restriction, air cleaner | | | 30 | 277016A1 | PRESSURE SWITCH | SENDER Oil Pressure, 10 mm - 1, O-ring thread (Part number is stamped on sender), Includes Ref. 30A | | | 30a | 637-62081 | O-RING,1.6mm Thk x 8.1mm ID, Cl 6, 90 Duro | - 8.1 ID x 1.6 mm wide, 277016A1 Sender, Not shown | | | 31 | 123809A2 | WIRE HARNESS | HARNESS, WIRE, Clutch cutout, Transmission gear shift lever | | | 32 | 123097A1 | SWITCH | - push-button, clutch cutout, gear shift lever, see figure 6-28 for lever and knob | | | 33 | D147383 | CLIP,5/8" J | CLAMP - J-type, uses existing loader valve mounting hardware | | | 34 | 781-24613 | SELF-TAP SCREW,Hex Flg, M6 x 1 x 13mm | BOLT - hex flange, self-tapping, 6 - 1.0 x 13 mm | | | 35 | 305342A1 | STRAP,450mm L | - tie, 450 mm (18 inch) long, air filter restriction branch to air filter inlet tube | | | 36 | 614-8016 | BOLT,Hex, M8 x 1.25 x 16mm, Cl 8.8, Full Thd | - hex, full threads, 8 - 1.25 x 16 mm | | | 37 | 892-11008 | LOCK WASHER,8mm ID | WASHER, LOCK, M8 | | | 38 | 333264A1 | HARNESS | - pigtail, differential lock, if used | |
|
|