| № | Номер | Название | Опции | Альт |
|---|
| 1 | D138666 | HARNESS | engine, main, with fuse block in harness on right hand side of engine and starter relay near battery, used on models without electronic instrument control center | | | | Plastic fuse block for this harness is P/N 245435C1 | | | | | See Figure 04-114 for special parts used on models with electronic instrument control center. | | | | 2 | D88052 | CLAMP,25.4mm ID, 10.31mm Bolt Hole, P Type | P-type, harness, rear clamp uses existing hardware | | | 3 | 113-205 | BOLT,Hex, 3/8" - 16 x 5/8", Gr 5 | | | | 4 | 192-21 | LOCK WASHER,3/8" | WASHER, LOCK, 3/8" | | | 5 | 25-226 | SQUARE NUT,Sq, 3/8"-16 | square, 3/8"-16 NC | | | 6 | D128310 | RELAY | starter, 30 amperes | | | | 40 amperes is marked on the relay. This is the resistance rating. The inductive rating is 30 amperes. We use this inductive rating in our literature. | | | | 7 | 187-576 | SELF-TAP SCREW,Hex Wash Hd, #10 x 3/8" | SCREW self tapping, No. 10-24 x 3/8" | | | 8 | D138306 | LARGE PLATE | PLATE relay mounting, no longer used, order P/N D140282 plate | | | 8a | D140282 | SUPPORT | PLATE relay mounting | | | 9 | 515-23190 | CLAMP,3/4", Insul, 3/8" Bolt | P-type, harness | | | 10 | 113-206 | BOLT,Hex, 3/8" - 16 x 3/4", Gr 5, Full Thd | | | | 11 | 192-21 | LOCK WASHER,3/8" | WASHER, LOCK, 3/8" | | | 12 | 25-226 | SQUARE NUT,Sq, 3/8"-16 | square, 3/8"-16 NC | | | 13 | 515-23190 | CLAMP,3/4", Insul, 3/8" Bolt | P-type, harness | | | 14 | L71879 | DIODE ELEMENT,400V, 3A | DIODE harness, at power shuttle | | | 15 | 515-23190 | CLAMP,3/4", Insul, 3/8" Bolt | P-type, harness, uses existing steering hydraulic tube hardware | | | 16 | D138333 | BRACKET | fuse block mounting | | | 17 | 187-580 | SELF-TAP SCREW,Hex Wash Hd, #10 x 3/4" | SCREW hex slotted washer head, self tapping, No. 10-32 x 3/4", plated | | | 18 | A149804 | FUSE | 30 amperes | | | 19 | 814-12016 | BOLT,Hex, M12 x 1.75 x 16mm, Cl 8.8, Full Thd | hex head, 12 mm-1.75 x 16 mm, 8.8, plated | | | 20 | 892-1112 | LOCK WASHER,M12 | WASHER - lock, 12 mm, plated | | | 21 | 49838 | CLAMP | P-type, harness, uses existing hardware | | | 22 | 193-60 | LOCK WASHER,Int Tooth, 1/4" | WASHER, LOCK, Int Tooth, 1/4" | | | 23 | 825-1106 | NUT,Hex, M6, Cl 8 | hex, 6 mm-1, plated | | | 24 | A166057 | TEMPERATURE SENDER,1/2" - 14 NPTF | SENDER engine water coolant temperature | | | 25 | 193-1000 | NUT,Keps, w/LW,#10-32 | AND LOCK WASHER, No. 10-32 NF, plated | | | 26 | 49838 | CLAMP | P-type, harness, left hand side of engine, front clamps use existing hardware | | | 27 | A162297 | SWITCH | - Oil Pressure Sender, Used on Models Without Electronic Instrument Control Center, See Figure 4-114 for Special Parts Used on Models With Electronic Instrument Control Center | | | 28 | L103131 | INDICATOR | SENDER air filter restriction indicator | | | 29 | 221-1335 | COUPLING,Pipe, 1/8" NPT | | | | 30 | D36264 | FITTING | ADAPTER special, includes safety filter | | | 31 | 515-23127 | CLAMP,1/2", Insul, 3/8" Bolt | P-type, harness, uses existing hardware | | | 32 | D43839 | CLAMP | P-type, at air conditioner compressor wire | | | 33 | 814-10030 | BOLT,Hex, M10 x 1.5 x 30mm, Cl 8.8, Full Thd | | | | 34 | 892-1110 | LOCK WASHER,M10 | WASHER lock, 10 mm, plated | | | 35 | D140301 | HARNESS | WIRE used in addition to main engine harness on models with engine fuse block, attaches to engine coolant temperature switch and engine harness to oil temperature switch at return flange, see Figure 08-294 for flange and connecting parts | | | | Special parts used on models with auxiliary hydraulics for optional rear hydraulic attachments | | | | 36 | L18337 | CABLE TIE,9.95"-12.1" lg | STRAP tie, attaches harness to hydraulic plumbing on right hand side of chassis | | | | Special parts used on models with auxiliary hydraulics for optional rear hydraulic attachments | | |
|
|