| № | Номер | Название | Опции | Альт |
|---|
| 1 | D90868 | LATHE | TOWER - swing, uses one boom mounting pin, see Figure 9-30 for swing tower and bushings, if used | | | 1a | REF | INSTRUCTION | TOWER - swing, uses two boom mounting pins, see Figure 9-30 for swing tower and bushings, if used | | | 2 | D91240 | PIN,50.8mm OD x 402mm L | - boom to swing tower, used with Ref. 1 swing tower | | | 3 | 195-2155 | WASHER,2 1/16" x 3" x .109" | - flat, 2-1/16 x 3 x 1/8 inch, used with Ref. 1 swing tower | | | 4 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , pin, used with ref. 1 swing tower #200, Ext | | | 5 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8 PT x 21/32 inch | | | 5a | 219-89 | LUBE NIPPLE,45 Degree Elbow, 1/8" NPTF | FITTING - grease, 45º, 1/8 PT self-tap x 25/32 inch, used on models with extendable dipper, if used | | | 6 | D121393 | LOWER LINK | BOOM - backhoe, mounts to swing tower with (1) Ref. 2 pin, used with D90868 swing tower, Ref.1, Includes: Ref. 7 - 10 | | | 6a | D131153 | LOWER LINK | BOOM - backhoe, mounts to swing tower with (2) Ref. 40 pins, used with D127544 or D136868 swing tower, Ref.1A, Includes: Ref. 7 - 10 | | | 7 | D95362 | BUSHING | - boom cylinder mounting, top | | | 8 | D31142 | BUSHING,51.02mm ID x 63.5mm OD x 38.1mm L | - dipper pivot | | | 9 | D50698 | BUSHING,51.03mm ID x 69.98mm OD x 40.64mm L | - boom pivot | | | 10 | D50004 | BLOCK | - tapped, welded to boom, if used | | | 11 | D88417 | CAGE ASSY. | CAGE - weld to boom for retaining Ref. 12, if used | | | 12 | 224-2206 | SQUARE NUT,Sq, 3/8"-16 | - square, 3/8 inch NC, if used | | | 13 | D44813 | SHIM,53.34mm ID x 76.2mm OD x 0.89mm Thk | Spacer, between swing tower and boom .035" Thk | | | 14 | D49866 | PIN,38.1mm OD x 96.52mm L | - boom cylinder to swing tower | | | 15 | 113-252 | BOLT,Hex, 3/8" - 16 x 3-3/4", Gr 5 | | | | 16 | 131-52 | NUT,3/8"-16, GC | NUT - light hex, self-locking, 3/8 inch NC | | | 17 | D28610 | WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk | - spacer, flat, 1-1/2 inch (38 mm) ID | | | 18 | G106168 | CYLINDER,Double Acting, 44.45mm Rod, 1062.99mm Stroke | ASSEMBLY - boom, see parts list Figure 8-72 | | | 18 | G106168R | REMAN-HYD CYLINDER | 35C, 35C WL, Both BACKHOE, ASSEMBLY, boom | | | 18 | G106168C | CORE-HYD CYLINDER | Return Number | | | 19 | D49865 | PIN,50.8mm OD x 304.8mm L | - boom cylinder to boom, retained by bolt, if used | | | 20 | 413-872 | BOLT,Hex, 1/2" - 13 x 4-1/2", Gr 5 | - hex, 1/2 NC x 4-1/2 inch, if used | | | 21 | 131-70 | NUT,1/2"-13, GB | NUT - light hex, self-locking, 1/2 inch NC, if used | | | 22 | L103135 | PIN | - boom cylinder to boom, retained by snap rings, if used | | | 23 | 72990 | WASHER | - flat, 2 inch (51 mm) ID x 1/16 inch (.06 mm) thick, if used | | | 24 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , pin, if used #200, Ext | | | 25 | 195-2155 | WASHER,2 1/16" x 3" x .109" | - flat, 2-1/16 x 3 x 1/8 inch, used as a spacer | | | 26 | G106682 | CYLINDER ASSY. | CYLINDER ASSEMBLY - dipper, see parts list Figure 8-74 | | | 27 | D72359 | PIN,44.45mm OD x 142.24mm L | - dipper, Serial Range: cylinder-boom | | | 28 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | | | 29 | 495-81226 | WASHER,46.02mm ID x 63.5mm OD x 3.35mm Thk | - flat, 1-13/16 x 2-1/2 x 1/8 inch | | | 30 | D52522 | PIN,44.45mm OD x 211.84mm L | - dipper, Serial Range: cylinder-dipper | | | 31 | 51200255 | SEALING WASHER,45.77mm ID x 62.18mm OD x 1.59mm Thk | WASHER - spacer, 1-3/4 inch (44 mm) ID | | | 32 | D25280 | SNAP RING,#175, Ext | Ring, Snap, , pin #175, Ext | | | 33 | D45523 | PIN,50.8mm OD x 276.35mm L | -, Serial Range: boom-dipper | | | 34 | D44813 | SHIM,53.34mm ID x 76.2mm OD x 0.89mm Thk | Spacer, 2 inch (51 mm) ID .035" Thk | | | 35 | 95-81155 | WASHER,52.38mm ID x 76.2mm OD x 3.35mm Thk | - flat, 2-1/16 x 3 x 1/8 inch | | | 36 | 72990 | WASHER | - 2 inch (51 mm) ID x 1/16 inch (1.6 mm) thick | | | 37 | 95-81155 | WASHER,52.38mm ID x 76.2mm OD x 3.35mm Thk | - flat, 2-1/16 x 3 x 1/8 inch | | | 38 | D26919 | SNAP RING,#200, Ext | Ring, Snap, , pin #200, Ext | | | 39 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | | | 40 | D125594 | PIN,50.8mm OD x 136mm L | - boom to swing tower, used with Ref. 1A swing tower | | | 41 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8 PT x 21/32 inch, used with Ref. 1A swing tower | | | 42 | D125595 | BUSHING | SPACER - pin, used with Ref. 1A swing tower | | | 43 | 195-41 | WASHER,5/8" | Used with Ref. 1A swing tower 5/8" | | | 44 | 492-11062 | BEARING WASHER,5/8" | WASHER, LOCK, , Used with Ref. 1A swing tower 5/8" | | | 45 | 413-1024 | BOLT,Hex, 5/8" - 11 x 1-1/2", Gr 5 | Used with Ref. 1A, swing tower Hex, 5/8"-11 x 1 1/2", G5, Full Thd | | | 46 | D83825 | BLOCK | - tapped, welded to boom , USED WITH EXTENDABLE DIPPER | | | 47 | 25-288 | SQUARE NUT,Sq, 1/2"-13, G2, Hvy | - square, heavy, 1/2 inch NC, welded to boom , USED WITH EXTENDABLE DIPPER | | | 48 | 224-2206 | SQUARE NUT,Sq, 3/8"-16 | - square, 3/8 inch NC , USED WITH EXTENDABLE DIPPER | | | 49 | D88417 | CAGE ASSY. | CAGE - welded to boom , USED WITH EXTENDABLE DIPPER | | | 50 | D45559 | BRACKET | - tube clamp, welded to boom , USED WITH EXTENDABLE DIPPER | | | 51 | D62468 | GUARD | - boom cylinder, if used | | | 52 | D62467 | BRACKET | - guard mounting, if used , BOOM CYLINDER | | | 53 | 413-552 | BOLT,Hex, 5/16" - 18 x 3-1/4", Gr 5 | - hex, 5/16 NC x 3-1/4 inch , BOOM CYLINDER GUARD | | | 54 | 131-176 | LOCK NUT,Prev Torque, Hex, 5/16" - 18, Gr A | NUT - hex, self-locking, 5/16 inch NC, BOOM CYLINDER GUARD | |
|
|