| № | Номер | Название | Опции | Альт |
|---|
| 1 | H627240 | TUBE,1" OD | - suction, if used, Serial Range: -1166142 | | | 1 | H649293 | | TUBE - suction, used on tractor SN 1166142 thru SN 1205402, except SN 1205397, if used 1" OD x 9.38, 5.33" L | | | 1 | H660365 | | TUBE - suction, used on tractor SN 1205397, 1205402 and after, if used 25.4 mm OD | | | 2 | 218-5069 | HYD CONNECTOR,1-5/16" - 12 Male JIC x 1-5/16" - 12 Male ORB | CONNECTOR - straight, male, Incl. Ref. 3 | | | 3 | 218-5010 | O-RING,0.116" Thk x 1.171" ID, -916, Cl 6, 90 Duro | - connector | | | 4 | H401901 | SPACER | - pump, used on 1.8 litre engine tractors only | | | 5 | H626903 | PUMP | - variable displacement, may order rebuilt pump H654327 for service, does not have circuit relief valves, parts list Figure 74, if used | | | 6 | H660399 | PUMP | - variable displacement, may order rebuilt pump H667956 for service, includes, circuit relief valves, may be used to replace item 5 pump, parts list Figure 74, if used | | | 7 | 113-417 | BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 5, Full Thd | | | | 8 | 192-23 | LOCK WASHER,1/2" | WASHER, LOCK, 1/2" | | | 9 | 218-5118 | ELBOW,90 Degree Elbow, 1-1/16" - 12 Male JIC x 1-5/16" - 12 Male ORB | - 90 degree, male, adjustable, Includes: Ref. 10 | | | 10 | 218-5010 | O-RING,0.116" Thk x 1.171" ID, -916, Cl 6, 90 Duro | - elbow | | | 11 | H336974 | HOSE,0.75" ID x 30.00", SAE 100R9 | Motor Supply, use (2) with 1.8 Litre Engine or (1) with 2.1 Litre Engine 0.75" ID x 30.00", SAE 100R9 | | | 12 | H218297 | HOSE | - motor supply, 37" (939 MM) long, use with 2.1 litre engine only | | | 13 | 218-5118 | ELBOW,90 Degree Elbow, 1-1/16" - 12 Male JIC x 1-5/16" - 12 Male ORB | - 90 degree, male, adjustable, Includes: Ref. 14 | | | | This elbow is part of H669077 neutral centering kit. See Figure 88 for complete kit. | | | | 14 | 218-5010 | O-RING,0.116" Thk x 1.171" ID, -916, Cl 6, 90 Duro | - elbow | | | 15 | 218-5144 | ELBOW,45 Degree Elbow, 1-1/16" - 12 Male JIC x 1-5/16" - 12 Male ORB | - 45 degree, male, adjustable, if used, Includes: Ref. 16 | | | 16 | 218-5010 | O-RING,0.116" Thk x 1.171" ID, -916, Cl 6, 90 Duro | - elbow | | | 17 | H626911 | MOTOR | - propulsion, may order rebuilt motor H654335 for service, parts list Figure 78 | | | 17a | H44727 | GASKET | used to mount propulsion motor, not shown | | | 18 | 113-412 | BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5 | | | | 19 | 192-23 | LOCK WASHER,1/2" | WASHER, LOCK, 1/2" | | | 20 | 217-348 | FITTING,90 Degree Elbow, 1/2" Hose Barb x 3/4" - 16 Male ORB | ELBOW - 90 degree, pump to hose, Includes: Ref. 21 | | | 22 | L55952 | HOSE,0.50" ID x 16.00", SAE 100R3 | Drain, Pump to Motor 0.50" ID x 16.00", SAE 100R3 | | | 23 | 214-252 | HOSE CLAMP,#08, 0.5" - 0.91", Type F Worm | CLAMP - hose, worm drive, SAE No. 8 | | | 24 | 218-348 | TUBE NUT,37 Degree, 1 5/16"-12, Type B | ELBOW - 90 degree, hose to motor, Includes: Ref. 25 | | | 26 | H336966 | | FITTING - tee, special, motor to hose, for oil temperature sender see Figures 48 and 50, Includes: Ref. 27 | | | 28 | H336388 | HOSE | - motor to tank, return, 21-1/2" (546 MM) long | | | 29 | 214-252 | HOSE CLAMP,#08, 0.5" - 0.91", Type F Worm | CLAMP - hose, worm drive, SAE No. 8 | | | 21 | 218-5006 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk, elbow | | | 25 | 218-5006 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk, elbow | | | 27 | 218-5006 | O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro | 8-1, 90 Duro, .644" ID x .087" Thk, fitting | |
|
|