| № | Номер | Название | Опции | Альт |
|---|
| 1 | A151669 | PUMP, FUEL INJECTION | PUMP ASSEMBLY - fuel injection (Model DBGFCC431-65AT) (engine SN. 2835094 and after) (0 degree B.T.C.), Includes: Ref. 2 - 46 | |
| 1 | A51631 | PUMP | ASSEMBLY - fuel injection (Model DBGFCC431-49AJ) Prior to engine SN. 2835094) (8 degree B.T.C.), Includes: Ref. 2 - 46 | |
| 2 | A44710 | SHAFT | ASSEMBLY - drive, with pin | |
| 3 | R14711 | SEAL | - drive shaft | |
| 4 | 192-24 | LOCK WASHER,9/16" | WASHER, LOCK, 9/16" | |
| 5 | 129-126 | NUT,9/16"-18, G8 | - 9/16" NF hex, jam | |
| 6 | 74244 | SEAL,0.139" Thk x 1.046" ID, -215, Cl 5, 75 Duro | - pump housing, 1-1/16 x 1-5/16 x 1/8" (27 x 33.34 x 3.18 mm) | |
| 7 | G48502 | SPRING | - thrust, pump shaft, 1-3/16" free length (30.16 mm) | |
| 8 | A44653 | PLUNGER | - thrust spring | |
| 12 | A43869 | SLEEVE | CONNECTOR - outlet line | |
| 13 | 73666 | AIR CLEANER | O-RING - connector, 9/16 x 11/16 x 1/16" (14.29 x 17.46 x 1.59 mm) | |
| 14 | A43870 | FILTER, FUEL | FILTER - element | |
| 15 | A43871 | SEAL | - element, 3/8 x 1/2 x 1/16" (9.53 x 12.7 x 1.59 mm) | |
| 16 | A28090 | O-RING,0.301" ID x 0.441" OD x 0.07" | -011, 70 Duro, .301" ID x .070" Thk - Connector | |
| 17 | A43867 | SPRING | - regulator, 5/8" free length (15.88 mm) | |
| 18 | 73621 | PISTON | - regulator | |
| 19 | A43868 | SEAL | - regulator piston (rubber) | |
| 20 | 217-433 | PLUG,Hex Soc, 1/4" - 18 NPTF | End plate Hex Soc, 1/4"-18 NPTF | |
| 21 | 73452 | COVER | - timing window | |
| 22 | NLS | NO LONGER SERVICED | - timing window cover | |
| 23 | 73514 | SCREW | - timing window cover | |
| 26 | G45338 | ARM | - throttle | |
| 27 | G48505 | SPRING | - throttle arm | |
| 28 | G49621 | RETAINER | - throttle arm spring | |
| 29 | 165-124 | HEX SOC SCREW,Prev Torque, #10 - 32 x 3/4" | SCREW - throttle arm | |
| 30 | G49088 | ADJUSTMENT SCREW,#10 - 32 x 1.781" | - high idle adjusting | |
| 31 | NLS | NO LONGER SERVICED | - low idle adjusting | |
| 32 | 51200274 | NUT | - lock, idle adjusting screws | |
| 35 | G45337 | ARM | - shut-off | |
| | Ref. 35 AND 36 ILLUSTRATIONS ARE LABELED INCORRECT ON THE ILLUSTRATION ITEM 36 IS THE ARM. | | |
| 36 | NSS | NOT SOLD SEPARAT | LEVER - shut-off arm | |
| | Ref. 35 AND 36 ILLUSTRATIONS ARE LABELED INCORRECT ON THE ILLUSTRATION ITEM 36 IS THE ARM. | | |
| 37 | 165-1 | SCREW,#8 x 1/4" | - position, shut-off arm | |
| 38 | 193-91 | LOCK WASHER,Int Tooth, #8 | WASHER, LOCK, , Position screw Int Tooth, #8 | |
| 39 | 165-30 | HEX SOC SCREW,#10 - 32 x 3/8" | SCREW - retaining, shut-off arm | |
| 40 | 193-99 | LOCK WASHER,Int Tooth, #10 | WASHER, LOCK, , Retaining screw Int Tooth, #10 | |
| 41 | 163-7 | SCREW,Sl Hex, #8 - 32 x 3/8" | BOLT - lock, shut-off cable | |
| 42 | G49088 | ADJUSTMENT SCREW,#10 - 32 x 1.781" | - shut-off arm adjusting | |
| 43 | 86837534 | LOCK WASHER | - lock, adjusting screw | |
| 44 | 73613 | SCREW | - connector, injection tubes | |
| 45 | G49407 | WASHER,9.63mm ID x 12.83mm OD x 1.65mm Thk | WASHER - connector screws | |
| 46 | A47066 | COUPLING | CONNECTOR - return line | |
| | contains a glass check ball. | | |
