| № | Номер | Название | Опции | Альт |
|---|
| 1 | A151015 | CRANKSHAFT | - engine | |
| 2 | A36495 | BEARING LINER,73.72mm ID x 78.54mm OD x 39.69mm W | INSERT - main bearing, rear, (Standard) (Set of 2) | |
| 2 | A36496 | LINING | INSERT - main bearing, rear, 0.002 inch undersize (0.06 mm) (Set of 2) | |
| 2 | A36497 | BEARING LINER,73.44mm ID x 78.54mm OD x 39.69mm W | INSERT - main bearing, rear, 0.010 inch undersize (0.26 mm) (Set of 2) | |
| 2 | A36498 | KIT | INSERT - main bearing, rear, 0.020 inch undersize (0.50 mm) (Set of 2) | |
| 2 | A36499 | BEARING LINER | INSERT - main bearing, rear, 0.030 inch undersize (0.76 mm) (Set of 2) | |
| 3 | A36485 | LINING | INSERT - main bearing, intermediate, (Standard) (Set of 2) | |
| 3 | A36486 | LINING | INSERT - main bearing, intermediate, 0.002 inch undersize (0.06 mm) (Set of 2) | |
| 3 | A36487 | BEARING LINER,73.44mm ID x 78.54mm OD x 25.4mm W | INSERT - main bearing, intermediate, 0.010 inch undersize (0.26 mm) (Set of 2) | |
| 3 | A36488 | CRANKSHAFT BEARING,3.067" ID x 3.092" OD x 1" | INSERT - main bearing, intermediate, 0.020 inch undersize (0.50 mm) (Set of 2) | |
| 3 | A36489 | LINING | INSERT - main bearing, intermediate, 0.030 inch undersize (0.76 mm) (Set of 2) | |
| 4 | A36490 | BEARING LINER,73.41mm ID x 96.84mm OD x 34.87mm W | INSERT - main bearing, center, (Standard) (Set of 2) | |
| 4 | A36491 | LINING | INSERT - main bearing, center, 0.002 inch undersize (0.06 mm) (Set of 2) | |
| 4 | A36492 | BEARING LINER,73.66mm ID x 96.84mm OD x 34.87mm W | INSERT - main bearing, center, 0.010 inch undersize (0.26 mm) (Set of 2) | |
| 4 | A36493 | BEARING LINER,73.66mm ID x 96.84mm OD x 34.87mm W | INSERT - main bearing, center, 0.020 inch undersize (0.50 mm) (Set of 2) | |
| 4 | A36494 | LINING | INSERT - main bearing, center, 0.030 inch undersize (0.76 mm) (Set of 2) | |
| 5 | A36480 | BEARING LINER,73.69mm ID x 78.54mm OD x 32.66mm W | INSERT - main bearing, front, (Standard) (Set of 2) | |
| 5 | A36481 | LINING | INSERT - main bearing, front, 0.002 inch undersize (0.06 mm) (Set of 2) | |
| 5 | A36482 | BEARING LINER,73.44mm ID x 78.54mm OD x 32.66mm W | INSERT - main bearing, front, 0.010 inch undersize (0.26 mm) (Set of 2) | |
| 5 | A36483 | LINING | INSERT - main bearing, front, 0.020 inch undersize (0.50 mm) (Set of 2) | |
| 5 | A36484 | LINING | INSERT - main bearing, front, 0.030 inch undersize (0.76 mm) (Set of 2) | |
| 7 | A39288 | GEAR | - crankshaft | |
| 8 | A29259 | SLINGER | - oil | |
| 9 | A39110 | OIL SEAL,54mm ID x 76.33mm OD x 9.09mm Thk | - oil, front | |
| 10 | A155893 | SLEEVE | KIT - wear | |
| 11 | A156354 | PULLEY | - fan drive (Replaces A138244) | |
| 12 | A39132 | KEY | - pulley and gear | |
| 13 | A35673 | NUT | - pulley retaining | |
| 18 | A38390 | RETAINER | - rear oil seal | |
| 19 | A39188 | GASKET | - retainer | |
| 20 | A51339 | OIL SEAL,101.6mm ID x 127.1mm OD x 9.5mm Thk | - oil, rear | |
| 21 | 26-412 | BOLT,Hex, 1/4" - 20 x 3/4", Gr 8 | - hex, 1/4 NC x 3/4 inch | |
| 21 | 26-416 | BOLT,Hex, 1/4" - 20 x 1", Gr 8 | - hex, 1/4 NC x 1 inch | |
| 22 | 92-4 | LOCK WASHER,1/4" | WASHER, LOCK, 1/4" | |
| 34 | A38915 | FLYWHEEL | ASSEMBLY, Includes: Ref. 35 | |
| 35 | A182021 | GEAR | - ring, starter (Replaces G11710), flywheel | |
| 36 | 121-300 | LOCK BOLT,Lock Place, Hex, 7/16" - 20 x 1 1/8", Gr 8 | BOLT - hex, 7/16 NF x 1-1/8 inch, flywheel | |
| 37 | A30013 | WASHER,11.51mm ID x 19.05mm OD x 1.59mm Thk | - flywheel bolt | |
