(03-01) - FUEL LINES, RESERVOIR - FILTER, IN-LINE FUEL

№	Номер	Название	Опции
1	364001A5	FUEL TANK	42 gal, Incl. Ref 6; Without Welded Fuel Sender Tubes; Includes Left Hand Steps, Mounts to Left Hand Side of Chassis; Replaces 364001A4 Tank; If Used
1	87419601	FUEL TANK	42 gal, Incl. Ref 6; With Welded Fuel Sender Tubes; Includes Left Hand Steps, Mounts to Left Hand Side of Chassis; If Used
2	443375A1	BOLT,Hex, M20 x 2.5 x 60mm, Cl 10.9	M20 x 60; With Loctite; Replaces 627-20060 Bolt Without Loctite Used On Some Models
3	302358A1	WASHER,21mm ID x 54mm OD x 4mm Th
3a	896-11020	WASHER,22mm ID x 37mm OD x 4mm Thk	22 x 37 x 4 mm
4	185926A1	SPACER,21mm x 40mm x 6.6mm Th	Upper Left Hand Side of Tank
4a	409473A1	SPACER	Lower Left Hand Side of Tank
5	130049A1	FILLER CAP	Cap
6	86625138	PLUG,7/18" - 14	Drain, Includes Ref 6A, Included with Ref 1
6a	237-6010	O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro
7	214-1708	HOSE CLAMP,#08, 0.5" - 0.91", Type M Worm	1/2 - 29/32
8	214-1704	HOSE CLAMP,#04, 0.25" - 0.62", Type M Worm
10	380442A1	SENDER UNIT	SENDER Fuel Level, 40 Gallon Tank, With Tubes, Includes Grounding Nut, Lock Washer and Flat Washer; If Used
10	87408480	SENDER UNIT	Fuel Level, 40 Gallon Tank, Without Tubes; Used With 87419601 Tank; If Used
11	188311A2	GASKET,2.38mm Thk
12	D75465	SCREW,#10 - 32 x 5/8"	No. 10 NF x 5/8
13	214-1708	HOSE CLAMP,#08, 0.5" - 0.91", Type M Worm	1/2 - 29/32
14	234892A1	HOSE	HOSE,LARGE 1100 mm (43-5/16 in), Vent
15	130047A1	BREATHER ASSY.	Vent
16	515-23127	CLAMP,1/2", Insul, 3/8" Bolt
17	276-24924	SELF-TAP SCREW,3/8" - 16 x 1 1/2"	3/8 x 1-1/2
17a	495-11041	WASHER,0.406" ID x 0.812" OD x 0.065" W	Flat, (13/32 x 13/16 x 1/16")
18	1348264C1	HOSE CLAMP	3/8 ID
19	234888A1	FUEL HOSE,12.70 mm ID x 1280.00 mm , SAE 30R7	Fuel Supply, to Fuel Lift Pump
20	244552A1	FUEL HOSE,9.53 mm ID x 2550.00 mm, SAE 30R7	Return, Fuel Cooler to Tank
21	399004A1	HOSE PROTECTION,38.90 mm ID x 270.00 mm
22	L18337	CABLE TIE,9.95"-12.1" lg	CABLE STRAP 15 in
23	194199A1	FUEL FILTER	In-Line Fuel Filter
24	410847A1	FITTING	90 deg Elbow, 12 stem x 1/4 PT, With Loctite; To Engine Fuel Lift Pump; Replaces 217-372 Elbow Without Loctite Used On Some Models
25	393827A1	FUEL HOSE,12.70 mm ID x 152.00 mm, SAE 30R7	Fuel Filter to Lift Pump
31	307577A1	BOLT	Special, M8 x 20
32	892-11010	LOCK WASHER,M10
35	829-1410	NUT,M10 x 1.5, Cl 10.9
37	D40442	MOLDING	Trim, 305 mm (12 in), Cut From F42827; If Used
38	814-10045	BOLT,Hex, M10 x 1.5 x 45mm, Cl 8.8	Used with 188009A2 or 188009A3 Cover on Models with Three Spool Loader Valve
38	614-10020	BOLT,Hex, M10 x 1.5 x 20mm, Cl 8.8, Full Thd	Used with 189602A2 or 189602A3 Cover On Models With Two Spool Loader Valve
39	D80270	ANTI-SKID STRIP,635mm / 25 Inch	Non-Slip, 635 mm (25 in) x 51 mm (2 in)
40	379499A2	COOLER	Fuel
41	814-8050	BOLT,Hex, M8 x 1.25 x 50mm, Cl 8.8	If used
42	143219A1	HOSE PROTECTION,19mm ID x 24mm OD x 450mm L	Hose Sleeve
43	L18337	CABLE TIE,9.95"-12.1" lg	CABLE STRAP 15 in
44	303922A1	FUEL HOSE	1225 mm (48-1/4 in), Injection Pump to Fuel Cooler
45	189602A3	COVER	Mounted Above Fuel Reservoir, Models Without Clam Bucket or Auxiliary Hydraulics; Replaces 189602A2 With Hole Instead of Slot on Tab
45a	188009A3	COVER	Mounted Above Fuel Reservoir, Models With Clam Bucket; Replaces 188009A2 With Hole Instead of Slot on Tab
46	191046A1	ORNAMENTAL STRIP	Trim, 650 mm (25-5/8 in), Cut From A165860; Apply 75 mm (3 in) of Trim to Front Lower Edge and 240 mm (9-7/16 in) of Trim to Outside Lower Edge of Cover
47	895-11008	WASHER,9mm ID x 16mm OD x 1.6mm Thk	If Used
48	397548A3	PLATE	Mud
49	614-10020	BOLT,Hex, M10 x 1.5 x 20mm, Cl 8.8, Full Thd
51	829-1410	NUT,M10 x 1.5, Cl 10.9
52	399923A1	RUBBER STRIP	Trim, 203 mm; If Used
53	614-8016	BOLT,Hex, M8 x 1.25 x 16mm, Cl 8.8, Full Thd	If Used
34	895-11010	WASHER,11mm ID x 20mm OD x 2mm Thk	11 x 21 x 2 mm
50	895-11010	WASHER,11mm ID x 20mm OD x 2mm Thk	11 x 21 x 2 mm