| № | Номер | Название | Опции | Альт |
|---|
| A46352 | CRANKCASE | BLOCK ASSEMBLY - short (Includes stripped block, crankshaft and bearings, connecting rods and bearings, piston assembly, camshaft, oil pump and timing gears) Includes: Ref. 1 - 26 | |
| 1 | AR46351 | ENGINE, EXCHANGE | BLOCK ASSEMBLY - stripped (Remanufactured) | |
| 1 | AC46351 | CORE-ENGINE | RETURN NUMBER - stripped block (Use this number when returning block for credit) | |
| 1 | A46351 | BASIC BLOCK | BLOCK ASSEMBLY - stripped (New) Includes: Ref. 2 - 26 | |
| 2 | 217-433 | PLUG,Hex Soc, 1/4" - 18 NPTF | Rear oil gallery Hex Soc, 1/4"-18 NPTF | |
| 3 | G49070 | PLUG | - front oil gallery, 1/4 inch PT, drilled | |
| 4 | 221-1032 | DRAIN PLUG,Sq Soc, 3/8"-18 NPTF | PLUG - socket head, 3/8 inch PT | |
| A38534 | PLUG | - tachometer drive hole, 1-1/16 inch cup type (Used for shipping purposes only) (Not illustrated) | |
| 6 | 41-1016 | PLUG,Cup, 1" | - adapter hole, 1 inch cup type (25 mm) | |
| 7 | 41-1030 | PLUG,Cup, 1 7/8" | - camshaft hole, 1-7/8 inch expansion (48 mm) | |
| 8 | G49608 | RING | - dowel, head locating | |
| 9 | A153552 | ADAPTER | - oil filter | |
| 10 | REF | INSTRUCTION | BUSHING - camshaft (See Figure 42) | |
| 11 | A39047 | 12 PT SCREW | BOLT - cylinder head, 12 point head 3-1/2 inch | |
| 11 | A39048 | 12 PT SCREW | BOLT - cylinder head, 12 point head 5-1/8 inch | |
| 11 | A39049 | 12 PT SCREW | BOLT - cylinder head, 12 point head 5-5/8 inch | |
| 12 | A36902 | STUD | - cylinder head, lower 5-5/8 inch | |
| 13 | A51114 | NUT | - head studs, 1/2 NC and 3/8 inch NC | |
| 14 | A51271 | STUD | - cylinder head cover, 3-3/4 inch | |
| 15 | A39046 | WASHER,13.11mm ID x 22.23mm OD x 3.34mm Thk | - flat | |
| 16 | A38385 | CAP | - main bearing, rear | |
| 17 | G2128 | CAP | - main bearing, intermediate | |
| 18 | G2127 | CAP | - main bearing, center | |
| 19 | G2126 | CAP | - main bearing, front | |
| 20 | 26-872 | BOLT,Hex, 1/2" - 13 x 4-1/2", Gr 8 | - hex, 1/2 NC x 4-1/2 inch | |
| 21 | 26-882 | BOLT,Hex, 1/2" - 13 x 5-1/8", Gr 8 | - hex, 1/2 NC x 5-1/8 inch | |
| 22 | A37149 | TUBE | - oil filler and dipstick | |
| 23 | A37407 | TUBE | EXTENSION - oil filler tube | |
| 24 | A27342 | O-RING,1.109" ID x 1.387" OD x 0.139" | - tube, 1-3/8 inch (35 mm) | |
| 25 | 214-256 | HOSE CLAMP,#20, 0.81" - 1.75", Type F Worm | CLAMP - tube, 1-3/16 inch to 1-3/4 inch (30 to 44 mm) | |
| 26 | A38303 | BOLT | BOLT - front support | |
| 30 | A39936 | DIPSTICK | - engine oil level | |
| 31 | A137572 | DRIVE | ASSEMBLY - tachometer | |
| 32 | 41-1052 | PLUG,Cup, 3 1/4" | COVER - auxiliary drive opening, 3-1/4 inch cup type (83 mm) | |
| 33 | 221-662 | PLUG,Hex Hd, 1/4"-18 | - hex socket head, 1/4 inch PT | |
| 34 | A51793 | STUD | - engine to torque tube | |
| 35 | A162297 | SWITCH | - pressure | |
| 36 | 217-15 | ELBOW,45 Degree, 1/8"-27 NPTF, Fem x 1/8"-27 NPTF Male | - 45 degree, 1/8 inch PT | |
| 38 | A44815 | HEATER | ASSEMBLY - cylinder block, Includes: Ref. 39 | |
| 39 | A44814 | ELECTRIC CABLE | CORD ASSEMBLY - heater, 12 inch long | |
