| № | Номер | Название | Опции | Альт |
|---|
| S955796 | REDUCER | - swing (Before ordering parts see note on page 104 and 106), Includes: Ref. 1 - 16A | |
| 1 | 113-172 | BOLT,Hex, 5/16" - 18 x 1", Gr 8 | | |
| 2 | S105964 | CYLINDER END CAP | BEARING - ball | |
| 3 | A7409 | SNAP RING,#137, Ext | RING, snap, #137, Ext | |
| 4 | 221-1158 | FITTING | NIPPLE - 3/8" NPT x 1" long (Replaces 221-158) | |
| 5 | 221-85 | REDUCER,Hex, 3/8" x 1/8" NPT | BUSHING - reducer 3/8" NPT male x 1/8" NPT female | |
| 6 | L33264 | BREATHER | VENT - breather | |
| 7 | S216625 | TUBE,60" L | - oil breather | |
| 7 | S103261 | GASKET | | |
| 8 | S402194 | CAP | - bearing | |
| 9 | A17903 | SNAP RING,#156, Ext | Ring, Snap, #156, Ext | |
| 10 | S86268 | BALL BEARING,40mm ID x 80mm OD x 18mm W | BEARING - ball | |
| 11 | S612548 | GEAR | - cluster (Intermediate) | |
| 12 | S96077 | SEAL | - 10 CC bottle (Red) (Replaces gaskets) (Substitutes must not be used) | |
| 13 | S97539 | DOWEL | | |
| 14 | S98375 | BALL BEARING,40 mm ID x 90 mm OD x 23 mm | BEARING - ball | |
| 15 | A29183 | BALL BEARING,34.99mm ID x 71.99mm OD x 16.94mm W | BEARING - ball | |
| 16 | S613678 | CASE | - gear (Used on later units with smooth bore opening) | |
| | Before ordering refs 16, 17 or 18, check the type of gear case opening used for expansion plugs refs 17 and 18. Early gear cases used a lip and shoulder sealing arrangement in the opening. Later cases used a smooth bore arrangement. | | |
| 16a | S615133 | PACKAGE | GEAR CASE KIT - (Required for replacement of early gear Case S606331 with lip and shoulder sealing arrangement) | |
| | Before ordering refs 16, 17 or 18, check the type of gear case opening used for expansion plugs refs 17 and 18. Early gear cases used a lip and shoulder sealing arrangement in the opening. Later cases used a smooth bore arrangement. | | |
| S613678 | CASE | - gear | |
| S114620 | PLUG | - expansion | |
| S114619 | PLUG | - expansion | |
| 221-43 | PLUG | - pipe 3/8" NPT (Socket head) | |
| 17 | S114620 | PLUG | - expansion (Supersedes 41-58) (Used on later units with smooth bore openings) | |
| | Before ordering refs 16, 17 or 18, check the type of gear case opening used for expansion plugs refs 17 and 18. Early gear cases used a lip and shoulder sealing arrangement in the opening. Later cases used a smooth bore arrangement. | | |
| 41-58 | PLUG,Exp, 3 3/4" | - expansion (Used on early units with lip and shoulder sealing arrangement) | |
| | Before ordering refs 16, 17 or 18, check the type of gear case opening used for expansion plugs refs 17 and 18. Early gear cases used a lip and shoulder sealing arrangement in the opening. Later cases used a smooth bore arrangement. | | |
| 18 | S114619 | PLUG | - expansion (Supersedes 41-48) (Used on later units with smooth bore opening) | |
| | Before ordering refs 16, 17 or 18, check the type of gear case opening used for expansion plugs refs 17 and 18. Early gear cases used a lip and shoulder sealing arrangement in the opening. Later cases used a smooth bore arrangement. | | |
| 41-48 | PLUG,Exp, 3" | - expansion (Used on early units with lip and shoulder sealing arrangement) | |
| | Before ordering refs 16, 17 or 18, check the type of gear case opening used for expansion plugs refs 17 and 18. Early gear cases used a lip and shoulder sealing arrangement in the opening. Later cases used a smooth bore arrangement. | | |
| 19 | 221-1843 | PLUG | - pipe 3/8" NPT (Socket head) (Replaces 221-843) | |
| 20 | S612550 | SHAFT | PINION AND SHAFT - input | |
| 21 | 26-1052 | BOLT,Hex, 5/8" - 11 x 3-1/4", Gr 8 | - 5/8" NC x 3-1/4" gr 8 | |
| 22 | S235525 | SPACER | -, Serial Range: bearing-gear | |
| 23 | S612546 | GEAR | - drive | |
| 24 | S612551 | COVER | - gear case | |
| 25 | 26-628 | BOLT,Hex, 3/8" - 16 x 1-3/4", Gr 8 | - 3/8" NC x 1-3/4" gr 8 | |
| 26 | S238147 | SPHERICAL BEARING,40mm ID x 90mm OD x 23mm | BEARING, roller (Supersedes S98375) | |
| 27 | S214012 | CAP | - bearing | |
| 28 | S235526 | SPACER | | |
| 29 | S508461 | RETAINER | - roller bearing, Includes: Ref. 30 - 35 | |
| 30 | S112817 | ROLLER BEARING,75mm ID x 130mm OD x 41.28mm W | BEARING AND RACE ASSEMBLY | |
| 31 | S508460 | RETAINER | - oil seal | |
| 32 | S98415 | OIL SEAL | - oil | |
| 33 | S225232 | OIL SEAL | RING | |
| 34 | S612544 | SHAFT | AND GEAR - output | |
| 35 | S85842 | GASKET | | |
| 36 | 26-1432 | BOLT,Hex, 7/8" - 9 x 2", Gr 8 | - 7/8" NC x 2" gr 8 | |
| 37 | S92341 | WASHER | - flat 7/8" (Hardened steel) | |
| 38 | 26-1492 | BOLT,Hex, 7/8" - 9 x 5-3/4", Gr 8 | - 7/8" NC x 5-3/4" gr 8 | |
