| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | BOOM - backhoe (See Figure 74 or 78 for proper boom) | | | 2 | D26919 | SNAP RING,#200, Ext | Ring, Snap, #200, Ext | | | 3 | 195-2155 | WASHER,2 1/16" x 3" x .109" | - flat, steel (2-1/16") | | | 4 | R10830 | WASHER | - special, 1/16" thick | | | 5 | D37609 | PIN | - boom to dipper arm | | | D38904 | COLLAR ASSEMBLY - dipper extension, Includes: Ref. 6 - 9 | | | | 6 | NSS | NOT SOLD SEPARAT | COLLAR - dipper extension | | | 7 | D38479 | BUSHING | - collar, at crowd cylinder | | | 8 | D30756 | BUSHING,51.02mm ID x 63.5mm OD x 31.8mm L | - collar, at boom | | | 9 | D33024 | BUSHING,51.02mm ID x 63.5mm OD x 25.4mm L | - collar, at positioning pin | | | D38906 | | DIPPER ARM ASSEMBLY - extension, Includes: Ref. 10 - 13 | | | 10 | NSS | NOT SOLD SEPARAT | DIPPER ARM - extension | | | 11 | D34340 | BUSHING,44.68mm ID x 53.98mm OD x 25.4mm L | - dipper arm, at bucket cylinder | | | 12 | D30933 | BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L | - dipper arm, at bucket link | | | 13 | D37443 | BUSHING,44.68mm ID x 57.15mm OD x 50.8mm L | - dipper arm, at bucket | | | 14 | 132-48 | COTTER PIN,1/8" x 1" | Pin, Split (Cotter), 1/8" x 1" | | | 15 | A10123 | | PIN - clevis | | | 16 | D38902 | | PIN - dipper extension positioning | | | 17 | D43138 | SLEEVE | HOSE - to bucket cylinder (60" long) | | | 18 | D40647 | TUBE | - to bucket cylinder, rod end | | | 19 | D40655 | TUBE | - to bucket cylinder, closed end | | | 20 | 13-512 | BOLT,Hex, 5/16" - 18 x 3/4", Gr 5 | | | | 21 | R21385 | CLAMP | - hose | | | 22 | D39124 | | SPACER BAR - hose | | | 23 | 95-5 | WASHER,3/8" x 7/8" x .083" | - standard wrot (5/16") | | | 24 | 131-4 | LOCK NUT,5/16"-18, GB | NUT - hex., lock (5/16" - 18 NC) | | | 25 | D38648 | BLOCK | SPACER - tube clamp | | | 26 | 214-269 | HOSE CLAMP,#72, 4.06" - 5", Type F Worm | CLAMP - tube to cylinder | | | 27 | 218-5065 | HYD CONNECTOR,1-1/16" - 12 Male JIC x 7/8" - 14 Male ORB | CONNECTOR - male, straight, Includes: Ref. 28 | | | 28 | 237-6010 | O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro | SEAL - "O"ring | | | 29 | REF | INSTRUCTION | CYLINDER - hydraulic, bucket (See Figures 320 thru 326 for proper cylinder) | | | 30 | D25280 | SNAP RING,#175, Ext | Ring, Snap, #175, Ext | | | 31 | 195-2152 | WASHER,1 13/16" x 2 1/2" x .109" | - flat, steel (1-13/16") | | | 32 | D38907 | PIN,1.75" OD x 5 5/16 L | - bucket cylinder to dipper arm | | | 32a | 86977693 | NUT,Serrated, #8 - 32, Gr 5 | - special, 1/16" thick | | | 33 | D25279 | SNAP RING,M35, Int | RING - retaining | | | 34 | D39256 | AXLE PIN,38.1mm OD x 238.13mm L | PIN - bucket cylinder to bucket linkage | | | 35 | D39261 | WASHER | SPACER - link (Used with D37452 links only) | | | 36 | D28610 | WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk | - special, 1/8" thick | | | 37 | D25279 | SNAP RING,M35, Int | RING - retaining | | | 38 | D28610 | WASHER,38.5mm ID x 63.5mm OD x 2.66mm Thk | - special, 1/8" thick | | | 39 | D39256 | AXLE PIN,38.1mm OD x 238.13mm L | PIN - bucket linkage to dipper arm | | | 40 | D37445 | LINK | - bucket cylinder to dipper arm, R.H. (See Figure 74 or 48 for bushings) | | | 41 | D37444 | LINK | - bucket cylinder to dipper arm, L.H. (See Figure 74 or 78 for bushings) | | | 42 | D37452 | LINK | - bucket cylinder to bucket, Includes: Ref. 43 | | | 43 | D30933 | BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L | - link | | | 44 | D25280 | SNAP RING,#175, Ext | Ring, Snap, #175, Ext | | | 45 | 195-2156 | WASHER,1 13/16" x 2 3/4" x .109" | - flat, steel (1-13/16") | | | 46 | D38481 | PIN | - dipper, Serial Range: cylinder-dipper | | | 47 | 51200255 | SEALING WASHER,45.77mm ID x 62.18mm OD x 1.59mm Thk | - special, 1/16" thick | |
|
|