| № | Номер | Название | Опции | Альт |
|---|
| 38 | 13-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5, Full Thd | | | | 39 | 92-6 | LOCK WASHER,3/8" | | | | 40 | A172891 | FAN | PUSHER FAN - engine | | | | Do not use a suction fan as it may cause cooling system to overheat and damage hydraulics. | | | | 41 | A59296 | SET OF BELTS,0.69" W x 60.00" L | SET OF 2 BELTS , Fan and alternator drive, Use with 40 amp alternator 0.69" W x 60.00" L | | | | Description should read 40 and 45 amp alternator. | | | | 42 | L110293 | SET OF BELTS,0.69" W x 63.50" L | Fan and alternator drive, Use with 65 amp alternator, Used on W20C before PIN 9155766 0.69" W x 63.50" L | | | 43 | L71057 | SET OF BELTS,0.69" W x 62.00" L | Fan and alternator drive, Use with 65 amp alternator, Used on W20C P.I.N. 9155766 and after 0.69" W x 62.00" L | | | 44 | L112651 | V-BELT,0.50" W x 48.00" L | Compressor drive 0.50" W x 48.00" L | | | 45 | 217-153 | FITTING,5/8" Hose Barb x 1/2" Male NPTF | STEM FITTING - straight, if used | | | 46 | 221-1093 | REDUCER,Hex, 3/4" x 1/2" NPT | - 3/4" x 1/2" NPT, if used | | | 47 | 217-144 | 45 ELBOW,45 Degree Elbow, 5/8" Hose Barb x 1/2" Male NPTF | STEM FITTING - 45 degree, used with air conditioner only | | | 48 | A58745 | SPACER | - fan, used with air conditioner only | | | 49 | 13-624 | BOLT,Hex, 3/8" - 16 x 1-1/2", Gr 5 | - hex head, 3/8" - 16 NC x 1-1/2", used with A58745 spacer, item 48 | | | 50 | L60360 | HOSE | - 5/8" (16 mm) ID x 43" (1092 mm) long, used with air conditioner only, not shown | | | 51 | 51200320 | CLAMP | - hose, used with air conditioner only, not shown | | | 52 | 221-1211 | FITTING | NIPPLE - 3/4" NPT x 1-3/8", used with turbocharger | | | 53 | 221-1354 | CAP | REDUCER - 1" x 3/4" NPT, used with turbocharger | | | 54 | 217-161 | FITTING,1-1/4" Hose Barb x 1" Male NPTF | STEM FITTING - straight, used with turbocharger | | | 55 | L76902 | RADIATOR HOSE,1.25" ID x 34.50", SAE 20R1 Class B | Used with Air Conditioner and Turbocharger 1.25" ID x 34.50", SAE 20R1 Class B | | | 56 | 214-257 | HOSE CLAMP,#24, 1.06" - 2", Type F Worm | | | | 57 | L106383 | TUBE,31.75 mm OD x 127.6, 127 mm L | - engine oil cooler, used with turbocharger, 1-1/4" OD | | | 58 | L107382 | BRACKET | - tube, used with 1-1/4" OD tube, item 57 | | | 59 | R13931 | CLAMP | - 1-1/4" tube | | | 60 | 113-207 | BOLT,Hex, 3/8" - 16 x 1", Gr 5 | | | | 61 | 192-21 | LOCK WASHER,3/8" | WASHER, LOCK, 3/8" | | | 62 | 129-103 | NUT,Hex, 3/8" - 16, Gr 5 | NUT, 3/8"-16, G5 | | | 63 | A58640 | HOSE | - 1-1/4" (32 mm) x 2-13/32" (61 mm) long | | | 64 | REF | INSTRUCTION | HOSE - 1" (25 mm) ID x 48" (1219 mm) long, cut from L76517 hose, see below, used with air conditioner and turbocharger | | | 65 | L115190 | TUBE,1" OD x 5.02, 5" L | - engine oil cooler, used with turbocharger, 1" OD | | | 66 | L116385 | BRACKET | - tube, used with 1" OD tube, item 65 | | | 67 | R50045 | CLAMP | - 1" OD tube | | | 68 | 195-104 | WASHER,3/8" | - flat, , plated 3/8" | | | 69 | A64353 | HOSE | - special, reducer | | | 70 | 217-188 | FITTING,45 Degree Elbow, 1" Hose Barb x 3/4" Male NPTF | STEM FITTING - 45 degree, for 1" ID hose, item 64 | | | L36313 | GUARD ASSY. | KIT - antisandblast guard, Includes: Ref. 71 - 73 & 8-32690 instruction sheet | | | 71 | L123609 | GUARD | - antisandblast | | | 72 | 413-412 | BOLT,Hex, 1/4" - 20 x 3/4", Gr 5 | - hex, 1/4 NC x 3/4 inch | | | 73 | 131-132 | SPRING NUT,Tinn, U, 1/4"-20 | - U-type, 1/4 inch NC | | | L76517 | LARGE HOSE | HOSE - 1" (25 mm) ID x 104" (2642 mm) long | |
|
|