| № | Номер | Название | Опции | Альт |
|---|
| A22540 | BALANCER | & OIL PUMP ASSY. | |
| | NOTE:ANOTHER BALANCER USED(NOT A SUB) PART A57960 10/31/96 | | |
| 1 | A22546 | FILTER ASSY | COUNTERWEIGHT - driven (w/out spline) | |
| 2 | A22561 | | COUNTERWEIGHT - drive (Splined) | |
| 3 | 83-66 | SET SCREW,Hex Soc, 3/8"-16 x 3/8" | SCREW - set, 3/8 x 3/8" N.C., cup pt., sckt, hd. | |
| 4 | A22562 | X | GEAR - drive, counterweight | |
| 5 | A22563 | SHAFT | - stationary | |
| 6 | 221-841 | PLUG | - shaft end (1/2" P.T., sckt. hd.) | |
| 7 | A22558 | SHAFT | - drive, counterweight | |
| 8 | A22541 | | HOUSING ASSY. - balancer | |
| 9 | A8134 | PIN | - housing locating | |
| 10 | A22543 | SHAFT | - oil pump idler gear | |
| 11 | A22670 | SHIM,.005" Thk | Hsg. to cyl. block .005" Thk | |
| 12 | A22671 | SHIM,.010" Thk | Hsg. to cyl. block .010" Thk | |
| 13 | A8902 | ADJUSTMENT SCREW,7/8" x 1 5/8" | SCREW - adjusting, oil pump relief valve | |
| 14 | A27858 | NUT | - lock, adjusting screw | |
| 15 | A23598 | VALVE SPRING | SPRING - relief, oil pump | |
| 16 | A22566 | PLUNGER | - relief, oil pump | |
| 17 | 178-40 | SET SCREW,Hex Soc, 5/16"-18 x 3/8" | SCREW - set, 5/16 x 3/8" cone pt., sckt. hd. | |
| 18 | A22564 | GEAR | - drive, oil pump (Splined) | |
| 19 | A22555 | GEAR | ASSY. - idler, oil pump, w/bushing | |
| 20 | A22565 | COVER ASSY | COVER - oil pump | |
| 21 | 193-29 | LOCK WASHER,Int Tooth, 5/16" | WASHER, LOCK, Int Tooth, 5/16" | |
| 22 | 13-532 | BOLT,Hex, 5/16" - 18 x 2", Gr 5 | Cover Hex, 5/16"-18 x 2", G5 | |
| 23 | 13-514 | BOLT,Hex, 5/16" - 18 x 7/8", Gr 5 | Cover Hex, 5/16"-18 x 7/8", G5, Full Thd | |
| 24 | 222-23 | FITTING,1/2"-24 x 1/4" NPTF w/Nut | CONNECTOR ASSY. - (1/4" P.T.) | |
| 25 | 222-102 | SLEEVE,1/4" Tube | | |
| 26 | 87017024 | TUBE NUT,1/2"-24 | NUT (For 1/4" O.D. tube) | |
| 27 | 222-31 | HYD CONNECTOR,1"-18 x 1/2" NPTF w/Nut | CONNECTOR ASSY. (1/2" P.T.) | |
| 28 | 222-106 | SLEEVE,5/8" Tube | - (For ) 5/8" Tube | |
| 29 | 222-116 | TUBE NUT,1"-18 | NUT - (For 5/8" O.D. tube) | |
| 30 | A22590 | FILTER SCREEN | SCREEN - oil inlet | |
| 31 | A22595 | TUBE | - oil pump to filter (5/8" tube) | |
| 32 | 222-31 | HYD CONNECTOR,1"-18 x 1/2" NPTF w/Nut | CONNECTOR ASSY. - (1/2" P.T.) | |
| 33 | 222-106 | SLEEVE,5/8" Tube | - (For 5/8" O.D. tube) | |
| 34 | 222-116 | TUBE NUT,1"-18 | NUT - (For 5/8" O.D. tube) | |
| 35 | A57075 | PLUG | - oil gallery, cyl. block | |
| 36 | A27355 | O-RING,0.139" Thk x 1.17" ID, -217, Cl 5, 75 Duro | "O" RING - plug (1-3/16 x 1-7/16 x 1/8") | |
| 37 | A22593 | SET SCREW,1/4" - 18 x 7/8" | - set, plug | |
| 38 | 92-8 | LOCK WASHER,1/2" | | |
| 39 | 13-824 | BOLT,Hex, 1/2" - 13 x 1-1/2", Gr 5, Full Thd | Balancer to block Hex, 1/2"-13 x 1 1/2", G5, Full Thd | |
| 40 | 222-22 | FITTING,1/2"-24 x 1/8" NPTF w/Nut | CONNECTOR ASSY. - (1/8" P.T.) | |
| 41 | 222-102 | SLEEVE,1/4" Tube | | |
| 42 | 87017024 | TUBE NUT,1/2"-24 | NUT - (For 1/4" O.D. tube) | |
| 43 | A22596 | TUBE | - oil gallery to balancer shaft (1/4" tube) | |
| 44 | A20541 | CLIP | - oil tube | |
