| № | Номер | Название | Опции | Альт |
|---|
| A46037 | SHORT ENGINE | BLOCK ASSEMBLY - short (Includes stripped block, piston assembly, connecting rods and bearings, crankshaft and bearings, camshaft, oil pump and timing gears) (Order A46350), Includes: Ref. 1 - 24 | |
| 1 | A44702 | BLOCK | ASSEMBLY - stripped (Casting No. A136813) (Order A46351), Includes: Ref. 2 - 24 | |
| 2 | 217-433 | PLUG,Hex Soc, 1/4" - 18 NPTF | Oil gallery, Rear Hex Soc, 1/4"-18 NPTF | |
| 3 | G49070 | PLUG | - oil gallery, front, 1/4" PT drilled head | |
| 4 | 221-1032 | DRAIN PLUG,Sq Soc, 3/8"-18 NPTF | PLUG - 3/8" PT, socket head | |
| 6 | 41-1016 | PLUG,Cup, 1" | - adapter hole, 1" cup type (25.4 mm) | |
| 7 | A39241 | PLUG,Exp, 2.12" dia | - camshaft hole, 2-1/8" expansion (54 mm) | |
| 8 | G49608 | RING | - dowel, head locating | |
| 9 | A153552 | ADAPTER | - oil filler | |
| 10 | REF | INSTRUCTION | BUSHING - camshaft, See Figure 36 | |
| 11 | A39047 | 12 PT SCREW | BOLT - cylinder head, 1/2 x 3-1/2" NC, 12 point head | |
| 11 | A39048 | 12 PT SCREW | BOLT - cylinder head, 1/2 x 5-1/8" NC, 12 point head | |
| 11 | A39049 | 12 PT SCREW | BOLT - cylinder head, 1/2 x 5-5/8" NC, 12 point head | |
| 12 | A36902 | STUD | - cylinder head, 1/2" NC x 5-5/8" | |
| 13 | A51114 | NUT | - cylinder head studs, 1/2" NC and 3/8" NC | |
| 14 | A51271 | STUD | - cylinder head cover, 3/8" NC x 3-3/4" | |
| 15 | A39046 | WASHER,13.11mm ID x 22.23mm OD x 3.34mm Thk | - 1/2 x 7/8 x 1/8" (12.7 x 22.23 x 3.18 mm) | |
| 16 | A38385 | CAP | - main bearing, rear (Replaces A51057) | |
| 17 | G2128 | CAP | - main bearing, intermediate (Replaces A51055) | |
| 18 | G2127 | CAP | - main bearing, center (Replaces A51056) | |
| 19 | G2126 | CAP | - main bearing, front (Replaces A51054) | |
| 20 | 26-872 | BOLT,Hex, 1/2" - 13 x 4-1/2", Gr 8 | - bearing caps, 1/2 x 4-1/2" NC hex | |
| 21 | 26-882 | BOLT,Hex, 1/2" - 13 x 5-1/8", Gr 8 | - front bearing cap, 1/2 x 5-1/8" NC hex | |
| 22 | A37149 | TUBE | - oil filler and dipstick | |
| 23 | A38303 | BOLT | BOLT - front support, 5/8 x 3-3/16" NC hex | |
| 24 | A29268 | PLUG | COVER - auxiliary drive opening, 3-1/2" cup type (93.9 mm) | |
| 28 | A39936 | DIPSTICK | - oil level (Turn-tite type) | |
| 29 | 221-662 | PLUG,Hex Hd, 1/4"-18 | - drain, cylinder block, 1/4" PT square head | |
| 31 | A137572 | DRIVE | ASSEMBLY - tachometer | |
| 32 | A51793 | STUD | - 5/8" NF x 3-3/16" | |
| 36 | A44815 | HEATER | ASSEMBLY - block., Includes: Ref. 37 | |
| 37 | A44814 | ELECTRIC CABLE | CORD - heater, 12" long (304.8 mm) | |
