| № | Номер | Название | Опции | Альт |
|---|
| 1 | REF | INSTRUCTION | HEAD - cylinder, see Figure 2-44 for correct assembly and component parts | | | 2 | J927907 | VALVE COVER | COVER - valve, replaces J907734 | | | 3 | J905449 | SEAL,7.179mm W x 2090mm L | SEAL - valve cover | | | 4 | J910824 | O-RING,0.07" Thk x 0.364" ID, -12, Cl 5, 75 Duro | - cover bolt, replaces J901837 O-ring | | | 5 | J916585 | BOLT,Hex Flg, M8 x 1.25 | BOLT - hex flange cap, special, replaces J901838 bolt | | | 6 | J902468 | FILLER CAP,Male | CAP - oil filler | | | 7 | J902466 | SEAL,39.35mm ID x 59.35mm OD x 3mm Thk | RING - cap sealing | | | 8 | J928168 | GASKET | - cylinder head, standard, replaces J911342, J921216, J907682 and J921850 gasket | | | 8 | J928180 | GASKET | - cylinder head, 0.25 mm thicker, replaces J908119, J914305 and J921852 gasket | | | 8 | J928181 | GASKET | - cylinder head, 0.50 mm thicker, replaces J908210, J914306 and J921853 gasket | | | 9 | J907861 | LIFTING EYE | BRACKET - lifting, front | | | 10 | J906440 | LIFTING EYE | BRACKET - lifting, rear | | | 11 | 614-12025 | BOLT,Hex, M12 x 1.75 x 25mm, Cl 8.8, Full Thd | - hex, full threads, 12 - 1.75 x 25 mm, Front lifting bracket to cylinder head | | | 11a | 854-12025 | BOLT,Hvy Hex, M12 x 25mm, Cl 10.9 | - heavy hex flange, 12 - 1.75 x 25 mm, class 10.9, rear lifting bracket to cylinder head | | | 12 | J920497 | ELBOW | CONNECTOR - 90 degree, breather vent, replaces J906794 connector | | | 13 | 238-5115 | O-RING,0.103" Thk x 0.674" ID, -115, Cl 5, 75 Duro | | | | 14 | J918610 | HOSE,19.05 mm ID x 51.00 mm | Replaces J915040 Hose 19.05 mm ID x 51.00 mm | | | 15 | 214-1318 | HOSE CLAMP,#18, 1 1/8", Spring | CLAMP, HOSE, , Replaces 214-113 #18, 1 1/8", Spring | | | 16 | J909669 | TUBE,15.9-19 mm OD x 642.7 mm L | - breather | | | 17 | J907741 | CLAMP,15.88mm ID, 9.52mm Bolt Hole, P Type | P-style M15.88, M9.52 Bolt Hole | | | 18 | J912072 | SELF-TAP SCREW | SCREW - self tapping, hex washer head, special, 8 - 1.25 x 15 mm, replaces J902735 screw | | | 19 | A77538 | CLIP | CLAMP - P-style | | | 20 | 854-12025 | BOLT,Hvy Hex, M12 x 25mm, Cl 10.9 | - heavy hex flange, 12 - 1.75 x 25 mm, class 10.9 | | | 21 | J918616 | TUBE,680.00 mm | Replaces J907739 and A77717 Hose 680.00 mm | | | 22 | J918163 | CLIP | CLAMP - spring type, replaces 214-109 clamp | | | 23 | J909670 | CLIP | - retaining, uses Rer. 7 access cover bolt shown on Figure 2-92 | | | 24 | J908762 | VENTILATION PIPE,6.35 mm OD x 240.7 mm L | TUBE - vent, 90 degree, if used | | | 25 | J908763 | TEE | - adapter, if used | | | 26 | J912802 | TUBE,6.35 mm OD x 127.9 mm L | - vent, air, no longer available, order (1) J918167 tube, Ref. 29 & (2) 222-42 elbow, Ref. 28 | | | 27 | A77535 | ELBOW UNION | ELBOW - 90 degree, adapter, used with J908762 and J912802 tubes, Ref. 24 & 26, no longer available, for service order Ref. 28 & 29 | | | 28 | 222-42 | ELBOW,90 Degree, 1/2"-24 Fem x 1/8"-27 NPTF | - 90 degree, compression, 1/4 tube OD x 1/8 inch PT, two used before Engine SN 44808257, one used Engine SN 44808257 and after | | | 29 | J918167 | TUBE,6.35 mm OD x 117.5 mm L | - vent, air, prior to Engine SN 44808257 | | | 30 | J911901 | VALVE, CHECK | VALVE - check | | | 31 | J911925 | COUPLING | - hose | | | 32 | J924589 | TUBE,6.35 mm OD x 112.6 mm L | - vent, air, Engine SN 44808257 and after, Includes: Ref. 33 | | | 33 | 222-153 | SLEEVE,1/4" Tube | | | | 34 | 222-22 | FITTING,1/2"-24 x 1/8" NPTF w/Nut | ADAPTER - compression, 1/4 tube OD x 1/8 inch PT, tube to thermostat housing, Engine SN 44804257 and after | |
|
|