| № | Номер | Название | Опции | Альт |
|---|
| 1 | G109140 | CYLINDER | ASSEMBLY - stabilizer, right-hand, 4 inch (102 mm) ID x 21-3/4 inch (553 mm) stroke, interchangeable with G103252 cylinder, Includes: Ref. 2 - 21 | | | 1 | G109139 | CYLINDER | ASSEMBLY - stabilizer, left-hand, 4 inch (102 mm) ID x 21-3/4 inch (553 mm) stroke, interchangeable with G103253 cylinder, Includes: Ref. 2 - 21 | | | 2 | G109142 | TUBE,101.473 mm ID x 781.8 mm L | ASSEMBLY - cylinder, right-hand, Includes: Ref. 3 | | | 2 | G109141 | TUBE,101.473 mm ID x 781.8 mm L | ASSEMBLY - cylinder, left-hand, Includes: Ref. 3 | | | 3 | D32865 | BUSHING,38.33mm ID x 47.63mm OD x 22.35mm L | - G109141 or G109142 tube | | | G107524 | GLAND | ASSEMBLY - cylinder, Includes: Ref. 4 - 12 | | | 4 | NSS | NOT SOLD SEPARAT | GLAND - cylinder | | | 5 | NSS | NOT SOLD SEPARAT | RING - retaining, bushing | | | 6 | G102569 | PLUG | - nylon, thread locking, gland, if used | | | 7 | D95144 | WIPER SEAL,50.77mm ID x 63.52mm OD x 7.92mm Thk | Wiper - piston rod, outer | | | | Part of Seal Kit, P/N G109423 | | | | 8 | G101533 | WEAR RING,Split, 50.8mm ID x 53.87mm OD x 25.15mm Thk | BUSHING - center | | | | Part of Seal Kit, P/N G109423 | | | | 9 | G107923 | SEAL,50.77mm ID x 63.63mm OD x 10.69mm Thk | - U-cup, with O-ring, piston rod, wide | | | | Part of Seal Kit, P/N G109423 | | | | 9 | G100778 | SEAL | - U-cup, piston rod, service option - severe heat or cold | | | 10 | G107997 | SEAL,50.37mm ID x 63.68mm OD x 3.05mm Thk | - buffer, grooved, piston rod, narrow | | | | Part of Seal Kit, P/N G109423 | | | | 11 | A27507 | O-RING,0.139" Thk x 3.984" ID, -242, Cl 5, 75 Duro | - gland | | | | Part of Seal Kit, P/N G109423 | | | | 12 | G32176 | BACK-UP RING,101.22mm ID x 107.32mm OD x 1.4mm Thk | Gland O-Ring | | | | Part of Seal Kit, P/N G109423 | | | | 12a | 276-2446 | SELF-TAP SCREW,Hex Hd, #8 x 3/8" | SCREW - self-tapping, hex hd, No. 8 NC x 3/8 ", If used | | | 13 | G103264 | ROD | ASSEMBLY - piston, 2 inch (51 mm) diameter, with bushing, no longer used, order G107916 rod, Includes: Ref. 14 | | | 14 | D32865 | BUSHING,38.33mm ID x 47.63mm OD x 22.35mm L | - piston rod eye | | | 14a | G107916 | ROD | ASSEMBLY - piston, 2 inch (51 mm) diameter, without bushings | | | 15 | G100438 | PISTON,100.89mm Bore, 32.8mm Rod, 50.7mm W | - cylinder | | | 16 | G102285 | SEAL,Locking, 98.55mm ID x 102.97mm OD x 6.96mm Thk | - piston | | | | Part of Seal Kit, P/N G109423 | | | | 17 | G100440 | RING,Square, 5.28mm Thk x 88.01mm ID | - backup, piston seal | | | | Part of Seal Kit, P/N G109423 | | | | 18 | G100448 | RING,101.6mm OD, Ext | - wear, piston | | | | Part of Seal Kit, P/N G109423 | | | | 19 | 28-2040 | BOLT,Hex, 1-1/4" - 12 x 2-1/2", Gr 8 | - Hex, 1-1/4"-12 NF x 2-1/2", G8, used with G103264 rod, no longer used, order 28-2044 bolt and G105980 washer | | | 19a | 28-2044 | BOLT,Hex, 1-1/4" - 12 x 2-3/4", Gr 8 | - Hex, 1-1/4"-12 NF x 2-3/4", G8, used with G107916 rod | | | 20 | G32351 | WASHER | - 1-11/32 ID x 1/8 inch thick, hardened, used with G103264 rod, no longer used, order G105980 washer and 28-2044 bolt | | | 20a | G105980 | WASHER | - 1-7/16 inch ID x 3/16 inch thick, hardened, used with G107916 rod | | | 21 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING - grease, straight, 1/8 PT x 21/32 inch | | | G109423 | GASKET KIT | KIT - seal, Includes: Ref. 7, 8, 9, 10, 11,12, 16, 17, and 18 | |
|
|