(09-616) - CAB HEATER

№	Номер	Название	Опции
1	221-89	REDUCER,Hex, 1/2" x 3/8" NPT	1/2" x 3/8" NPT, replaces existing plugs, if used
2	221-413	ELBOW,90 Degree, 3/8"-18, NPT	STREET ELBOW, 90 degree, 3/8" NPT, left hand side of engine, if used
3	L17985	FITTING,3/8" - 18 NPT	NIPPLE, 3/8" NPT, left hand side of engine
4	A16764	VALVE	SHUTOFF VALVE right hand side of engine, at water pump
5	D136068	LARGE HOSE,0.63" ID, SAE 20R3 Class D1	HEATER HOSE -124" (3150 mm) long, Cut to required length from A42610 bulk hose, See below, LH, Mounts to heater temperature control valve 0.63" ID, SAE 20R3 Class D1
		P/N S104739 tube and P/N R54969 hose Refs. 30 and 31 are used in production with P/N D136068, 124" hose Ref. 5 for ease of pod assembly; however, Refs. 30 and 31 are not required for service if Ref. 5 hose is cut to 146" instead of 124".
6	D132977	LARGE HOSE,0.63" ID, SAE 20R3 Class D1	HEATER HOSE - RH (116-1/8", 2950 mm long), Cut to required length from A42610 bulk hose, See below 0.63" ID, SAE 20R3 Class D1
7	214-253	HOSE CLAMP,#10, 0.56" - 1.06", Type F Worm	CLAMP heater hoses
8	D132982	PADDLE,26.87mm ID x 400mm L	SLEEVE hose guard
9	R14668	CLAMP	left hand hose, uses existing mounting hardware
10	D126742	BRACKET	hose clamp support, mounts to engine with existing hardware, if used
11	R14668	CLAMP	hose, if used
12	113-206	BOLT,Hex, 3/8" - 16 x 3/4", Gr 5, Full Thd
13	195-525	WASHER,3/8", SAE	flat, 3/8", plated
14	192-21	LOCK WASHER,3/8"	WASHER, LOCK, 3/8"
15	129-103	NUT,Hex, 3/8" - 16, Gr 5	NUT, 3/8"-16, G5
16	D39696	CLAMP,25.40mm - 13.49mm Bolt, CTD	hose
17	D132978	CLAMP	hose, at right hand console
18	R52483	VALVE	temperature control, heater, see Figure 09-604 for mounting
19	R54968	HEATER HOSE,15.50 mm ID x 205.00 mm	- Cut to required length from bulk hose, See below, Heater temperature control valve to heater inlet tube 15.50 mm ID x 205.00 mm
20	214-254	HOSE CLAMP,#12, 0.69" - 1.25", Type F Worm	CLAMP worm screw type, hose
21	R52504	HEATER TUBE,15.88 mm OD	TUBE heater inlet
22	R52505	HEATER TUBE,15.88 mm OD	TUBE heater outlet
23	R52657	CLAMP	plastic, tube, mounts on stud on ROPS post
24	131-206	NUT,3/8"-16	NUT hex, self-locking, 3/8" - 16 NC
25	R54967	HEATER HOSE,15.50 mm ID x 70.00 mm	- Cut to required length from bulk hose 97252C1, See below, Heater core to tubes 15.50 mm ID x 70.00 mm
	97252C1	HOSE,15.875 mm ID x 15240 mm Bulk
	A42610	LARGE HOSE	HOSE bulk, 5/8", 16 mm, ID x 1", 25 mm, O.D. x 50 ft, 1524 cm, long
26	214-254	HOSE CLAMP,#12, 0.69" - 1.25", Type F Worm	CLAMP worm screw type, hose
27	F45415	BODY	CORE heater, mounts to cab frame
28	187-1310	SELF-TAP SCREW,Hex Washer, 1/4" - 20 x 3/4"	SCREW hex flange head, self-tapping, 1/4" - 20 NC x 3/4", plated
29	F45457	INSULATOR	SEAL heater and air conditioner, foam, adhesive back
30	S104739	TUBE,0.625" OD x 3" L	5/8", 16 mm, O.D. x 3", 76 mm, long, used in production, not required for service
		P/N S104739 tube and P/N R54969 hose Refs. 30 and 31 are used in production with P/N D136068, 124" hose Ref. 5 for ease of pod assembly; however, Refs. 30 and 31 are not required for service if Ref. 5 hose is cut to 146" instead of 124".
31	R54969	HEATER HOSE,15.50mm ID x 292mm L	Cut to Required Length from Bulk Hose, Used in Production, Not Required for Service 15.50 mm ID x 292.00 mm
		P/N S104739 tube and P/N R54969 hose Refs. 30 and 31 are used in production with P/N D136068, 124" hose Ref. 5 for ease of pod assembly; however, Refs. 30 and 31 are not required for service if Ref. 5 hose is cut to 146" instead of 124".
32	221-1414	ELBOW,90 Degree, 1/2"-14, NPT	street, 90 degree, 1/2" NPT, galvanized, if used
33	221-1089	REDUCER,Hex, 1/2" x 3/8" NPT	1/2" x 3/8" NPT, plated, if used
	R54970	HEATER HOSE,15.88mm ID x 15240mm Bulk	15.88 mm ID x 15240.0 mm