| № | Номер | Название | Опции | Альт |
|---|
| 1 | D148051 | ROD | FRAME operators compartment | | | | loader models only, has a 7/16 inch mounting hole on front of lower channel for front drive axle control lever mounting, Ref. 5 and 12 on Figure 6-36, frame no longer available, 2WD units order 102452A1 frame, Ref. 1A below; 4WD units order 102452A1 frame, Ref. 1A below, 102446A1 bracket, Ref. 21A on Figure 7-012, and Ref. 24,25,27,28, and 30-33 on Fig. 6-36 | | | | 1a | 102452A1 | ROD ASSY. | FRAME operators compartment, loader models only, has 1/2 inch mounting hole on front of lower channel for front drive axle control lever mounting, Ref. 24 and 25 on Figure 6-36 | | | 2 | D146159 | ROD ASSY. | FRAME operators compartment | | | | loader integral backhoe models, has a 7/16 inch mounting hole on front of lower channel for front drive axle control lever mounting, Ref. 5 and 12 on Fig. 6-36, frame no longer available, 2WD units order 102451A1 frame, Ref. 2A below; 4WD units order 102451A1 frame, Ref. 2A below, 102446A1 bracket, Ref. 21A on Fig. 7-13, and Ref. 24,25,27,28, and 30-33 on Fig. 6-36 | | | | 2a | 117920A1 | BRACKET | FRAME operators compartment, loader integral backhoe models, has 1/2 inch mounting hole on front of lower channel for front drive axle control lever mounting, Ref. 24 and 25 on Figure 6-36, replaces 102451A1 frame | | | 3 | D139180 | COVER | PLATE access, in firewall | | | 4 | 281-14812 | SELF-TAP SCREW,Hex Washer, 5/16" - 18 x 3/4" | SCREW self-tapping, hex washer head, 5/16 NC x 3/4 inch | | | 5 | 131-97 | SPRING NUT,Tinn, U, 5/16"-18 | U-type, 5/16 inch NC | | | 6 | 426-1060 | BOLT,Hex, 5/8" - 11 x 3-3/4", Gr 8 | hex, 5/8 NC x 3-3/4 inch | | | 7 | D90873 | WASHER | flat, 1/4 inch, 6 mm, thick | | | 8 | D89007 | WASHER | flat, 5/8 x 2-3/4 inch, special | | | 9 | D138565 | SHOCK ABSORBER | INSULATOR frame mounting, front | | | 10 | 429-1010 | NUT,5/8"-11, G8 | | | | 11 | 426-1064 | BOLT,Hex, 5/8" - 11 x 4", Gr 8 | hex, 5/8 NC x 4 inch, grade 8 | | | 12 | D138565 | SHOCK ABSORBER | INSULATOR frame mounting, front | | | 13 | D89007 | WASHER | flat, 5/8 x 2-3/4 inch, special | | | 14 | 429-1010 | NUT,5/8"-11, G8 | | | | 15 | D147377 | BOLT | hex, 5/8 NC x 5 inch, special thread length | | | 16 | A141451 | SHOCK ABSORBER | INSULATOR frame mount, rear, rubber | | | 17 | D89007 | WASHER | flat, 5/8 x 2-3/4 inch, special, used with Ref. 16 insulator on left-hand side of frame | | | 18 | 429-1010 | NUT,5/8"-11, G8 | Used with Ref. 17 washer 5/8"-11, G8 | | | 18a | D148525 | BLOCK | tapped, 2-3/4 inch square, used with Ref. 16 insulator on right-hand side of frame | | | 19 | D141960 | PLATFORM ASSY. | FRAME rear, used with Ref. 1, D148051 frame, cab or canopy loader only models with rear counterweight | | | 20 | 281-14812 | SELF-TAP SCREW,Hex Washer, 5/16" - 18 x 3/4" | SCREW self-tapping, hex washer head, 5/16 NC x 3/4 inch, if used | | | 21 | D132290 | SEAL | firewall, used on models without cab | | | 22 | D150055 | STRIP | SEAL, 300 inch, 7620 mm, long, cut from L35819, firewall and chassis, used on models with cab | | | L35819 | RUBBER SEAL | SEAL, 50 foot long, bulk | | | 23 | D144671 | SUPPORT | BRACKET frame mount, right-hand front | | | 24 | D140555 | SUPPORT | BRACKET frame mount, left-hand front | | | 25 | 426-820 | BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 8 | | | | 26 | 80679 | LOCK WASHER,1/20.507 CST ZND | WASHER, LOCK, 1/2" | | | 27 | D140261 | PLATE ASSY. | PLATE boom latch hole, used on models without backhoe, with rear counterweight | | | 28 | 492-11031 | LOCK WASHER,5/16" | WASHER, LOCK, 5/16" | | | 29 | 425-105 | NUT,5/16"-18, G5 | - hex, 5/16 inch NC | | | 30 | 281-14812 | SELF-TAP SCREW,Hex Washer, 5/16" - 18 x 3/4" | SCREW self-tapping, hex washer head, 5/16 NC x 3/4 inch | | | 31 | D143659 | PLATE | steel | | | 32 | 440-13112 | SCREW,Cross Pan Hd, 5/16"-18 x 3/4" | machine, pan head Phillps, 5/16 NC x 3/4 inch | | | 33 | D143242 | PLUG,7.1mm Dia Shank x 25.4mm OD Head x 23.1mm L | RETAINER push-in, plastic | | | 34 | 102439A1 | SPACER | 13/32 x 1/2 x 3/8 inch, seal to front instrument panel, replaces D35217 spacer | | | 35 | 131-874 | NUT,Ret, J, 5/16"-18 | J-type, 5/16 inch NC, if used | | | 36 | D35424 | LINING | SEAL trim, edge, 16 inch, cut to required length from bulk seal F42827, see below | | | 37 | 413-516 | BOLT,Hex, 5/16" - 18 x 1", Gr 5 | hex, 5/16 NC x 1 inch | | | 38 | 492-11031 | LOCK WASHER,5/16" | WASHER, LOCK, 5/16" | | | 39 | 495-11034 | WASHER,5/16", SAE | 5/16" SAE (flat, 11/32 x 11/16 x 1/16") | | | 40 | 281-14812 | SELF-TAP SCREW,Hex Washer, 5/16" - 18 x 3/4" | SCREW self-tapping, hex washer head, 5/16 NC x 3/4 inch, replaces D141589 screw, if used | | | 40a | 112865A1 | SCREW | pointed, self-aligning, if used | | | F42827 | TRIM,2946.4mm L | SEAL trim, edge, 116 inch | |
|
|