| № | Номер | Название | Опции | Альт |
|---|
| 1 | D150716 | CHASSIS | loader models, replaces D147935, Includes: Ref. 2 through 5A | | | 2 | D129061 | BUSHING,44.68mm ID x 57.15mm OD x 52.3mm L | loader frame pivot | | | 3 | D127542 | BUSHING,50.2mm ID x 60mm OD x 30mm L | front axle pivot | | | 4 | 444789 | PLUG,Sq Soc, 1/2"-14 NPTF | square socket, 1/2 inch PT | | | 5 | 218-5161 | PLUG,Hex Hd, 1 5/8"-12 ORB | hex, 1-5/8-12 inch O-ring boss, Includes: Ref. 5A | | | 5a | 237-6020 | O-RING,0.118" Thk x 1.475" ID, -920, Cl 6, 90 Duro | 20-1, 90 Duro, 1.475" ID x .118" Thk | | | 6 | D147688 | CHASSIS | loader with integral backhoe models, uses Ref. 10, D135555, and Ref. 11, D135556, bushings and four Ref. 21, D127974, grease seals, prior to P.I.N. JJG0163952, see Note A | | | 6a | D150715 | FRAME | CHASSIS loader with integral backhoe, uses Ref. 10A, D150118, and 11A, D150119, bushings without grease seals, P.I.N. JJG0163952 through JJG0169930, see Note A, no longer available, order 111607A1 chassis | | | 6b | D151192 | FRAME | CHASSIS loader with integral backhoe, not shown, uses Ref. 10A, D150118, and 11A, D150119, bushings without grease seals, P.I.N. JJG0169931 through JJG0171614, see Note A, no longer available, order 111607A1 chassis | | | 6c | 111607A1 | CHASSIS | loader with integral backhoe, not shown, uses Ref. 10A, D150118, and 11A, D150119, bushings without grease seals, P.I.N. JJG0171615 and after, if used, see Note B, Includes: Ref. 7 through 14 | | | 7 | D129061 | BUSHING,44.68mm ID x 57.15mm OD x 52.3mm L | loader frame pivot | | | 8 | D127542 | BUSHING,50.2mm ID x 60mm OD x 30mm L | front axle pivot | | | 9 | 218-5161 | PLUG,Hex Hd, 1 5/8"-12 ORB | hex, 1-5/8-12 inch O-ring boss, Includes: Ref. 9A | | | 9a | 237-6020 | O-RING,0.118" Thk x 1.475" ID, -920, Cl 6, 90 Duro | 20-1, 90 Duro, 1.475" ID x .118" Thk | | | 10 | D135555 | BUSHING,70.19mm ID x 90mm OD x 32mm L | upper, backhoe frame, swing tower mounting, has grease seal retaining groves, used with two Ref. 21, D127974 grease seals, D147688 chassis | | | 10a | D150118 | BUSHING | upper, backhoe frame, swing tower mounting, D150715, D151192, and 111607A1 chassis | | | 11 | D135556 | BUSHING,70.19mm ID x 90mm OD x 38mm L | lower, backhoe frame, swing tower mounting has grease seal retaining groves, used with two Ref. 21, D127974 grease seals, D147688 chassis | | | 11a | D150119 | BUSHING | lower, backhoe frame, swing tower mounting, D150715, D151192, and 111607A1 chassis | | | 12 | D144112 | SPACER | 93 mm x 135 mm x 6 mm, bearing, Serial Range: welds-frame | | | 13 | D37495 | BUSHING,44.76mm ID x 57.15mm OD x 31.75mm L | lower, side, backhoe frame, at stabilizer leg mounting | | | 14 | 221-844 | PLUG,Hex Soc, 1/2"-14 | square socket, 1/2 inch PT, replaces 444789 | | | 15 | A51390 | CAP | diesel fuel reservoir, left-hand, order D93757 | | | 16 | D93981 | FILLER CAP | CAP hydraulic oil reservoir, right-hand | | | 17 | 219-36 | LUBE NIPPLE,45 Degree Elbow, 1/8" - 27 NPTF | FITTING grease, 45 degree, 1/8 PT x 7/8 inch, loader frame pivot | | | 18 | D63875 | PLUG | GAUGE sight, hydraulic oil level | | | 18 | D63875 | PLUG | GAUGE sight, hydraulic oil level | | | 19 | 41-1020 | PLUG,Cup, 1 1/4" | cup, 1-1/4 inch diameter | | | 20 | N8796 | PLUG | BREATHER hydraulic oil fill tube | | | 21 | D127974 | SEAL,67.46mm ID x 80.18mm OD x 3.56mm Thk | backhoe frame, at swing tower mounting, D147688 chassis | |
|
|