| № | Номер | Название | Опции | Альт |
|---|
| N8367 | STARTING MOTOR | STARTER ASSEMBLY - 2.1 litre engine, M002T56471, Includes: P/N N8048 and Refs. 1-53 | |
| N8048 | SWITCH | ASSEMBLY - solenoid, Includes: Refs. 1-13 | |
| 1 | NSS | NOT SOLD SEPARAT | CASE ASSEMBLY - solenoid | |
| 2 | NSS | NOT SOLD SEPARAT | SPRING - plunger | |
| 3 | NSS | NOT SOLD SEPARAT | PLUNGER - solenoid | |
| 4 | NSS | NOT SOLD SEPARAT | SCREW - terminal | |
| 5 | NSS | NOT SOLD SEPARAT | WASHER - lock | |
| 6 | NSS | NOT SOLD SEPARAT | WASHER - flat | |
| 7 | NSS | NOT SOLD SEPARAT | NUT - hex, terminal, outer | |
| 8 | NSS | NOT SOLD SEPARAT | WASHER - lock | |
| 9 | NSS | NOT SOLD SEPARAT | NUT - hex, terminal inner | |
| 10 | NSS | NOT SOLD SEPARAT | WASHER - flat | |
| 13 | N8376 | SET OF WASHERS | SEAL | |
| N8368 | BRACKET | HOUSING ASSEMBLY - front, Includes: Refs. 14-16 | |
| 14 | NSS | NOT SOLD SEPARAT | HOUSING - front | |
| 15 | N8061 | OIL SEAL | SEAL - oil, front housing | |
| 16 | NSS | NOT SOLD SEPARAT | BEARING - front housing | |
| N8046 | SPRING KIT | - lever, Includes: Refs.17 & 18 | |
| 17 | NSS | NOT SOLD SEPARAT | SPRING - inner | |
| 18 | NSS | NOT SOLD SEPARAT | SPRING - outer | |
| N8045 | LEVER ASSY. | LEVER ASSEMBLY - drive shift, Includes: Ref. 21-23 | |
| 21 | NSS | NOT SOLD SEPARAT | LEVER - drive shift | |
| 22 | NSS | NOT SOLD SEPARAT | STOP | |
| 23 | NSS | NOT SOLD SEPARAT | PIN | |
| N8378 | PINION | GEAR ASSEMBLY, Includes: Refs. 24 & 25 | |
| | N8378 Pinion Gear Assy includes the Pinion Spring (N S S) | | |
| 24 | NSS | NOT SOLD SEPARAT | PINION GEAR | |
| N8383 | KIT | STOP KIT - pinion, includes a stop ring, not shown or used | |
| | (11 tooth) | | |
| 25 | NSS | NOT SOLD SEPARAT | SNAP RING - pinion retaining | |
| 26 | N8377 | SHAFT | DRIVE SHAFT ASSEMBLY | |
| 27 | N8379 | GEAR | - reduction | |
| 28 | N8369 | BRACKET | HOUSING - intermediate | |
| N8380 | KIT | SHAFT COVER SET, Includes: Refs. 29-35 | |
| 29 | NSS | NOT SOLD SEPARAT | SHIM - gear adjustment | |
| 30 | NSS | NOT SOLD SEPARAT | PLATE - thrust | |
| 31 | NSS | NOT SOLD SEPARAT | THRUST WASHER | |
| 32 | NSS | NOT SOLD SEPARAT | RETAINING RING | |
| 33 | NSS | NOT SOLD SEPARAT | PLATE - cover | |
| 34 | NSS | NOT SOLD SEPARAT | SCREW | |
| 35 | NSS | NOT SOLD SEPARAT | WASHER - lock, if used | |
| N8375 | SET SCREW | SCREW-SET - starter, Includes: 36-41 | |
| 36 | NSS | NOT SOLD SEPARAT | SCREW SET - solenoid | |
| 37 | NSS | NOT SOLD SEPARAT | WASHER SET - flat solenoid | |
| 38 | NSS | NOT SOLD SEPARAT | BOLT SET - hex head, intermediate cover | |
| 39 | NSS | NOT SOLD SEPARAT | SCREW SET - rear cover | |
| 41 | NSS | NOT SOLD SEPARAT | WASHER SET - flat, rear cover | |
| 42 | N8060 | SEALING RING | - rubber | |
| 43 | N8371 | GASKET | - cover, Includes: P/N N8372 and Refs.44 & 45 | |
| N8372 | HOUSING | COIL ASSEMBLY - field | |
| 44 | NSS | NOT SOLD SEPARAT | COIL AND HOUSING | |
| 45 | NSS | NOT SOLD SEPARAT | BRUSH - field | |
| N8370 | ARMATURE | ASSEMBLY, Includes: Refs. 46-48 | |
| 46 | NSS | NOT SOLD SEPARAT | ARMATURE | |
| 47 | N8381 | BEARING | - splined end | |
| 48 | N8382 | BEARING | - closed eng | |
| N8373 | PLATE ASSY. | BRUSH HOLDER ASSEMBLY, Includes: Refs. 49 & 50 | |
| 49 | NSS | NOT SOLD SEPARAT | BRUSH HOLDER | |
| 50 | N8384 | SPRING | - brush retaining | |
| 51 | N8374 | BRACKET | COVER - rear | |
| 53 | N8050 | BOLT | BOLT SET - rear cover | |
