| № | Номер | Название | Опции | Альт |
|---|
| 1 | 131127A2 | EVAPORATOR | CORE ASSEMBLY - evaporator, replaces 131127A1 core, Includes: Ref. 2 - 4 | | | 2 | 1990756C2 | VALVE | - expansion, replaces 1990756C2 valve | | | 3 | 128485A1 | O-RING,1.78mm Thk x 14mm ID, 70 Duro | - 9/16 ID x 1/16 inch wide | | | 4 | 128484A1 | O-RING,0.07" Thk x 0.426" ID, -13, Cl 5, 70 Duro | - 7/16 ID x 1/16 inch wide | | | 5 | 181980A1 | SEALING STRIP | SEAL - adhesive-backed, 19 (3/4) x 19 (3/4) x 680 mm (26-3/4 inch) long, apply seal to top of evaporator core on models with heat and air conditioning | | | 6 | 83822C1 | TAPE | - 610 mm (24 inch) long, cut from 1954475C1 bulk tape, insulation, expansion valve and hoses at expansion valve | | | 7 | 135933A1 | HOSE | - suction, attaches to Ref. 1 on Figure 9-126, models with heater and air conditioning hoses along right-hand side of chassis, if used, see Ref 29, Includes: Ref. 8 - 12 | | | 8 | 128485A1 | O-RING,1.78mm Thk x 14mm ID, 70 Duro | - 9/16 ID x 1/16 inch wide, hose end | | | 9 | 128483A1 | O-RING,1.78mm Thk x 7.65mm ID, 70 Duro | - 5/16 ID x 1/16 inch wide, hose valve core | | | 10 | 1250594C1 | CORE | VALVE - core, low pressure switch | | | 11 | 1250594C1 | CORE | VALVE - core, low side service port | | | 12 | 122553A1 | CAP | - sealing | | | 13 | 122579A1 | SWITCH, A/C LOW PRES | SWITCH - low pressure | | | 14 | 1340287C1 | SWITCH | - temperature control, air conditioning | | | 15 | 124727A1 | HOSE | - 3200 mm (126 inch) long, pressure, liquid line, attaches to Ref. 24 hose on Figure 9-126, Includes: Ref. 16 | | | 16 | 128483A1 | O-RING,1.78mm Thk x 7.65mm ID, 70 Duro | - 5/16 ID x 1/16 inch wide, hose end | | | 17 | L18337 | CABLE TIE,9.95"-12.1" lg | STRAP - tie, 15 inch, nylon | | | 18 | D143427 | CLAMP | - tube | | | 19 | 614-8030 | BOLT,Hex, M8 x 1.25 x 30mm, Cl 8.8, Full Thd | - HH, CL 8.8, M8 x 1.25 x 30, Full Thd | | | 20 | D143417 | SPACER,10.31mm ID x 15.88mm OD x 6.4mm L | - 10 ID x 16 OD x 6 mm long, hose clamp | | | 21 | 825-2408 | FLANGE NUT,M8 x 1.25, Flg, Cl 8 | M8 x 1.25", Flg, Cl 8 | | | 22 | 124011A1 | GASKET,149mm L x 64mmL x 5mm L | - at cab floor, heat or air conditioned models, trim center of gasket for air conditioned units | | | 23 | 123980A1 | SHIN | CLAMP - heater and air conditioning hoses | | | 24 | 181979A1 | SEALING STRIP | SEAL - foam | | | 25 | 845-6020 | BOLT,Hvy Hex, M6 x 20mm, Cl 8.8 | - heavy hex flange, 6 - 1.0 x 20 mm | | | 26 | 833-40406 | NUT,M6, U | - U-type, 6 mm - 1.0 | | | 27 | 825-2406 | FLANGE NUT,M6 x 1, Cl 8.8 | | | | 28 | 214-1412 | HOSE CLAMP,#12, 0.69" - 1.25", Type F Worm | CLAMP, HOSE, , If used #12, 0.69/1.25 Type F Worm | | | 29 | 190599A1 | HOSE | - suction, may replace Ref 7 hose on models with heater and air conditioning hoses along left-hand side of chassis, if used, Includes: Ref. 30 - 34 | | | 30 | 128485A1 | O-RING,1.78mm Thk x 14mm ID, 70 Duro | - 9/16 ID x 1/16 inch wide, hose end | | | 31 | 128483A1 | O-RING,1.78mm Thk x 7.65mm ID, 70 Duro | - 5/16 ID x 1/16 inch wide, hose valve core | | | 32 | 1250594C1 | CORE | VALVE - core, hose, low pressure switch | | | 33 | 1250594C1 | CORE | VALVE - core, hose, low side service port | | | 34 | 122553A1 | CAP | - sealing | | | 1954475C1 | ROLL | TAPE - bulk, 63.5 (2-1/2) x 9150 (360) x 3 mm (1/8 inch) thick, insulation | |
|
|