| № | Номер | Название | Опции | Альт |
|---|
| 1 | G101176 | CYLINDER | ASSEMBLY - bucket, 3-1/2" (89 mm) ID x1/2" (775 mm) stroke, Includes: Ref.#2 - 11 | |
| | The cylinder assembly part number is stamped on some cylinder glands and tubes. | | |
| 2 | G32399 | CYLINDER | TUBE ASSEMBLY - cylinder, Includes: Ref.#3 | |
| 3 | D33047 | BUSHING,44.68mm ID x 53.98mm OD x 22.23mm L | - tube | |
| G104402 | GLAND | ASSEMBLY - cylinder, Includes: Ref. 5 - 11 | |
| 5 | NSS | NOT SOLD SEPARAT | GLAND - cylinder | |
| 6 | NSS | NOT SOLD SEPARAT | RETAINING RING - bushing | |
| 6a | G102569 | PLUG | - nylon, thread locking, gland, if used | |
| 7 | D95144 | WIPER SEAL,50.77mm ID x 63.52mm OD x 7.92mm Thk | Wiper - piston rod | |
| | Part of seal kit P/N G105546 | | |
| 8 | G101533 | WEAR RING,Split, 50.8mm ID x 53.87mm OD x 25.15mm Thk | BUSHING - center | |
| | Part of seal kit P/N G105546 | | |
| 9 | D36971 | RING | SEAL - piston rod, wide | |
| | Part of seal piston rod service option P/N G100778 | | |
| | Part of seal kit P/N G105546 | | |
| 9a | G102647 | SEAL | - piston rod, narrow, used in addition to Ref.#9 in some glands | |
| | Part of seal kit P/N G105546 | | |
| 10 | G15457 | O-RING,0.139" Thk x 3.484" ID, -238, Cl 5, 75 Duro | - gland | |
| | Part of seal kit P/N G105546 | | |
| 11 | G32126 | BACK-UP RING,89.28mm ID x 95.38mm OD x 1.4mm Thk | BACKUP RING - gland O-ring | |
| | Part of seal kit P/N G105546 | | |
| 12 | 187-1031 | SELF-TAP SCREW,Pan, 0.164"-32 x 1/4" | SCREW - self-tapping, No. 8 - 32 NC x 1/4", if used, not required when nylon plug is used | |
| 13 | G33162 | ROD | ASSEMBLY - piston, 2" (51 mm) diameter, Includes: Ref.#14 | |
| 14 | D34340 | BUSHING,44.68mm ID x 53.98mm OD x 25.4mm L | - piston rod | |
| 15 | G100694 | PISTON | - cylinder | |
| 16 | G102286 | SEAL,Locking, 85.47mm ID x 90.19mm OD x 6.96mm Thk | - piston | |
| | Part of seal kit P/N G105546 | | |
| 17 | G100710 | RING,Square, 5.28mm Thk x 75.31mm ID | BACKUP RING - piston seal | |
| | Part of seal kit P/N G105546 | | |
| 18 | G100710 | RING,Square, 5.28mm Thk x 75.31mm ID | - wear, piston | |
| | Part of seal kit P/N G105546 | | |
| 19 | 28-1640 | BOLT,Hex, 1" - 14 x 2-1/2", Gr 8 | | |
| 20 | G32303 | WASHER,26.97mm ID x 47.63mm OD x 3.58mm Thk | - hardened | |
| 21 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | GREASE FITTING - straight, 1/8" NPT | |
| 22 | 219-55 | LUBE NIPPLE,90 Degree Elbow, 1/8" - 27 NPTF | NIPPLE, LUBE, 90º, 1/8" NPT x .84" lg | |
| G105546 | SEAL | KIT - seal, Includes: Ref.# 7 - 11, 16, 17 and 18, same as G102402 kit plus Ref.# 9A above | |
| G100778 | SEAL | - piston rod, service option - servere heat or cold, Includes: Ref. 9 | |
