| № | Номер | Название | Опции | Альт |
|---|
| A41239 | SKELETON ENGINE | BLOCK ASSY. - short (Includes stripped block camshaft & gear, crankshaft & brgs., pistons, rings, and connecting rods), Includes: Ref. 1 - 16 | |
| | Spacer (Ref. 16) and loose oil pump gear included with this block assy. are not used on this unit. | | |
| 1 | A41222 | | BLOCK ASSY. - stripped (Casting no. A34970), Includes: Ref. 2 - 16 | |
| 2 | 221-26 | DRAIN PLUG,Sq Soc, 1"-11 1/2, NTPF | PLUG - rear, water gallery (1" P.T. socket hd.) | |
| 3 | 41-1628 | PLUG,Cup, 1 3/4", Stainless | - front, water gallery (1-3/4" cup type) | |
| 4 | A24361 | PLUG | - camshaft hole (2-3/8" cup type) | |
| 5 | 221-1843 | PLUG | - block (3/8" P.T. socket hd.) | |
| 6 | 221-1041 | PLUG | - block (1/8" P.T. slotted hd.) | |
| 7 | A23544 | BUSHING | SET - camshaft | |
| 8 | A24941 | CAP | - crankshaft, bearing, wide | |
| 9 | A24942 | CYLINDER END CAP | CAP - crankshaft bearing narrow | |
| 10 | A24943 | CAP | - thrust bearing, crankshaft | |
| 11 | A34937 | HOLDER | CAP - crankshaft bearing, front | |
| 12 | A27836 | SPECIAL BOLT,5/8" - 11 x 3 1/4" | - bearing cap (5/8 x 3-1/4" N.C. spec.) | |
| 13 | 113-637 | BOLT | - front brg. cap & oil pump (5/8 x 6" N.C. hex.) | |
| 14 | A57454 | SHIM,.005" Thk | Oil pump .005" Thk | |
| 14 | A57455 | SHIM,.010" Thk | Oil pump .010" Thk | |
| 14 | A57456 | SHIM,.025" Thk | Oil pump .025" Thk | |
| 15 | A34540 | TUBE | SOCKET - oil filler & gauge | |
| 16 | A57076 | | SPACER - filler | |
| | Spacer (Ref. 16) and loose oil pump gear included with this block assy. are not used on this unit. | | |
| 22 | A34541 | DIPSTICK | GAUGE ASSY. - oil level, Includes: Ref. 23 | |
| 23 | F62075 | O-RING,0.139" Thk x 0.734" ID, -210, Cl 5, 75 Duro | "O" RING - gauge seal (3/4 x 1 x 1/8") | |
| 24 | A34964 | PLUG | - oil gallery hole | |
| 25 | A27355 | O-RING,0.139" Thk x 1.17" ID, -217, Cl 5, 75 Duro | "O" RING - plug (1-3/16 x 1-7/16 x 1/8") | |
| 26 | A22593 | SET SCREW,1/4" - 18 x 7/8" | - set, plug (1/4" P.T. x 7/8" socket hd.) | |
| 27 | A23656 | COCK, DRAIN | VALVE - drain, cylinder block | |
| 30 | A57416 | | COVER ASSY. - timing gear, Includes: Ref. 31 - 33 | |
| 31 | A27840 | PIN | - locating (5/16 x 3/4") | |
| 32 | A27869 | | BUTTON - thrust | |
| 33 | A57342 | SEAL | - oil, crankshaft front (2-5/8 x 3-5/8 x 1") | |
| 34 | 13-616 | BOLT,Hex, 3/8" - 16 x 1", Gr 5, Full Thd | Cover Hex, 3/8"-16 x 1", G5, Full Thd | |
| 34 | 13-640 | BOLT,Hex, 3/8" - 16 x 2-1/2", Gr 5 | - cover, 3/8 x 2-1/2" N.C. hex. | |
| 35 | 92-6 | LOCK WASHER,3/8" | | |
| 36 | A33018 | GASKET | - timing gear cover | |
| 37 | A20833 | | CAP - opening, timing gear cover, Includes: Ref. 38 | |
| 38 | A27869 | | BUTTON - thrust | |
| 39 | 13-612 | BOLT,Hex, 3/8" - 16 x 3/4", Gr 5, Full Thd | Cap Hex, 3/8"-16 x 3/4", G5, Full Thd | |
| 39 | 13-618 | BOLT,Hex, 3/8" - 16 x 1-1/8", Gr 5 | | |
| 40 | 92-6 | LOCK WASHER,3/8" | | |
| 41 | A27867 | GASKET | -, Serial Range: cap-cover | |
| 42 | A28218 | | POINTER - timing indicator | |
| 43 | 13-48 | BOLT,Hex, 1/4" - 20 x 1/2", Gr 5 | Pointer Hex, 1/4"-20 x 1/2", G5, Full Thd | |
| 44 | 193-44 | LOCK WASHER,Ext-Int Tooth, 1/4" | WASHER - lock, 1/4" int.-ext. Shakeproof | |
| 45 | A7625 | COVER - flange opening L.H. rear | | |
| 46 | A23316 | O-RING,0.139" Thk x 4.484" ID, -246, Cl 5, 75 Duro | "O" RING - cover seal (4-1/2 x 4-3/4" x 1/8") | |
| 47 | 13-618 | BOLT,Hex, 3/8" - 16 x 1-1/8", Gr 5 | Cover Hex, 3/8"-16 x 1 1/8", G5, Full Thd | |
| 48 | 92-6 | LOCK WASHER,3/8" | | |
