| № | Номер | Название | Опции | Альт |
|---|
| 30 | D141468 | PITMAN | LINK, 25 mm wide bushing, bucket guide, with groove for grease seals, Ref. 36, prior to P.I.N. JJG0163952, no longer available, order D150608, Ref. 31A, Includes: Ref. 31 | | | 31 | D140029 | BUSHING,50.22mm ID x 60mm OD x 25.5mm L | 50 mm x 60 mm x 25 mm | | | 31a | D150608 | PITMAN | LINK, 33 mm wide bushing, used without grease seals, bucket guide, P.I.N. JJG0163952 and after, Includes: Ref. 31B | | | 31b | D150122 | BUSHING | 50 x 60 x 33 mm | | | 32 | D150080 | PITMAN | LINK bucket dump, with two bushings at forked end, replaces D140007, Includes: Ref. 33 and 34 | | | 33 | D127172 | BUSHING,44.75mm x 57.15mm OD x 28mm L | 1-1/8 inch, 28 mm, long | | | 34 | D138047 | BUSHING,50.22mm ID x 60mm OD x 54mm L | 2-1/8 inch, 54 mm, long | | | 35 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING grease, straight, 1/8 PT x 21/32 inch | | | 36 | D123655 | SEAL,50mm ID x 60.15mm OD x 4.06mm Thk | grease, if used | | | 37 | D141142 | PIN,50mm OD x 306mm L | 306 mm long, Bucket cylinder rod end to links and, Serial Range: links-dipper | | | 38 | 495-81282 | WASHER,2 1/16" x 3" x .109" | flat, 2-1/16 x 3 x 1/8 inch | | | 39 | D141164 | SPACER,46mm ID x 76mm OD x 2.5mm Thk | 1-13/16 x 3 x 1/8 | | | 40 | 103-16175 | SNAP RING,#175, Ext | Ring, Snap, , Pin #175, Ext | | | 41 | 219-1 | LUBE NIPPLE,1/8" - 27 NPTF | FITTING grease, straight, 1/8 PT x 21/32 inch | | | 42 | 495-81226 | WASHER,46.02mm ID x 63.5mm OD x 3.35mm Thk | - flat, 1-13/16 x 2-1/2 x 1/8 inch | | | 43 | D140886 | SHIM,116mm OD x 1.6mm Thk | SHIM, 1.6 mm thick, wear plate, D149018 inner dipper, Ref. 15 on Figure 9-048 | | | | Part of extendahoe inner dipper assembly kit P/N D103366. | | | | 44 | D140885 | BLOCK | SHIM, 0.8 mm thick, wear plate, D149018 inner dipper, Ref. 15 on Figure 9-048 | | | | Part of extendahoe inner dipper assembly kit P/N D103366. | | | | 45 | D141998 | LARGE PLATE | PLATE wear, plastic, outer | | | | Part of extendahoe inner dipper assembly kit P/N D103366. | | | | 46 | 409-7612 | BOLT,3/8"-16 x 1.09" OAL | hex flange, self-locking, 3/8 NC x 3/4 inch, Replaces 121-228 | | | | Part of extendahoe inner dipper assembly kit P/N D103366. | | | | 47 | D143167 | WASHER | special | | | | Part of extendahoe inner dipper assembly kit P/N D103366. | | | | 48 | D143961 | FLANGE BOLT,Hex, 3/8"-16 x 1/2", Serr | BOLT hex flange, self-locking, 3/8 NC x 1/2 inch | | | | Part of extendahoe inner dipper assembly kit P/N D103366. | | | | 49 | D146288 | PIN,44.45mm OD x 167mm L | Dump Link to Bucket Coupler, if used | | | 50 | 103-16175 | SNAP RING,#175, Ext | Ring, Snap, , If used #175, Ext | | | D140889 | HYDRAULIC VALVE | DIPPER ASSEMBLY extension, inner, with grease seals at dipper pivot, no longer available, order D149018 dipper on Figure 9-048, Includes: Ref. 51 through 54 | | | 51 | NSS | NOT SOLD SEPARAT | DIPPER inner | | | 52 | D141389 | BUSHING | 50 x 34 mm long, dipper cylinder rod end pivot | | | 53 | D135740 | BUSHING,70.19mm ID x 94mm OD x 40mm L | 70 x 36 mm long, to dipper pivot | | | 54 | D127974 | SEAL,67.46mm ID x 80.18mm OD x 3.56mm Thk | grease, 70 mm, dipper pivot | | | 55 | D140873 | BLOCK | SHIM, .8 mm thick, wear plate, D140889 inner dipper, Ref. 51 | | | | Part of extendahoe inner dipper assembly kit P/N D103366. | | | | 56 | D140874 | BLOCK | SHIM, 1.6 mm thick, wear plate, D140889 inner dipper, Ref. 51 | | | | Part of extendahoe inner dipper assembly kit P/N D103366. | | | | D103366 | KEY | KIT extendahoe inner dipper assembly, Includes: Ref. 11, 12, 14 and P/N 244536A1 on Figure 9-048 and Ref. 43 - 48, 55 and 56 on this figure and an instruction sheet | |
|
|